Edimax GS-1026 V2 operation manual

GS-1026

Quick Installation Guide

01-2016 / v2.0

Product Information

Package Contents

Before you start using this switch, please check if there is anything missing in
the package, and contact your dealer to claim the missing item(s):

 GS-1026 Switch
 Quick Installation Guide
 Power Cord
 Rubber Feet and Rack Mount Kits

GS-1026 Key Features

 Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3z

standards

 24 Gigabit Ethernet ports with 2 Gigabit SFP slot ports
 Supports auto MDI/MDI-X crossover detecting and auto correction
 9K jumbo frames to increase data transfer rates
 Supports 8K MAC address auto-learning and auto-aging
 Wire-speed packet filtering and forwarding rate
 Supports IEEE802.3az energy efficient Ethernet function

Front Panel

Please refer to the following description for the front panel:

Ethernet Ports: This Switch includes 24* Gigabit Ethernet ports and 2*SFP ports.

2

LED

Light
Status

Description

Power
On

Switch on and correctly powered

Off

Switch not powered or not correctly powered

LNK/ACT

On

The port connected

Off

The port not connected

Flashing

The port is activating and transferring /receiving
data.

LED Definition:

Rear Panel

AC

AC IN : This connects to AC power source. Supported input voltages range
from 100 ~ 240V AC at 50 ~ 60Hz.

Power Connector

Plug in the female connector of the provided power cord into this connector,
and the male into a power outlet. Supported input voltages range from
100-240V AC, and 50-60 Hz.

3