Schnellinstallationsanleitung
07-2017 / v4.0
Edimax Gemini
Home-WLAN-Roaming Upgrade-Kit
RE11
1. Verpackungsinhalt
RE11S (2 St.)
Antenne (4 St.)
Ethernetkabel
Karte mit Zugangsschlüssel
CD mit mehrsprachiger
Schnellinstallationsanleitung
und Benutzerhandbuch
Schnellinstallationsanleitung
① LED Signal 5GHz
② LED Signal 2,4GHz
③ LED Roaming-Status
④ Power-LED
⑤ WPS-LED
① LAN-Anschluss
② Hardwareschalter
③ Antenne (abnehmbar)
④ Netzanschluss
2. RE11S – Ü berblick
1
⑥ LAN-LED
⑦ WPS-Taste
3. Erläuterung der LEDs
LED / Symbol
Status
Anzeige
Wi-Fi
An
Langsam blinkend
Schnell blinkend
Aus
Hervorragend
Gut
Schlecht
Kein Signal
Roaming
An
Schnell blinkend
Aus
Master-Verhalten
Datensynchronisierung läuft
Slave-Verhalten
Power
An
Langsam blinkend
Schnell blinkend
Aus
System wird hochgefahren
System wird initialisiert
Werksstandardwerte werden wiederhergestellt
Power Aus
WPS
An
Langsam blinkend
Aus
WPS-Verbindung erfolgreich (bleibt 30 Sekunden an)
WPS-Verbindung wird hergestellt
WPS-Funktion inaktiv
LAN
An
Aus
LAN-Anschluss ist angeschlossen
LAN-Anschluss ist nicht angeschlossen
Anschluss / Taste
Beschreibung
LAN-Anschluss
Wenn der RE11S auf den “Access Point-Modus” eingestellt ist, verbinden
Sie diesen Anschluss mit dem Breitband-Router
Wenn der RE11S auf den “Extender-Modus” eingestellt ist, kann dieser
Anschluss für Nur-LAN-Geräte genutzt werden
WPS-Taste
WPS-Funktion: Taste 1-3 Sekunden lang gedrückt halten, um WPS zu
aktivieren
Funktion Werksstandardwerte wiederherstellen: Diese Taste mehr als 10
Sekunden lang gedrückt halten
Hardwareschalter
Rechte Position (Normaler Modus): 100% Drahtlos-Ausgangsleistung
4. Erläuterung der Hardware
2
Mittlere Position (Ö ko-Modus): 50% Drahtlos-Ausgangsleistung
Linke Position (Ruhemodus): Wireless-Funktion ausgeschaltet
3
5. Installation
Schritt 1: Schalten Sie den Master RE11S ein
Schalten Sie den RE11S ein, indem Sie ihn mit einer
Steckdose verbinden, und warten Sie, bis die
Power-LED leuchtet.
Schritt 2: Stellen Sie den Master-RE11S auf den AP-Modus ein:
1. Verbinden Sie den RE11S über den entsprechenden LAN-Anschluss
mit dem LAN-Router.
2. Warten Sie, bis der Verbindungsstatus für 5G und 2.4G angezeigt
wird (d.h. beide LEDs müssen leuchten).
3. Verbinden Sie ein Drahtlosgerät mit dem RE11S, um die
Internet-Konnektivität zu überprüfen.
HINWEIS: Den
WLAN-Benutzernamen und das
Passwort finden Sie auf der
Access Key Card in der
Verpackung.
Beispiel:
Einstellung der RE11S als eine Kombination aus
AP-Modus und Extender-Modus, um die
5.1 Szenario A
4
Schritt 3: Stellen Sie den zweigen RE11S auf den Extender-Modus ein:
1. Schalten Sie den zweigen RE11S ein, indem Sie ihn mit einer Steckdose in der Nähe des Master-Geräts
verbinden, und warten Sie, bis die Power-LED leuchtet.
2. Halten Sie die WPS-Taste am Master RE11S 3 Sekunden lang gedrückt.
3. Drücken Sie innerhalb von 2 Minuten die WPS-Taste am zweiten RE11S und halten Sie sie gedrückt. Die
LEDs für 5G und 2,4G sollten zu Anfang beide leuchten.
4. Die Einrichtung ist abgeschlossen, wenn entweder a) nur noch eine der LEDs blinkt, oder b) nur eine
der LEDs dauerhaft leuchtet.
HINWEIS: Gehen Sie zurück
zu Schritt 2, wenn beide
LEDs weiterhin blinken
Schritt 4: Umstellen des zweiten RE11S
1. Stellen Sie den zweiten RE11S an einem anderen Ort auf, um die gewünschte Abdeckung zu
ermöglichen.
Um eine maximale Abdeckung zu erreichen, stellen Sie den RE11S an einen Ort, wo die Signalstärke
"Gut" ist.
2. Achten Sie auf das Verhalten der WLAN-LED, um festzustellen, ob der Ort gut geeignet ist.
3. Wiederholen Sie Schritt 2, falls das Signal schlecht ist.
HINWEIS:
WLAN-LED
Verbindungsqualität
An
Hervorragend
Langsam
blinkend
Gut
Schnell
blinkend
Schlecht
Aus
Kein Signal
5
Herzlichen Glückwunsch!
