Page 1
EN-9320SFP+
EN-9320TX-E
Quick Installation Guide
08-2017 / v1.0
Page 2
I. Product Information .............................................................................. 1
I-1. Package Contents .................................................................................................................... 1
I-2. LED Status ................................................................................................................................ 1
I-3. System Requirements .............................................................................................................. 1
II. Hardware Installation ............................................................................ 2
III. Setup Wizard......................................................................................... 3
III-1. Driver Installation .................................................................................................................... 3
III-2. Driver Uninstallation ................................................................................................................ 8
Page 3
Multi-Language Quick Installation Guide (QIG) on the CD
Čeština: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači
Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD
Español: Incluido en el CD el G.R.I. en Español.
Français: Veuillez trouver l’français G.I.R ci-joint dans le CD
Italiano: Incluso nel CD il Q.I.G. in Italiano.
Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n
Nederlands: De nederlandse Q.I.G. treft u aan op de bijgesloten CD
Polski: Skrócona instrukcja instalacji w języku polskim znajduje się na załączonej płycie
CD
Português: Incluído no CD o G.I.R. em Portugues
Русский: Найдите Q.I.G. на pусскoм языке на приложеном CD
Türkçe: Ü rün ile beraber gelen CD içinde Türkçe Hızlı Kurulum Kılavuzu'nu bulabilirsiniz
Українська: Для швидкого налаштування Вашого пристрою, будь ласка, ознайомтесь
з інструкцією на CD
Page 4
I. Product Information
LED
Status
Definition
SPEED
Green
10Gbps
Amber
5Gbps / 2.5Gbps / 1Gbps
Off
100Mbps
LNK/ACT
Solid Green
Link established
Flashing Green
Activity or data transmitting
Off
No Link
QIG
CD-ROM
Low Profile PCIe Bracket
Or
EN-9320SFP+
EN-9320TX-E
The EN-9320SFP+/EN-9320TX-E is a high-performance 10 Gigabit Ethernet PCI
Express Adapter for Servers.
I-1. Package Contents
I-2. LED Status
I-3. System Requirements
- Windows 7/8/8.1/10, windows Server 2012, 2012 R2, 2008, 2008 R2
- Hard Disk: 100MB
- CD-ROM Drive
- Empty PCI Express 2.0 Slot (x4 or higher)
- 10 Gigabit SFP+ transceiver (not compatible with 10/100/1000 Mbps SFP
transceivers)
1
Page 5
II. Hardware Installation
1. Switch off and unplug your computer and remove the cover.
Refer to your computer’s user manual if you are unsure how to
remove the cover and locate a PCIe slot.
2. Identify your empty PCIe slot and remove the associated metal bay cover
on the back of the computer by unscrewing it. Insert the Ethernet card
into the empty PCIe slot.
A Low Profile PCIe bracket is also included in the package
contents.
2
Page 6
3. Secure the card in place by screwing the metal bay screw, which you
removed in the previous step, back into place. Reattach the cover on your
computer.
III. Setup Wizard
III-1. Driver Installation
1. Switch your computer on and if a Windows “Found New Hardware” wizard
opens, please close it.
3
Page 7
2. Insert the included CD-ROM into the CD drive of your computer.
The setup wizard is also available for download from the Edimax
website.
3. The setup wizard will open as shown below. Click on your wireless PCIe
adapter to continue.
If the CD doesn’t auto-run or if you downloaded the setup wizard,
please browse to the “Autorun” folder of the CD.
4. Click “Install Driver” to continue to install the drivers for your EN-
9320SFP+/EN-9320TX-E.
4
Page 8
5. Please wait while the setup wizard prepares to install the drivers.
6. Click “Next” to install the driver.
7. Select a folder where setup will install files. Click “Next” to confirm.
5
Page 9
8. Click “Install” to begin the installation.
9. Please wait while the driver is installing.
6
Page 10
10. When the installation is complete, click “Finish” to exit.
11. Click “Exit” to close the setup wizard.
The multi-language QIG is also included on the CD-ROM. To open
it click “Multi-language QIG”.
