EDIMAX EW-7833AXP User manual [ml]

EW-7833AXP
Schnellinstallationsanleitung
12-2019 / v1.0
Inhalt
I. Produktinformationen ............................... 1
I-1. Verpackungsinhalt ............................................................................ 2
I-2. Systemanforderungen ...................................................................... 2
I-3. Hardwareübersicht ........................................................................... 3
II. Hardwareinstallation ................................. 4
III. Treiberinstallation ...................................... 7
III-1.Treiberinstallation ................................................................................ 7
III-2.Deinstallation des Treibers ................................................................... 8
I. Produktinformationen
Der Edimax EW-7833AXP mit MU-MIMO-Technologie und Bluetooth 5.0
bietet Hochgeschwindigkeits-Wi-Fi für Heim- und Büroanwendungen, Spiele,
HD-Streaming und andere bandbreitenintensive Anwendungen gleichzeitig.
Darüber hinaus ermöglicht der EW-7833AXP mit der externen, abnehmbaren
Dualband-Antenne dem Benutzer stabile Verbindungen und eine bessere
Abdeckung.
Alle unterstützenden Dokumente finden Sie über den folgenden Link oder den QR-Code:
https://www.edimax.com/download
(Geben Sie nach Ihrem Besuch der offiziellen Edimax-Website die Modellnummer „EW-7833AXP“ in das Suchfeld ein, um nach diesem Produkt zu suchen.)
1
I-1. Verpackungsinhalt
EW-7833AXP Schn
Flache Halterung
Set mit externer Antenne
(mit Antennenfuß)
USB Bluetooth Header
Anschlusskabel (9-polig zu 4-polig)
I-2. Systemanforderungen
- Win10
- Linux
2
I-3. Hardwareübersicht
Nr.
Beschreibung
1
Wi-Fi-Antennenanschluss
2
Halterung
3
Bluetooth Port
4
PCI-E (X1/X4)
1 2 3
4
3
II. Hardwareinstallation
Befolgen Sie bitte die Anweisungen unten, um den Netzwerkadapter in Ihren PC einzubauen.
1. Schalten Sie den PC aus und ziehen Sie den Netzstecker.
2. Lösen Sie die Schrauben der Seitenwand des Computers, nehmen Sie die
Seitenwand ab und suchen Sie nach einem freien PCI-E-Steckplatz.
3. Setzen Sie die Karte ein, indem Sie sie fest in den
Erweiterungssteckplatz drücken.
4
4. Zum Aktivieren der Bluetooth-Funktion verbinden Sie den Netzwerkadapter über das Anschlusskabel des USB Bluetooth Headers mit dem Motherboard.
5. Schließen Sie den externen magnetischen Antennenfuß an.
5
6. Befestigen Sie die Seitenwand wieder und stecken Sie das Stromkabel
wieder ein.
6
III. Treiberinstallation
Befolgen Sie bitte die Anweisungen unten, um den Treiber zu installieren bzw. zu deinstallieren.
III-1. Treiberinstallation
Den Wi-Fi- & Bluetooth-Treiber finden Sie auf der Edimax-Website oder über den QR-Code:
https://www.edimax.com/download
(Geben Sie nach Ihrem Besuch der offiziellen Edimax-Website die Modellnummer „EW-7833AXP“ in das Suchfeld ein, um nach diesem Produkt zu suchen.)
Klicken Sie auf die Download-Schaltfläche, um die Download-Seite zu
besuchen:
7
III-2. Deinstallation des Treibers
Für Windows 10:
1. Ö ffnen Sie Systemsteuerung über das Startmenü oder die Suchfunktion.
2. Wählen Sie die Option Programm deinstallieren aus der Kategorie
„Programme“.
8
3. Wählen Sie Edimax (oder ähnlich) und klicken Sie auf „Deinstallieren“.
9
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
I.
10
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
This device is restricted to indoor use.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
11
Canada, Innovation, Science and Economic Development Canada (ISED) Notices
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Avis du Canada, Innovation, Sciences et Développement économique Canada (ISED)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Devraient également être informés les utilisateurs que les radars à haute puissance sont désignés comme utilisateurs principaux (c.-à-utilisateurs prioritaires) des bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient provoquer des interférences et / ou endommager les appareils LE-LAN.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Le dispositif de fonctionnement dans la bande 5150-5250 MHz est uniquement pour une utilisation à l'intérieur de l'intérieur afin de réduire le potentiel d'interférences nuisibles aux systèmes de satellites mobiles co-canaux.
12
RED Compliance Statement
Frequency range (MHz)
Max. Transmit Power (dBm)
2402-2480 (BT+BLE)
14.11
2412-2472 (Wi-Fi)
19.88
5180-5320
20.78
5500-5700
21.76
Compliance with 2014/53/EU Radio Equipment Directive (RED)
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:
A simplified DoC shall be provided as follows: Article 10(9) Hereby, Edimax Technology Co., Ltd. declares that the radio equipment type AX3000 Dual band PCI-E
Network Adapter is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: http://www.edimax.com/edimax/global/
This device meets the EU RED requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62311 SAR is measured with this device at a separation of 20cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 20cm away from your body to ensure exposure levels remain at or below the as-tested levels.
For class 2 device (supporting WLAN 5GHz: 5150-5350 MHz) The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not Intended for Use
None
13
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU, 2014/35/EU.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 2014/53/EU, 2014/35/EU.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2014/53/EU, 2014/35/EU.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 2014/53/EU, 2014/35/EU.
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2014/53/UE, 2014/35/UE.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2014/53/EU, 2014/35/EU.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2014/53/EU, 2014/35/EU).
Türkçe: Bu cihaz 2014/53/EU, 2014/35/EU direktifleri zorunlu istekler ve diğer hükümlerle ile
uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2014/53/EU, 2014/35/EU. Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
2014/53/EU, 2014/35/EU.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/53/EU, 2014/35/EU. Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/53/EU,
2014/35/EU.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 2014/53/EU, 2014/35/UE.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2014/53/EU, 2014/35/EU.
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/53/EU, 2014/35/EU. Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2014/53/EU, 2014/35/EU.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2014/53/EU, 2014/35/EU.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2014/53/EU, 2014/35/EU.
suomen kieli: Tämä laite täyttää direktiivien 2014/53/EU, 2014/35/EU. oleelliset vaatimukset ja muut
asiaankuuluvat määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal.
14
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives.
Equipment:
AX3000 Dual band PCI-E Network Adapter
Model No.:
EW-7833AXP
The following European standards for essential requirements have been followed:
Directives 2014/53/EU
Spectrum
:
EN 300 328 V2.1.1 (2016-11)
EN 301 893 V2.1.1 (2017-05)
EN 300 400 V2.1.1 (2017-03)
EMC
:
EN 55032:2015+AC:2016
EN 55035:2017 EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EMF
:
EN 62311:2008
Safety(LVD)
:
LVD-EN 62368-1:2014+A11:2017
Date of Signature:
Dec., 2019
Signature: Printed Name:
Albert Chang
Title:
Director Edimax Technology Co., Ltd.
Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The Netherlands
a company of : Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan
Signature:
Printed Name:
David Huang
Title:
Director
15
Loading...