Edimax ES-5208P Service Manual

ES-5208P

8-Port Fast Ethernet PoE+ with 2 Gigabit Combo Ports

Web-Smart Switch

The Edimax ES-5208P is a web-smart switch with 8 Fast Ethernet PoE+ ports and 2 Gigabit Combo ports. It easily connects and supplies power to PoE-enabled devices such as wireless access points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers, printers and network attached storage (NAS). ES-5208P is designed with easy management, all configuration can be performed through an intuitive browser-based Graphical User Interface. Ideal for small or medium network environments to strengthen the network connection, its standard 13-inch rack-mount brackets allow for integration with the most widely used mounting systems on the market.

IEEE 802.3at Power over Ethernet (PoE+) Auto Detection

The ES-5208P features 8 IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-5208P features PoE+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a PoE or PE device. Various PoE products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices.

Cost-Effective, No Special Networking Cable Required

Reduce your installation time and cost by using a standard Cat-5e Ethernet cable to link between the ES-5208P

switch and powered devices (PD). The Ethernet cable will then transmit both data and power, so you won't need

all those extra power cables to your powered devices (PD).

Smart Features Supported

The ES-5208P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5208P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager‘s mobility.

Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.

www.edimax.com

8-Port Fast Ethernet PoE+ with 2 Gigabit Combo Ports

Web-Smart Switch

ES-5208P

High Performance

The ES-5208P switch also supports auto-negotiation and non-blocking wire speed to give you the maximum

speed and highest performance possible for each device connected to your network.

•Auto-Negotiation

Each of the ES-5208P’s ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation.

•Non-Blocking Wire Speed

Forwards and receives traffic seamlessly – each port supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly.

Power Saving

Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers environmental efficiency . To comply with the IEEE802.3az standard, the ES-5208P provides power saving functionality to reduce energy consumption and save costs:

•Inactive Link Detection When a network device is shut down and/or an inactive link is detected, the power usage adjustment feature

automatically reduces power usage. The switch’s power consumption will be dynamically adjusted according to

the link status and the number of active network devices.

•Cable Length Detection Devices equipped with this feature automatically detect the length of connected Ethernet cables and adjust power usage accordingly. The shorter the cable length, the less power it consumes.

FEATURES

•Eight 10/100Mbps Fast Ethernet PoE+ ports and two 10/100/1000Mbps combo ports.

•IEEE 802.3af/at PoE compliant for simplified deployment and installation.

•Up to 30W per port (total power budget: 160W) for powering PoE-enabled devices.

•Auto-detection of power devices(PD) and power consumption levels.

•IEEE 802.1Q VLAN allows network segmentation to enhance performance and security

•Switch capacity: 2.8Gbps

•IGMP Snooping V1 / V2 supported

•4K MAC address table supported

•13-inch rack-mountable metal case

APPLICATION DIAGRAM

Internet

xDSL Modem/Router

Network Camera

SOHO

PoE Splitter

PoE

Network Camera

PoE

Network Camera

ES-5208P PoE+ Web-Smart Switch

Uplink

Power Outlet

Data Power + Data (PoE)

PoE

Access Point

Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.

PoE

IP Phone

Storage & Control

Power Phone Line (RJ-11)

www.edimax.com

+ 2 hidden pages