Ihr Heim-WLAN-System ist fertig eingerichtet! Jeder Benutzer benötigt nur einen Netzwerknamen und das
Passwort für Ihr WLAN-System.
Schritt 1: Schalten Sie den Master RE11S ein
Schalten Sie den RE11S ein, indem Sie ihn mit einer
Steckdose verbinden, und warten Sie, bis die
Power-LED leuchtet.
Schritt 2: Stellen Sie den Master-RE11S auf den AP-Modus ein:
1. Verbinden Sie den RE11S über den entsprechenden LAN-Anschluss
mit dem LAN-Router.
2. Warten Sie, bis der Verbindungsstatus für 5G und 2.4G angezeigt
wird (d.h. beide LEDs müssen leuchten).
3. Verbinden Sie ein Drahtlosgerät mit dem RE11S, um die
Internet-Konnektivität zu überprüfen.
HINWEIS: Den
WLAN-Benutzernamen und das
Passwort finden Sie auf der
Access Key Card in der
Verpackung.
Beispiel:
Einstellung beider RE11S auf den AP-Modus, um die
Drahtlosabdeckung in einem Gebäude zu erweitern
5.2 Szenario B
6
Schritt 3: Stellen Sie den zweiten RE11S auf den AP-Modus ein:
1. Schalten Sie den zweiten RE11S ein, indem Sie ihn mit einer Steckdose verbinden, und warten Sie, bis
die Power-LED leuchtet.
2. Verbinden Sie den RE11S über den entsprechenden LAN-Anschluss mit dem LAN-Router.
3. Warten Sie, bis der Verbindungsstatus für 5G und 2.4G angezeigt wird (d.h. beide LEDs müssen
leuchten).
Herzlichen Glückwunsch!
Ihr Heim-WLAN-System ist fertig eingerichtet! Jeder Benutzer benötigt nur einen Netzwerknamen und das
Passwort für Ihr WLAN-System.
7
Häufige Fragen (FAQ)
1. Ich gelange nicht zur Anmeldeseite, wenn ich http://edimaxext.setup im Browser öffne, was soll
ich machen?
A: Probieren Sie in einer solchen Situation bitte eine der folgenden Methoden aus:
- Stellen Sie sicher, dass Ihr Computer mit dem RE11S Drahtlosnetzwerk verbunden ist.
- Stellen Sie sicher, dass Ihr Computer auf die Optionen “IP-Adresse automatisch beziehen” und
“DNS-Serveradresse automatisch beziehen” eingestellt ist.
2. Ich habe kein Zugriff mehr auf den RE11S. Eventuell habe ich bei der Einrichtung eine falsche
Passphrase oder einen falschen Sicherheitsschlüssel am RE11S eingegeben (die
Sicherheitsstufe meines Routers ist WEP). Was soll ich machen?
A: Da der RE11S keine WEP-Passphrase überprüfen kann, wäre Ihr Drahtlosgerät bei Eingabe einer
falschen Passphrase nicht in der Lage, die richtige IP-Adresse vom RE11S zu erhalten. Bitte setzen Sie
den RE11S auf die Werkseinstellung zurück und führen Sie die Einrichtung erneut durch.
3. Wie setze ich den RE11S auf die Werksstandardeinstellung zurück?
A: Halten Sie die WPS-Taste mehr als 10 Sekunden gedrückt, bis die Power-LED langsam zu blinken
beginnt.
4. Was kann ich tun, wenn ich mein Anmeldepasswort vergessen habe?
A: Es gibt keine Möglichkeit, das Anmeldepasswort abzurufen; bitte setzen Sie den RE11S auf die
Werkseinstellung zurück und führen Sie die Einrichtung erneut durch.
5. Wie lautet die Standardeinstellungen für den Benutzernamen und das Passwort für die
Web-Anmeldung?
A: Der Standardbenutzername ist “admin” und das Passwort ist “1234”.
6. Was kann ich tun, wenn ich mein Drahtlospasswort vergessen habe?
A: Die Werkseinstellung für den Namen des Drahtlosnetzwerks und die Sicherheitsfunktion ist auf das
Etikett des Extenders aufgedruckt; falls das Passwort geändert wurde, verbinden Sie bitte Ihren
Computer über ein Ethernetkabel mit dem RE11S und gehen Sie dann wie folgt vor:
1. Gehen Sie zu http://edimaxext.setup und melden Sie sich mit Benutzername und Passwort an.
2. Für die 2,4G Drahtlosfunktion gehen Sie zu 2.4GHz Wireless > Basic Setting (2,4GHz Drahtlos >
Basiseinstellung), um Ihr Drahtlospasswort abzurufen oder zurückzusetzen.
Für die 5G Drahtlosfunktion gehen Sie zu 5GHz Wireless > Basic Setting (5GHz Drahtlos >
Basiseinstellung), um Ihr Drahtlospasswort abzurufen oder zurückzusetzen.
