Edimax Technology ES-5226RS User Manual

X

o

t

e

connection speed. This switch features a store

and-forward

e

r

e

t

s

b

o

t

h

u

i

e

a

ES-5226RS

switching scheme. This allows the switch to auto

learn

filt

ffic b

24 10/100T

GBIC C

Description:

The EW-5226RS is a multi-port Switch that can be used to
This switch is a store-and-forward device that offers low la
workgroup, department or backbone computing environm

The EW-5226RS has 24 auto-sensing 10/100Base -TX RJ-

-

and store source address in a 4K-entry MAC address tabl
This section provides you a few samples of network topolo

5226RS is designed as a segment switch which with its la
it is ideal for interconnecting networking segments.

PC, workstations, and servers can communicate each oth
automatically learns nodes address, which are subsequen
destination address.

By using Uplink port, the switch can connect with another
workgroups to form a larger switched network. Meanwhile,
distance between two switches by connecting with fiber ca
(single-mode fiber).

+ 2 10/100/1000T /Mini-

mbo Web Smart Switch

build high-performance switched workgroup networks.

ency for high-speed networking. The switch is targeted at

nt.
45 ports and 2 auto-detect Gigabit combo ports for higher

.

gy in which the switch is used. In general, the EW­ge address table (4k MAC address) and high performance,

r by directly connecting with EW-5226RS. The switch

y used to

witch or hub to interconnect other small-switched
the user can also use fiber ports to connect switches. The

le can be up to 550 m (multi-mode fiber) or 10 kilometer

er and forward all tra

ased on the

-

ES-5226RS has configure QoS policy priority mode and C
Service) refers to mechanisms in the network software tha
priority. CoS refers to feature sets, or groups of services, t
feature set includes priority transmission, then CoS winds
and switches in the network. In an enterprise network, clas
lower-priority traffic. Tags may be added to the packets to
as do quality of service (QoS) functions, which are implem

Key feature:

• Conforms to IEEE802.3 10Base-T, IEEE802.3u 100Base
IEEE802.3x Flow control and Back pressure, IEEE 802.3

• 24 10/100 TX plus 2 10/100/1000/Mini-GBIC Combo

• Automatic MDI/MDIX supported

• High Switch Fabric up to 8.8Gbps

• N-way Auto-Negotiation supported

• Store-and-Forwarding Switching Architecture

• 4K-entry MAC address table

• Non-Blocking full wire speed architecture

• IEEE 802.3x Flow control:

• Pause-frame for full duplex mode

• Back-pressure for half duplex mode

• Fan free design

S (Class of Service) configuration. QoS(Quality of

make the actual determination of which packets have

at are assigned to users based on company policy. If a
p being implemented in QoS functions within the routers

s of service (CoS) differentiates high-priority traffic from

dentify such classes, but they do not guarantee delivery

nted in the network devices.

-TX, IEEE802.3ab 1000Base-T,IEEE802.3z Gigabit fiber,
d Port Trunk, IEEE 802.1p Class of Service.

Specification

IEEE802.3x Flow control and

u

t

e

r

e

e

10/100/1000T/ Mini

GBIC C

g

4

a

Port Trunk

Trunk groups up to 3

M

aximu

a

o

Low priority packet), 8:1(8 Hig

f

n

r

MAC Add

Filteri

All

r

e

Back pressure

)

trunk port members up to

4

priority then 1 Low priority packet)

ith

Standard IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3z Gigabit fiber

IEEE802.3ad Port Trunk
IEEE802.1p Class of service

Connector 10/100TX: 24 x RJ-45 with A

10/100/1000T/ Mini-GBIC Co
SFP sockets

Transfer Rate 14,880pps for Ethernet port

148,800pps for Fast Etherne
1,488,000pps for Gigabit Eth

to MDI/MDI-X function

mbo: 2 x RJ-45 with Auto MDI/MDI-X function + 2 x 1000

port

rnet port

Switch architecture Store and forward architectu
Back-plane 8.8Gbps with full wire speed.
MAC address 4K MAC with Auto learning
Flash ROM 512Kbytes
LED Per unit: System power (Gre

10/100TX Port: Activity/ Dupl

­Power Supply 100~240VAC 50/60Hz
Power Consumption 15.4watts (imum)
Operation Temp. 0℃ to 45℃ (32℉ to 113℉)
Operation Humidity 10% to 90% (Non-condensin
Storage Temp. -40℃ to 70℃
Dimension 440mm(W) x 120mm(D) x 4
Installation 19 “EIA /TIA Rack design,
EMI FCC Class A, CE
Safety UL, cUL, CE/EN60950-1

Software Feature

Management Web management
Port configuration Link speed, k mode, Port dis

negotiation

.
LACP Support LACP
VLAN Port Based VLAN, 802.1Q T

VLAN entry up to 32.

QOS 1) Port based priority. 2) 802.
Class of Service System provides 2 queues fo

Support priority weighted rati

Bandwidth control Each port’s bandwidth is con

Rate limit from32Kbps to 256

DHCP
Broadcast Storm filter Disable or Enable.
Port Mirror Global System support 3 mir

ress

Firmware Upgrade Support Web firmware updat

ng

Provide DHCP Client functio

entries up to 26.

ow a network administrato

the MAC address..

e.

n)

x (Green), Speed (Amber)

o

mbo: Activity/ Duplex (Green), Speed (Green

)

mm(H)

ble/Enable, Port Flow control disable/Enable, Port Auto

g VLAN

1p priority tag
r High and Low priority.

n (H /L): 1:0(always high priority), 4:1(4 High priority then 1

igurable on both ingress and egress traffic independently.

Kbps

s

oring type RX, TX and both packet. The maximum of mirror

permit and deny network access to hosts associated w

, backup and restore.

.