Edimax EN-9235TX-32 V2 Service Manual

This product photo for reference only!!
Gigabit Ethernet PCI Adapter
www.edimax.com
EN-9235TX-32
Description
Edimax Gigabit PCI adapters deliver high performance wired network connectivity to your desktop PCs. Connect your Gigabit home or business network to any of our Gigabit PCI adapters and you can instantly transfer files at speeds 10 times faster than 10/100 Fast Ethernet devices. Once connected, accessing shared music, documents, movies, and photos on your network is easy and quick.
Comprehensive Networking Approach
The EN-9235TX-32 supports ACPI (Advanced Configuration Power Interface) and Wake on LAN that allows remote power control of the PC. The manageability, compatibility, Plug&Play and 32-bit bus-mastering architecture are the key aspects of our PCI Gigabit adapters that provide true value for your network.
Ease of Installation & Configuration
The EN-9235TX-32 offers ease of installation and flexibility of configuration through Plug & Play technology. Simply place the adapter into the PCI slot in your PC and then turn on the PC; plug-n-play will automatically detect the new device. The adapter is fully compatible with Ethernet, Fast Ethernet, and Gigabit Ethernet networks and
the adapter’s 10/100/1000 Mbps auto negotiation ports eliminate any need for manual switching. Best of all, the
adapter is supported by all major operating systems including Vista and Linux OS.
User-friendly Setup CD Wizard and Driver*
To facilitate network connectivity, the EN-9235TX-32 includes a user-friendly setup CD wizard. Its user interface simplifies driver installation for immediate use of the device.
* The Setup CD Wizard is only compatible with Edimax network interface cards.
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
www.edimax.com
Gigabit Ethernet PCI Adapter
FEATURES AND TECHNICAL SPECIFICATIONS
Supports 32-bit 33/66MHz PCI Local Bus Master high-speed operation (Rev. 2.1/2.2/2.3)
Complies with IEEE 802.3, 802.3u, 802.3ab and 802.3x standards
Supports 10/100Mbps full and half duplex, 1000Mbps full duplex
Supports 10/100/1000Mbps Auto Negotiation and jumbo frame
Supports IEEE 802.3x Full Duplex flow control
Supports IEEE 802.1Q VLAN Tagging
Supports PCI 2.2 Wake On LAN function
Supports PCI Message Signalled Interrupt (MSI)
Built-in FIFO buffers reduce overhead of memory transfers
Includes a Setup Wizard program
Includes a low-profile bracket
Plug-and-Play
Supports drivers for Novell 5.X/6.X, Windows 98/ME/NT4.0/2000/XP/Vista/7/8, Linux 2.4.x
HARDWARE INTERFACE COMPLIED STANDARDS LED Indicators
PCI Interface One 10/100/1000 Mbps LAN port
INSTALLATION KIT CHIPSET HUMIDITY
Setup Wizard program with Driver
setup
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,
IEEE802.3x
Realtek RTL8169SC Single Chip Operating: 10 to 90% RH (Non-
Link/Act
condensing)
Storage: 5 to 95% RH (Non-
condensing)
EN-9235TX-32
SYSTEM REQUIREMENTS BUS ARCHITECTURE TEMPERATURE
CPU: Pentium III 1G above or similar Memory size: 256MB RAM One CD-ROM drive Hard Disk: Min. of 100MB disk space One available PCI slot OS:Novell 5.X/6.X, Windows
98/ME/NT4.0/2000/XP/Vista/7/8,
Linux 2.4.x
DIMENSIONS Weight CERTIFICATIONS
114 x 52 x 16 mm 98g CE, FCC
TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS
PCI V 2.3/2.2/2.1, 32-bit, 66/33MHz
Operating: 0 to 40 Storage: -40 to 70
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates and coverage may vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Loading...