Edimax Technology PT-31W User Manual
PT-31E/PT-31W
Quick Installation Guide
06-2012 / v1.0
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version
2. The program is free software and distributed without any warranty of the author. We
offer, valid for at least three years, to give you, for a charge no more than the costs of
physically performing source distribution, a complete machine-readable copy of the
corresponding source code.
Edimax Technology Co., Ltd.
Add: No. 3, Wu-Chuan 3rd Rd., Wu-Ku Industrial Park, New Taipei City, Taiwan (R.O.C.)
Tel: +886-2-77396888
Email: sales@edimax.com.tw
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission from Edimax
Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties,
either expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability, or fitness for any
particular purpose. Any software described in this manual is sold or licensed
as is. Should the programs prove defective following their purchase, the buyer
(and not this company, its distributor, or its dealer) assumes the entire cost of
all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd.
reserves the right to revise this publication and to make changes from time to
time in the contents hereof without the obligation to notify any person of
such revision or changes.
The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more information about this
product, please refer to the user manual on the CD-ROM. The software and
specifications are subject to change without notice. Please visit our website
www.edimax.com for updates. All brand and product names mentioned in
this manual are trademarks and/or registered trademarks of their respective
holders.
1
PACKAGE CONTENTS
Step 1:
Screw mounting plate A on the wall
via the 4 holes indicated by the
arrows.
Before you start using this product, please check if there is anything missing in
the package, and contact your dealer to claim the missing item(s):
1 x Network camera
1 x Power adapter
1 x Ethernet cable
1 x Mounting kit
1 x CD with utility software and user manual
1 x Quick installation guide
1 x Detachable antenna (PT-31W only)
HARDWARE INSTALLATION
Please follow the instructions to set up your new network camera. If you wish
to place this network camera on a table, please skip steps 1 to 6.
2
Step 2:
Insert mounting plate B into the
slot at the bottom of the network
camera.
Step 3:
Screw mounting plate B to the
network camera via the 2 holes
indicated by the arrows.
Step 4:
Mount the network camera on to
the wall.
3
Step 5:
Screw mounting plate A and B
together via the hole indicated by
the arrow.
Step 6:
When mounted on the wall, the
cables can pass through mounting
plate A as shown in the diagram.
Step 7:
Connect an Ethernet cable to the
network camera via the Ethernet
port.
Note: PT-31E (PoE model)
supports the IEEE 802.3af
PoE standard. It can be
powered via the Ethernet
cable when connected to a
PoE switch.
4
Step 8:
Insert the DI/DO signal cable(s) into
the DI/DO port. If you do not have
DI/DO accessories, you can skip this
step.
Step 9:
Connect the power adapter to the
network camera, then plug the
power adapter into a wall socket.
The camera’s LED lights should light
up after a few seconds, and the
camera will test its pan and tilt
motor within 1 minute. Please do
not obstruct the network camera
while it is testing its pan and tilt
motor.
Step 10:
If you need to set up a wireless
connection, please attach the
wireless antenna to the IP camera
and configure through a wired
connection. (PT-31W only)
5
Loading...