Edimax HP-5102ACK Specifications

500Mbps Nano PowerLine Adapter Kit

with Integrated Power Socket

Transmit Network Data via Existing Electrical Wires

The Edimax HP-5102AC can transform the existing electrical wires in your home or office into a high-speed
network. Complicated, disruptive and unsightly cabling is no longer necessary - if your home or office doesn’t
have an existing Ethernet cable infrastructure, the HP-5102AC enables you to create a network environment
easily and cost-effectively.

Integrated Power Socket with Noise Filter

With the Edimax HP-5102AC, no electrical outlet goes to waste. It is built with an integrated power socket,
which you can use with any electrical device. So even when the HP-5102AC is plugged into a socket, you can
still plug another electrical device into the HP-5102AC and have your usual socket capacity. The in-built noise
filter also ensures that you do not experience a sudden drop of network speed when a high power consuming
electrical device is being used.

PowerLine Adapter Kit

Included are two Edimax HP-5102AC adapters; everything you need to set up a powerline connection. One
adapter connects to your router, and the other to your network device. Or, if you already have a powerline
network established, you can use the HP-5102AC adapters for additional network devices. The Edimax HP­5102AC has a combo group/reset to automatically sync your HP-5102AC adapters into your network, and up to
8 powerline adapters can be used together across your home or office, using advanced 128-bit AES secure
encryption.

Key Features:

• Easy plug-n-play setup and 128 bit AES security

• Maximum powerline speed of 500Mbps

• Backward compatible with 200Mbps powerline adapters

• Features energy saving mode to reduce power consumption

• Utilizes existing electrical wires to transmit network data

• Powerline transmission range up to 300 meters

• Integrated power socket with noise filter

HP-5102ACK

www.edimax.com

Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.

FEATURES & TECHNICAL SPECIFICATIONS

Hardware Standards Effect Data Rate

1 x Power jack
1 x Power socket
1 x 10/100Mbps Ethernet LAN port
1 x Group/Reset button
LED indicators: power, Ethernet, powerline

IEEE 1901
IEEE 802.3
IEEE 802.3u
HomePlug AC compliant

TCP: Up to 95 Mbps effective throughput
UDP: Up to 95 Mbps effective throughput

Frequency Band Modulation Schemes Operating Range

2-28MHz (with Mask) OFDM symbol modulation on line

synchronization 1024/256/64/16/8-QAM,
QPSK, BPSK, ROBO modulation

Up to 300 meters

QoS Nodes IGMP

4 levels priority based contention access,
and multi segment bursting
8 levels VLAN priority field, TOS field
QoS Classification by destination MAC
address and IP port

Up to 15 slaves with 1 master, 16 total
devices
Max 8 bridged devices per station

Support for IPv4/IGMPv1,v2,v3 snooping
Support for IPv6 and MLDv1, v2 snooping
Max 16 source addresses and group
members

IC / Memory Security Temperature & Humidity

AR7420+1540
1MB Flash
8MB SDRAM

128-bit AES link encryption with key
management

0-45 degrees Celsius
10-90% (non-condensing)

Power Outlet Dimensions & Weight Power Consumption

Line Voltage: 100 to 240VAC
Noise Filter Insertion Loss: Up to 35dB at
1MHz – 40MHz

102 x 64 x 43mm
184g

4W

Power Source Certification

100-240V AC, 50-60Hz

CE, FCC, LVD

www.edimax.com

500Mbps Nano PowerLine AdapterKit

with Integrated Power Socket

HP-5102ACK

Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.

NETWORK SETUP DIAGRAM

• Plug a HP-5102AC into a power outlet and connect it to a broadband
router.

• Plug another HP-5102AC to a power outlet and connect it to a
computer's Ethernet port to establish a powerline connection.