Edimax Technology EU-4230 User Manual 2

Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission of this company.

This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about
this product, please refer to the User's Manual on the CD-ROM. The software
and specifications are subject to change without notice. Please visit our web
site www.edimax.com
product names mentioned in this manual are trademarks and/or registered
trademarks of their respective holders.

for the update. All right reserved including all brand and

1

1. Introduction

It is a combination 10/100M Ethernet adapter and integrated standard-based
3-port USB hub all in one easy to use device. As a fully integrated USB
solution, the new USB/Ethernet adapter allows users to easily connect to the
Ethernet network with a complete out of the box, Plug-N-Play solution.

2. Features

z Complies with IEEE 802.3/802.3u standards
z Complies with USB 2.0 and backward compatible with USB1.1 with data

rates 1.5/12/480 Mbps

z Built in 3 ports USB2.0 hub
z Supports 10/100Mbps auto-negotiation
z Supports bus-powered and self-power mode
z Supports Window 2000/XP/Server 2003/Vista and MAC OS 10.4.x and

above

3. Package Contents

z USB2.0 to Fast Ethernet Adapter with 3-Port USB Hub x1
z Power Adapter x1
z Quick Installation Guide x1
z CD (Driver & Multi-language Quick Installation Guide & User Manual) x1

4. System Requirements

z CPU : Pentium III 1G above or similar
z Memory size : 256MB RAM
z One CD-ROM drive
z Hard Disk : At least 100MB available space
z One available USB port
z OS: Window 2000/XP/Server 2003/Vista or MAC OS 10.4.x and above

2