7
Page 11
III-2. Driver Uninstallation
III-2-1. Windows Vista, 7, 8.1 & 10
1. Open Control Panel using the Start menu or
Search function.
2. Select Uninstall a program under the
Programs category.
3. Select Edimax (or similar) and click Uninstall.
8
Page 12
COPYRIGHT
Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written
permission from Edimax Technology Co., Ltd.
Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any warranties,
merchantability, or fitness for any particular purpose. Any software described in this
manual is sold or licensed as is. Should the programs prove defective following their
purchase, the buyer (and not this company, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages
resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right
to revise this publication and to make changes from time to time in the contents hereof
without the obligation to notify any person of such revision or changes.
The product you have purchased and the setup screen may appear slightly different from
those shown in this QIG. The software and specifications are subject to change without
notice. Please visit our website www.edimax.com for updates. All brand and product
names mentioned in this manual are trademarks and/or registered trademarks of their
respective holders.
9
Page 13
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
10
Page 14
EU Declaration of Conformity
English: This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 2014/30/EU.
Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la
directive 2014/30/EU.
Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními
směrnic 2014/30/EU.
Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami
określonymi Dyrektywą UE 2014/30/EU.
Română: Acest echipament este în conformitate cu cerinţele esenţiale şi alte prevederi relevante ale
Directivei 2014/30/EU.
Русский: Это оборудование соответствует основным требованиям и положениям Директивы
2014/30/EU.
Magyar: Ez a berendezés megfelel az alapvető követelményeknek és más vonatkozó irányelveknek
(2014/30/EU).
Türkçe: Bu cihaz 2014/30/EU. direktifleri zorunlu istekler ve diğer hükümlerle ile uyumludur.
Українська: Обладнання відповідає вимогам і умовам директиви 2014/30/EU.
Slovenčina: Toto zariadenie spĺňa základné požiadavky a ďalšie príslušné ustanovenia smerníc
2014/30/EU.
Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/30/EU.
Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/30/EU.
Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili
della Direttiva 2014/30/EU.
Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen
van richtlijn 2014/30/EU.
Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/30/EU.
Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv
2014/30/EU.
Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta
bestämmelser i direktiv 2014/30/EU.
Dansk: Dette udstyr er i overensstemmelse med de væ sentligste krav og andre relevante
forordninger i direktiv 2014/30/EU.
suomen kieli: Tämä laite täyttää direktiivien 2014/30/EU. oleelliset vaatimukset ja muut asiaankuuluvat
määräykset.
-----------------------------------------------------------------------------------------------------------------------
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not be treated as household or general waste. It
should be handed over to the applicable collection point for the recycling of electrical and electronic
equipment, or returned to the supplier for disposal.
11
Page 15
Declaration of Conformity
We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the
equipment described below complies with the requirements of the European R&TTE
directives.
Equipment:
10GbE SFP+ / 10GbE Network Adapter Card
Model No.:
EN-9320SFP+ / EN-9320TX-E
The following European standards for essential requirements have been followed:
Directives 2014/30/EU
EN 55032:2012/AC:2013 Class B
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 55024:2010
EN 61000-4-2:2009 (ESD)
EN 61000-4-3:2006/A1:2008/A2:2010 (RS)
EN 61000-4-4:2012 (EFT)
EN 61000-4-5:2014 (Surge)
EN 61000-4-6:2014 (CS)
EN 61000-4-8:2010 (PFMF)
EN 61000-4-11:2004 (DIP)
Date of Signature:
April, 2017
Signature:
Printed Name:
Albert Chang
Title:
Director
Edimax Technology Co., Ltd.
Edimax Technology Europe B.V.
Fijenhof 2,
5652 AE Eindhoven,
The Netherlands
a company of :
Edimax Technology Co., Ltd.
No. 278, Xinhu 1st Rd., Neihu
Dist., Taipei City, Taiwan
Signature:
Printed Name:
Vivian Ma
Title:
Director
Edimax Technology Europe B.V.
12
Page 16
13
Loading...