WWhhaatt iiff tthhee ppaasssswwoorrdd ooffffeerreedd iinn tthhee mmaannuuaall ffaaiillss ttoo llooggiinn
TThhiiss FFAAQQ aapppplliieess ttoo tthhee ffoolllloowwiinngg mmooddeellss::
IICC--11550000 sseerriieess
IInnttrroodduuccttiioonn:
When trying to login to the IC-1500 using the shipping utility, the default
password “ 1234 “ fails (as illustrated in the Figure-1), please upgrade the IC-1500
based on the following steps.
:
:
SStteepp bbyy SStteepp:
Step 1 :
Download the latest firmware (v1.27 or above) and software (v1.49 or
above) at the following link
http://www.edimax.com/en/support_detail.php?pd_id=54&pl1_id=8&pl2_id=35
Step 2 :
Step 3 :
Run the installation Wizard (setup1.ext) downloaded from the above
Step 1
Execute (double-click) the “Setup1.exe” file. When this window pops up
requesting the password, please click the “OK” button leaving the
password box blank as shown in the Figure-2.
link.
Step 4 :
Step 5: Reset the IC-1500 by hold down the “reset”button in the rear panel
Conduct the firmware upgrade (downloaded at the above
by clicking the “Firmware Update” button.
for 10 seconds when the power is on.
Step 1
link.)
All the required steps are completed. Now, the default “1234” works for
logging into the IC-1500. Edimax appologize for bring you so much trouble.
Loading...