Edimax IC-1510, IC-1510WG Quick Installation Manual

Multi-Languages QIG in Driver CD

==================================================

Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s

ovladači

Deutsch: Finden Sie bitte das deutsche QIG beiliegend in der Treiber CD

Español: Incluido en el CD el QIG en Español

Français: Veuillez trouver l‟français QIG ci-joint dans le CD

Italiano: Incluso nel CD il QIG in Italiano

Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n

Nederlands: De nederlandse QIG treft u aan op de bijgesloten CD

Polski: Skrócona instrukcja instalacji w języku polskim znajduje się na

załączonej płycie CD

Português: Incluído no CD o QIG em Portugues

Русский: Найдите QIG на pусскoм языке на приложеном CD

Romana: Cd-ul cuprinde Ghid de instalare rapida in limba romana

Slovensky: Anglického sprievodcu rýchlou inštaláciou nájdete na priloženom

CD s ovládačmi.

Türkçe: Ü rün ile beraber gelen CD içinde Türkçe Hızlı Kurulum Kılavuzu'nu

bulabilirsiniz

Linux Open Source Code

Certain Edimax products include software code developed by third
parties, including software code subject to the GNU General Public
License ("GPL") or GNU Lesser General Public License ("LGPL").
Please see the GNU (www.gnu.org) and LPGL
(www.gnu.org) Websites to view the terms of eachlicense.

The GPL Code and LGPL Code used in Edimax products are distributed
without any warranty and are subject to the copyrights of their authors.
For details, see the GPL Code and LGPL Code licenses. You can
download the firmware-files at

http://www.edimax.com under "Download" page.

Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language or computer language, in any form or
by any means, electronic, mechanical, magnetic, optical, chemical, manual or
otherwise, without the prior written permission of this Company.

This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly
different from those shown in this QIG. For more detailed information about
this product, please refer to the User's Manual on the CD-ROM. The software
and specifications could be subjected to change without notice. Please visit
our web site www.edimax.com for the update. All right reserved including all
brand and product names mentioned in this manual are trademarks and/or
registered trademarks of their respective holders .

Content

1. Product Information ........................................................................... 1

2. Check your package contents ............................................................ 1

3. System Requirement ......................................................................... 1

4. Hardware Installation ......................................................................... 2

4.1. LED and Focusing ....................................................................... 2

4.2. Camera Ports .............................................................................. 3

4.3. Installation Procedure .................................................................. 4

5. Locate the IP Address ........................................................................ 5

6. Web Management Interface............................................................... 9

7. Software Installation ........................................................................ 12

8. Network Configuration ..................................................................... 18

8.1.1. Network Setting ................................................................... 19

8.1.2. Wireless Settings (IC-1510Wg Only) ................................... 21

9. Firmware Upgrade ........................................................................... 24

1. Product Information

 Complies with IEEE802.3, 802.3u standards
 Complies with Wireless 802.11b/g standards with WEP, WPA and WPA2

encryption (IC-1510Wg only)

 Supports high speed hardware-based Motion-JPEG compression
 Supports video resolution :640x480 (VGA), 320x240 (CIF) and

160x120(QCIF)

 Supports Snapshot-to-Email on events and predetermined schedule

recordings in AVI format

 Supports Auto Brightness/Contrast/Hue Control
 Built-in manual focus lens

2. Check your package contents

 One Internet Camera
 One Power Adapter
 One Camera Stand
 One 100cm Category 5 Ethernet Cable
 One Quick Installation Guide
 One CD (Including User‟s Manual/ Multi-Language QIG/ Utility & Viewer)
 One Antenna(* IC-1510Wg Only)

If any of the above items are missing, please contact your supplier.

3. System Requirement

System requirement for PC, MAC or Notebook PC to access the Internet
Camera as following:

 OS System: Windows 98, ME, 2000, XP + SP2, Server 2003
 CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above
 Memory Size: 128MB (256MB recommended)
 VGA Card Resolution: 800 x 600 or above

1

Focus Ring

LED Green:
LAN Activity

LED Amber:
WLAN Activity

LED Blue:
Power On

Wireless SMA
Connector
(*IC-1510Wg Only)

4. Hardware Installation

4.1. LED and Focusing

The Camera head and its focus ring allow you to modify the aim and focus of
the Camera. To adjust the Camera‟s focus, rotate the dark focus ring.

There are three LEDs indicating the camera status and networking status.

 Power

When the camera is power on and ready for access, the LED will light.

 LAN

When the Internet Camera is linking to wired network, the LED is lighting.
The LED is flashing when video is transmitted or received through wired
network.

 WLAN

When the Internet Camera is linking to wireless network, the LED is
lighting. The LED is flashing when video is transmitted or received through
wireless network.

Reset Button

LAN Port

Power

Antenna connector

4.2. Camera Ports

The Camera features two ports and a Reset button.

 Antenna connector

The Standard reverse SMA connector is for any antennas with reverse
SMA connector can connect to the Internet Camera.

 Power

The Power port is where you can connect the power adapter.

 LAN

The LAN port is where you can connect the Ethernet network cable.

 Reset

1. If problems occur with your Internet Camera, press the reset button
with a pencil tip (for less than 2 seconds) and the Internet Camera will
reboot itself with your configurations.

2. If problems persist or you experience extreme problems or you forgot
your password, press the reset button for longer than 5 seconds.
The Internet Camera will reset itself to the factory default settings
(warning: your original configurations will be replaced with the factory
default settings).

4.3. Installation Procedure

1. Unpack the Internet Camera package and verify that all the items listed in
the Chapter 1 are provided.

2. Connect the Internet Camera to your network by attached the network
cable from the switch/router to the LAN port of the Internet Camera.

3. Connect the power adapter to the Internet Camera and plug the power
adapter to power outlet. The Internet Camera will be powered on. When the
Internet Camera is ready, the Ready LED will light.

Note: It is highly recommended to use the power adapter shipped with the
Internet Camera, do NOT use any other power adapter from any sources.

5. Locate the IP Address

Default IP address of this IP camera is 192.168.2.3. If you wish to assign
another IP address to this IP camera, you have to log onto the web
configuration interface of the camera first.
If the left three fields of the IP address of your computer is not 192.168.2.XXX ,
you‟ll have to change the IP address of your computer first:

1. Click „Start‟ -> „Control Panel‟

2. Double-click „Network Connections‟ icon.

3. Right-click „Local Area Connection‟, and click „Properties‟.