Edimax GS-1008PH V2 Service Manual

8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

GS-1008PH V2

802.3af

15.4W

802.3at

30W

100M/

1000M

PoE

Distance

200M

Fan-

Less

VLAN

QoS

8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

Introduction

The Edimax GS-1008PH V2 is an eight port Fast Ethernet switch with four PoE+ Ports designed for use in home,
small or medium sized network environments. With four DIP switches, PoE ports can be manually set with
on/off control, extending PoE delivery distance up to 200 meters and port-based on/off control for VLAN and
QoS is also supported. The switch easily connects and supplies power to PoE-enabled devices such as wireless
access points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers,
printers or network attached storage (NAS). The compact size and fan-less design make the switch an ideal

solution for expanding home and small business networks.

Power over Ethernet (PoE+) Auto Detection

Features eight IEEE 802.3at Power over Ethernet (PoE+)
ports which supply up to 30 watts of electricity per port.

It can convert standard 100‐240V AC power into
low‐voltage 50 - 57V DC electricity to power IEEE 802.3at

compliant network accessories via existing LAN cables.
With PoE detection capability, the GS-1008PH V2 is able
to verify whether the connected device is IEEE 802.3at
compliant. In the event that a PoE device is not detected,
only network data will be transmitted through the LAN
cable – meaning easy setup and management of network

devices such as access points and network cameras.

*IP Phone: 3- 7W, IP Camera: 7- 10W PZT Camera: 15 -25+ W
*Access Point: 8W for 802.11a/g radios; upwards of 20W for 802.11n radios

The guidelines are meant to provide general estimates for power consumption. Actual power requirements vary and should
be confirmed for each model when determining your PoE budget requirements.

1

1

www.edimax.com

8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

PoE Ports 1 – 2 Power + Data extend

As a normal PoE switch

PoE Ports 3 – 4 Power + Data extend

As a normal PoE switch

Ports 1 – 4 VLAN enabled

Ports 1 – 4 VLAN disabled

QoS (Video & Voice Traffic High Priority) enabled

QoS disabled

GS-1008PH V2

Power and Data Distance Extension

The built-in DIP switch provides extended operation modes on switch 1 & 2. The GS-1008PH V2 operates as a
“standard” IEEE 802.at/af PoE Switch when DIP switches are off. With switches on, the GS-1008PH V2 operates
on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of
up to 200 meters, overcoming the 100m limit on Ethernet UTP cables. With this brand-new feature, the GS­1008PH V2 provides an additional solution for 802.3at/af PoE distance extension and saves costs of Ethernet

cable installation.

DIP Switch Status Description

DIP Switch

1. PoE Extend

2. PoE Extend

3. VLAN

4. QoS

1

PoE Extend

2

PoE Extend

3

VLAN

4

QoS

On

Off
On
Off
On
Off
On
Off

Innovative Port-based VLAN features

The GS-1008PH V2 features port-based
VLAN where ports can be isolated from each
other via DIP switch port 3. This can help to

prevent IP camera’s multicast or broadcast

storms from affecting each other.

Hardware QoS for Video & Voice Traffic
Priority

Supports 802.1p QoS via DIP switch port 4. This
ensures first priority for video and voice traffic.

2

High Priority

Media Streaming

VoIP

Web Browsing
Email & Downloading
Data Transfer

Low Priority

www.edimax.com

8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

GS-1008PH V2

CCTV Mode

The unique CCTV-mode DIP switch function is ideal for surveillance networking environment. Switching all DIP
switches to on enables CCTV mode which gives multi-function PoE + data extension, Port Isolation and QoS on
the GS-1008PH V2. When using video surveillance systems for homes, business or institutions, the CCTV mode
provides better speeds for multicast viewing and easier installation. Setting all DIP switches back to off quickly
changes the GS-1008PH V2 back to normal for general-use data transmission.

Plug & Play, No Installation Required

Just plug Ethernet or PoE enabled devices into the switch. Data and power can be transmitted through existing
standard Cat-5e Ethernet cables with no additional cables or configuration required. The GS-1008PH V2
reduces the difficulty, time and cost of network setup.

Flexible Network Deployment & Energy Efficient

A fast and effective solution when power outlets are unavailable for your network devices. The switch
additionally supports IEEE 802.3az Energy Efficient Ethernet which allows for less power consumption and
reduced costs during periods of low data activity.

Fan-Less Quiet & Compact Design

A fan-less design ensures quiet operation and enables an even more compact design, keeping valuable desk
space free in home or small office environments.

FEATURES

• Eight 10/100/1000Mbps Gigabit ports and four PoE+ ports.

• IEEE 802.3af/at PoE compliant (ports 1 - 4) for simplified deployment and installation.

• Up to 30W per PoE port (total power budget: 70W) for powering PoE-enabled devices.

• Auto-detection of powered devices (PD) and power consumption levels.

• Hardware DIP switch for “Standard” and “Extend” mode selection; the “Extend” mode features 30-watt PoE

transmit distance of 200m at speed of 10Mbps.

• Port-based VLAN and Loop Protection features.

• Supports 802.1p Quality of Service (QoS).

APPLICATION DIAGRAM

3

www.edimax.com

8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

Hardware

Ports

8 RJ-45 10/100/1000Base-T ports
4 RJ-45 10/100/1000Base-T PoE+ ports

Transmission Method
Store and forward

LED Indicators

Power: Green LED
LNK/ACT: Green LED (Port 1 – Port 8)
PoE: Green LED (Port 1 – Port 4)
PoE Alert: Green LED (PoE overload alarm)

Fan

Fanless

DIP Switch

PoE Extend, VLAN, QoS
Power Requirements

Input: 100-240V AC
Power Supply: 80W

Power Consumption

5W

Dimensions (L x W x H)

215.5mm x 133mm x 42mm

Weight
927 g

Performance

Switching Capacity

16G

MAC Address

8K

Buffer Memory

128Kb

Jumbo Frames

9KB

Filtering/Forwarding Rates

1000Mbps port - 1488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps

Power over Ethernet

Standard

IEEE 802.3af, IEEE 802.3at

Power Output

Up to 30W per port
Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

70W

Environment

Temperature

Operating: 0 ~ 40 °C
Storage: -40 ~ 70 °C

Humidity (Non-condensing)
Operating: 10 ~ 90%

Storage: 5 ~ 90%

Standards Compliance

Standards

IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE802.3ab 1000BASE-T
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3x Full-duplex and flow control
IEEE 802.3az Energy efficient Ethernet

Certifications

FCC, CE, LVD

HARDWARE INTERFACE

SPECIFICATIONS

GS-1008PH V2 8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch

GS-1008PH V2

Edimax Technology Co., Ltd

No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Email: [e-mail]

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental

factors. Product specifications and design are subject to change without notice.

Copyright © 2017 Edimax Technology Co. Ltd. All rights reserved.

Edimax Technology Europe B.V.

Fijenhof 2, 5652 AE Eindhoven,
The Netherlands
Email: [e-mail]

Edimax Computer Company

3350 Scott Blvd., Bldg.15 Santa Clara,
CA 95054, USA
Email : [e-mail]

www.edimax.com