Edimax 3Mpx PoE, 3Mpx Quick Installation Manual
3Mpx PoE True Day & Night WDR
Vandal Dome Network Camera
Quick Installation Guide
Thank you for purchasing this product.
Before you use the product, please check the package
contents. If any item is missing, contact your dealer of
purchase to claim the missing item(s).
Package Contents:
No.
Description
Quantity
1
Network IP camera
1
2
PU foam pad
1
3
CDROM with user manual, QIG and EdiView 32
1
4
QIG
1
5
Tools package
1
6
Terminal block (2 pins x 1 & 5 pins x 2)
1
1
Installation of the Network IP Camera
Please follow the instructions below to setup your new IP
camera.
1. Attach the front cover using the tool and screws included in
the tools package.
2. Attach the PU foam pad onto the bottom of the rear cover.
3. Create your GPIO and power cable with the terminal blocks.
4. Please refer to the chart below for definitions of the
terminal blocks. The chart is also printed on the
2
motherboard.
Terminal block definition:
GPIO
J17: 5 pins
J18: 5 pins
Power
J15: 2 pins
Pin No.
Function
Function
Pin No.
Function
Pin 1
AGND
GND
Pin 1
DC 12V
Pin 2
Audio Out
Alarm In 1
Pin 2
GND
Pin 3
Ext MIC In
Alarm In 2
Pin 4
RS485 D+
Alarm Out
RS485 D-
GND
Loading...