EDIMAX EDI GS-3008P Instructions

GS-3008P

Quick Installation Guide

11-2017 / v1.0

I. Product Information

1 2 3

4 5 6

I-1. Package Contents

1.

GS-3008P Switch

2. Quick Installation Guide

3.

CD

I-2. LED indicators:

Color

PWR/SYS Green Off Power off or fail

PoE Alert Green On PoE power output over 90% PoE power

Link/ACT Green/Amber Green On/Blinking 1000Mbps connected/data transmitting

4.

Power Cord

5. Power Adapter

6.

Rubber Feet

Status Description

On Power on

Blinking System boot-up

Off PoE power output under 90% PoE power

Amber On/Blinking 10/100Mbps connected/data transmitting

Off Disconnected or fail

SFP Green Green On/Blinking 1000FX connected/data transmitting

Off Disconnected or fail

PoE Green On PoE power output on

Off PoE power output off

2

I-3. Login

To login to the web management interface and configure the switch’s settings,
connect a computer to the switch using an Ethernet cable. Open a web
browser and go to the switch’s IP address. The default IP address is

192.168.2.1. Your computer’s IP address must be in the same subnet as the
switch. For the default IP address this is any IP address in the range

192.168.2.x (x = 2 – 254). You can modify the IP address of your computer if
you need.

Default IP address 192.168.2.1
Default user name admin
Default password 1234

1. Enter the switch’s IP address (192.168.2.1) in the URL bar of a web

browser. IE 7 or above is recommended.

2. At the following screen login with the default username “admin” and

password “1234”.

3