Edimax ES-5808P Service Manual

ES-5808P

8 Ports Desktop Power over Ethernet

Web Smart Fast Ethernet Switch

The ES-5808P is 8-port desktop PoE Web smart Fast Ethernet switch that is designed for small or medium network
environment to strengthen then network connection. This compact size design makes the ES-5808P ideal for users
with limited space.

Complies IEEE 802.3af Power over Ethernet (PoE) ports

The ES-5808P features 8 IEEE 802.3af Power over Ethernet (PoE) ports which supply the electricity up to 15.4 watts
per port. It can convert standard 90~260V/AC power into low-voltage DC that runs over existing LAN cable to supply
the power for IEEE 802.3af compliant network accessories. The ES-5808P also features PoE detection to verify
whether the connected device is IEEE 802.3af compliant or not. If it is not a PoE device (PE), only the data will be
sent through LAN cable. The ES-5808P can connect with different PoE products such as Access Points, IP cameras

or IP phones…It is the best solution where the power outlets are difficult to install or the power outlets are far to the

device.

No Special Networking Cable Required

Just use the standard Cat-5 Ethernet cable to link between the ES-5808P and the powered devices (PE). This
Ethernet cable can transmit both data and power. No power wire is needed for the powered devices (PE). It reduces
the installation time and cost.

Supports Smart Features

The ES-5808P Web smart features can be managed through a Web Browser. The smart features include simple
QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5808P also supports
bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate
traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best
of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager’s
mobility.

Supports Auto-MDI/MDI-X

Every port of the ES-5808P can automatically detect the type of cable. There is no need to choose crossover or
parallel cables when you are connecting this switch to another switch or to a computer.

Supports Auto-Negotiation

Every port of the ES-5808P can automatically distinguish the connected network devices are running at 10Mbps,
100Mbps and Half/Full-Duplex mode. The ES-5808PE can adjust the speed and mode accordingly.

Supports Non-Blocking wire speed

The ES-5808P receives and forwards traffic seamlessly with its non-blocking wire-speed. Every port of the ES­5808P has the speed up to 200Mbps in full-duplex mode simultaneously . This feature provides full wire speed to the
connected devices and allows you to run a high speed network smoothly.

Supports Store and Forward Architecture

With the store and forward architecture, the ES-5808P can maximize network performance while minimizing the
propagation of bad network packets.

Standards

IEEE 802.3af Power over Ethernet
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x Flow Control

IEEE 802.1p Class of Service, Priority Protocols

Features

Number of Ports: 8 PSE/Power over Ethernet Ports
MAC Address: 4K
Buffer Memory: 156KB
Transmission Method: Store and Forward

Smart Features

Web-based management with password access

Port Base VLAN
QoS
Port Settings
PoE Port On /Off Settings

Filtering/Forwarding
Rates

100Mbps port - 148,800pps
10Mbps port - 14,880pps

Transmission Media

10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP

Led Indicators

Per Port: Link/Act, PoE Act/Status
Per Unit: Power

Power Input

100~240V/AC, 50~60Hz

Power Output

48V/DC Per Port Output – 15.4 W Max Per Port

8 Ports at Full 15.4 W Output Supported

Power Consumption

130 Watts (Max)

Dimensions

266 × 160 × 42(L x W x H)

Weight

1.4 kg

Operating Temperature

0 to 60℃

Storage Temperature

-20 to 90℃

Humidity

10 to 90% RH (non-condensing)

Certifications

FCC Class A, CE

Specification