Page 1
24 10/100T
X
GBIC C
o
Description:
The EW-5226RS is a multi-port Switch that can be used to
This switch is a store-and-forward device that offers low la
t
workgroup, department or backbone computing environm
e
The EW-5226RS has 24 auto-sensing 10/100Base-TX RJ-
connection speed. This switch features a store
-
and-forward
and store source address in a 4K-entry MAC address tabl
e
This section provides you a few samples of network topolo
5226RS is designed as a segment switch which with its la
r
it is ideal for interconnecting networking segments.
PC, workstations, and servers can communicate each oth
e
automatically learns nodes address, which are subsequen
t
destination address.
By using Uplink port, the switch can connect with another
s
workgroups to form a larger switched network. Meanwhile,
distance between two switches by connecting with fiber ca
b
(single-mode fiber).
ES-5226RS has configure QoS policy priority mode and C
o
Service) refers to mechanisms in the network software tha
t
priority. CoS refers to feature sets, or groups of services, t
h
feature set includes priority transmission, then CoS winds
u
and switches in the network. In an enterprise network, clas
lower-priority traffic. Tags may be added to the packets to
i
as do quality of service (QoS) functions, which are implem
e
Key feature:
• Conforms to IEEE802.3 10Base-T, IEEE802.3u 100Base
IEEE802.3x Flow control and Back pressure, IEEE 802.3
a
• 24 10/100 TX plus 2 10/100/1000/Mini-GBIC Combo
• Automatic MDI/MDIX supported
• High Switch Fabric up to 8.8Gbps
• N-way Auto-Negotiation supported
• Store-and-Forwarding Switching Architecture
• 4K-entry MAC address table
• Non-Blocking full wire speed architecture
• IEEE 802.3x Flow control:
• Pause-frame for full duplex mode
• Back-pressure for half duplex mode
• Fan free design
ES-5226RS
+ 2 10/100/1000T /Mini-
mbo Web Smart Switch
build high-performance switched workgroup networks.
ency for high-speed networking. The switch is targeted at
nt.
45 ports and 2 auto-detect Gigabit combo ports for higher
switching scheme. This allows the switch to auto
-
learn
.
gy in which the switch is used. In general, the EWge address table (4k MAC address) and high performance,
r by directly connecting with EW-5226RS. The switch
y used to
filt
er and forward all tra
ffic b
ased on the
witch or hub to interconnect other small-switched
the user can also use fiber ports to connect switches. The
le can be up to 550 m (multi-mode fiber) or 10 kilometer
S (Class of Service) configuration. QoS(Quality of
make the actual determination of which packets have
at are assigned to users based on company policy. If a
p being implemented in QoS functions within the routers
s of service (CoS) differentiates high-priority traffic from
dentify such classes, but they do not guarantee delivery
nted in the network devices.
-TX, IEEE802.3ab 1000Base-T,IEEE802.3z Gigabit fiber,
d Port Trunk, IEEE 802.1p Class of Service.
Page 2
Specification
Standard IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3z Gigabit fiber
IEEE802.3x Flow control and
IEEE802.3ad Port Trunk
IEEE802.1p Class of service
Connector 10/100TX: 24 x RJ-45 with A
u
10/100/1000T/ Mini-GBIC Co
SFP sockets
Transfer Rate 14,880pps for Ethernet port
148,800pps for Fast Etherne
t
1,488,000pps for Gigabit Eth
e
Switch architecture Store and forward architectu
r
Back-plane 8.8Gbps with full wire speed.
MAC address 4K MAC with Auto learning
Flash ROM 512Kbytes
LED Per unit: System power (Gre
e
10/100TX Port: Activity/ Dupl
e
10/100/1000T/ Mini
-
GBIC C
o
Power Supply 100~240VAC 50/60Hz
Power Consumption 15.4watts (imum)
Operation Temp. 0℃ to 45℃ (32℉ to 113℉)
Operation Humidity 10% to 90% (Non-condensin
g
Storage Temp. -40℃ to 70℃
Dimension 440mm(W) x 120mm(D) x 4
4
Installation 19 “EIA /TIA Rack design,
EMI FCC Class A, CE
Safety UL, cUL, CE/EN60950-1
Software Feature
Management Web management
Port configuration Link speed, k mode, Port dis
a
negotiation
Port Trunk
Trunk groups up to 3
.
M
aximu
LACP Support LACP
VLAN Port Based VLAN, 802.1Q T
a
VLAN entry up to 32.
QOS 1) Port based priority. 2) 802.
Class of Service System provides 2 queues fo
Support priority weighted rati
o
Low priority packet), 8:1(8 Hig
Bandwidth control Each port’s bandwidth is con
f
Rate limit from32Kbps to 256
DHCP
Provide DHCP Client functio
n
Broadcast Storm filter Disable or Enable.
Port Mirror Global System support 3 mir
r
entries up to 26.
MAC Add
ress
Filteri
ng
All
ow a network administrato
r
the MAC address..
Firmware Upgrade Support Web firmware updat
e
Back pressure
to MDI/MDI-X function
mbo: 2 x RJ-45 with Auto MDI/MDI-X function + 2 x 1000
port
rnet port
e.
n)
x (Green), Speed (Amber)
mbo: Activity/ Duplex (Green), Speed (Green
)
)
mm(H)
ble/Enable, Port Flow control disable/Enable, Port Auto
trunk port members up to
4
.
g VLAN
1p priority tag
r High and Low priority.
n (H /L): 1:0(always high priority), 4:1(4 High priority then 1
priority then 1 Low priority packet)
igurable on both ingress and egress traffic independently.
Kbps
s
oring type RX, TX and both packet. The maximum of mirror
permit and deny network access to hosts associated w
ith
, backup and restore.
Page 3
Application Diagram
Small G
roup
Segment Uplink
Loading...