EDIMAX ES-5208P, ES-5216P, ES-5224P Quick Installation Guide

ES-5208P / ES-5216P / ES-5224P

Quick Installation Guide

10-2015 / v1.0

Product Information

QIG

CD

Power Cord

Rack-Mount Kit

PoE Switch (ES-5208P /

ES-5216P / ES-5224P)

 Package Contents

 Hardware Overview

2

Rack-mount Installation

 LED Status

Power: Green LED

- Off: power off or fail

- On: power on

10/100Mbps port LED: 2 LEDs per port, on RJ45 jack
Link/Activity: Amber LED

- Off: port disconnected or link fail

- On: port connected

- Blinking: sending or receiving data

PoE status: Green LED

- Off: PoE power off

- On: PoE power on

10/100/1000Mbps copper port: 2 LEDs, on RJ45 jack

- Off: port disconnected or link fail

- Green on: 1000Mbps connected

- Amber on: 10/100Mbps connected

- Blinking : sending or receiving data

-

SFP: Green LED

- Off: port disconnected or link fail

- on: 1000FX connected

- Blinking : sending or receiving data

 Operating Environment

This switch must be installed and operated within the limits of the specified
operating temperature 0 - 40°C (32 - 104°F) and humidity (10 - 90%
non-condensing).

- Do not place objects on top of the unit.

- Do not obstruct any vents at the sides of the unit.

- Do not position the unit close to any heating source such as a heater,

radiator or in direct exposure to sun.

- Take care to ensure the unit does not come into contact with water.

Consider using a dehumidifier to reduce humidity and prevent moisture
entering the unit.

3