7. Wie erhalte ich weitere Informationen?
A: Es gibt verschiedene Methoden, um weiterführende Informationen zu erhalten:
1. Dekodieren Sie den QR-Code auf der rechten Seite (mit einem Smartphone,
Tablet, PC usw.) und tippen bzw. klicken Sie auf das Download-Symbol ,
um das RE11S Benutzerhandbuch herunterzuladen; oder
8
2. Besuchen Sie folgenden Link und tippen bzw. klicken Sie auf das Download-Symbol , um das
RE11S Benutzerhandbuch herunterzuladen:
http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/whole
_home_wifi_system/whole_home_wifi_system_ac1200_dual-band/re11s oder
3. Für technische Unterstützung tippen bzw. klicken Sie auf den folgenden Link für
Support-Informationen, um einen technischen Kundendienst in Ihrer Nähe zu finden:
http://www.edimax.com/edimax/post/post/data/edimax/global/worldwide_contact/
9
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or modifications not expressly approved by
the party responsible for compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 2.5cm (1 inch) during normal operation.
Federal Communications Commission (FCC) RF Exposure Requirements
SAR compliance has been established in the laptop computer(s) configurations with PCMCIA slot on the side near the
center, as tested in the application for certification, and can be used in laptop computer(s) with substantially similar
physical dimensions, construction, and electrical and RF characteristics. Use in other devices such as PDAs or lap
pads is not authorized. This transmitter is restricted for use with the specific antenna tested in the application for
certification. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment.
All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use
of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and
Switzerland.
EU Countries Not Intended for Use
None
10
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2006/95/EC, 2011/65/EC.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive
2006/95/CE, 2011/65/CE.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2006/95/ES, 2011/65/ES.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi
Dyrektywą UE 2006/95/EC, 2011/65/EC..
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2006/95/CE, 2011/65/CE.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2006/95/EC, 2011/65/EC.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2006/95/EK, 2011/65/EK).
Türkçe: Bu cihaz 2006/95/EC, 2011/65/EC direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2006/95/EC, 2011/65/EC.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc 2006/95/ES,
2011/65/ES.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2006/95/EC, 2011/65/EC.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 2006/95/EC, 2011/65/EC.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili della
Direttiva 2006/95/CE, 2011/65/CE.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2006/95/EC, 2011/65/EC..
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2006/95/EC, 2011/65/EC.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2006/95/EC, 2011/65/EC.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2006/95/EG, 2011/65/EG.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2006/95/EC, 2011/65/EC.
suomen kieli: Tämä laite täyttää direktiivien 2006/95/EY, 2011/65/EY oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
11
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directives.
Equipment:
AC1200 Wi-Fi Roaming Mesh Extender
Model No.:
RE11S
The following European standards for essential requirements have been followed:
Spectrum:
ETSI EN 300 328 V1.9.1
ETSI EN 301 893 V1.8.1
EMC:
EN 301 489-1 V1.9.2 (2011-09);
EN 301 489-17 V2.2.1 (2012-09)
EMF:
EN 62311:2008
Safety (LVD):
IEC 60950-1:2005 (2nd Edition) )+Am 1:2009+Am 2:2013 and
or EN-60950-1:2006+A11:2009+A1:2010+ A12:2011+
A2:2013
Edimax Technology Co., Ltd.
No. 3, Wu Chuan 3rd Road,
Wu-Ku Industrial Park,
New Taipei City, Taiwan
Date of Signature:
Oct., 2016
Signature:
Printed Name:
Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
12
Notice According to GNU General Public License Version 2
This product includes software that is subject to the GNU General Public License version 2. The program is free software and
distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than
the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
Das Produkt beinhaltet Software, die den Bedingungen der GNU/GPL-Version 2 unterliegt. Das Programm ist eine sog. „Free
Software“, der Autor stellt das Programm ohne irgendeine Gewährleistungen zur Verfügung. Wir bieten Ihnen für einen
Zeitraum von drei Jahren an, eine vollständige maschinenlesbare Kopie des Quelltextes der Programme zur Verfügung zu
stellen – zu nicht höheren Kosten als denen, die durch den physikalischen Kopiervorgang anfallen.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for
all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program
whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure
that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source
code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know
you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights
that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so
they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The ‘“Program’“, below, refers to any such program or work, and a
‘“work based on the Program’“ means either the Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term ‘“modification’“.) Each licensee is addressed as ‘“you’“.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based
on the Program (independent of having been made by running the Program). Whether that is true depends on what the
Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program
a copy of this License along with the Program.
13
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running
for such interactive use in the most ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do
not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a
whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is
to exercise the right to control the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus
the scripts used to control compilation and installation of the executable. However, as a special exception, the source code
distributed need not include anything that is normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
14
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is
intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is
implemented by public license practices. Many people have made generous contributions to the wide range of software
distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he
or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to
it and ‘“any later version’“, you have the option of following the terms and conditions either of that version or of any later
version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may
choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM ‘“AS IS’“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
15
Loading...