
1
EDIC-mini Tiny model B32
150h/300h/600h/1200h/2400h
Specications
- Plastic case;
- Dimensions: 43x23x5.3 mm;
- Weight: <10g (without a battery);
- Operating temperature range: 0…+40˚C
(32…+104˚F);
- Recording mode – mono;
- Built-in microphone’s operating distance:
7…9 m (21-27ft);
- Recording duration: up to 2400 hours;
- Battery life in record mode (sampling
rate 8KHz, without compression): 90 hours;
- Battery life in record mode with VAS (audio
signals below threshold): up to 190 hours;
- Battery life in stand-by mode:
up to 8.5 months;
- Power supply: CR2032 battery (d=20mm,
h=3.2mm);

3
Inserting battery
Attention! Insert the battery as it is shown on the
gure 2 (“plus” to the front side of the recorder).
Otherwise, the recorder could be harmed.
To insert/ take out the battery, twist the recorder lid
and open/close it.
Figure 2

4
Turning the Recorder on
After you inserted the battery, press the button.
Keep it pressed for 2-3 seconds and then release.
The recorder will start self testing. While self testing,
the recorder LED will ash three times and after
a pause the fourth time (if fourth duration will not
occur, the battery is uncharged or malfunctioning).
The duration of the fourth ash can last for some
seconds depending on the recorder‘s memory
capacity. To evaluate the battery life in different
modes, use the table data.
Note:
- For the recorder to operate according to the
manufacturer’s standards, use batteries of
well-known brands.
- For the full usage of the battery capacity,
make recordings in modes with low current
consumption (the upper part of the table).

5
Table 1.
The table 1 shows approximate values for Edic-mini Tiny B33-150h.
Without
compression
Logarithmic ADPCM
2-bits
ADPCM
4-bits
Consumption current/recording duration (mA/hours)
5 2 mA/75hr 2 mA/75hr 2.4 mA/64hr 2.3 mA/67hr
8 2.3 mA/67hr 2.6 mA/58hr 3.1 mA/47hr 2.8 mA/53hr
11 3.0 mA/50hr 3.2 mA/47hr 3.5 mA/42hr 3.4 mA/44hr
16
3.9 mA/39hr 4.1 mA/36hr 4.7 mA/30hr 4.3 mA/33hr
22 3.8 mA/39hr 5.3 mA/28hr 5.7 mA/25hr 5.7 mA/25hr
Compression
Sampling
rate

6
Start and Stop Recording
To start/stop recording, keep the button pressed for
3-4 seconds while the LED does not signal. When
the recorder starts recording, the LED ashes ve
times. When the recorder stops recording, the LED
will ash once.
While recording, the sequences of LED ashes
show the charge of the battery (the rst sequence:
1 ash – from 5% to 100%, 2 ashes – from 1% to
5 %, and 3 ashes mean that the battery is almost
discharged (it should be changed). In 2-4 seconds,
the second sequences show the free memory
capacity: 1 ash – 75%-100%, 2 ashes –from
50% to 75%, 3 ashes – from 25% to 50%, and 4
ashes – from 0% to 25%).

7
Designed and manufactured by the
Telesystems Ltd.
The Manufactory Warranty Coupon
The manufacturer undertakes warranty repair
liabilities for 1 year from the date of purchase,
but no longer than 2 years from the date of
manufacture of the product (warranty does not
cover batteries). Paid repair is provided within
recorder’s operation lifetime (5 years). The
manufacturer reserves the right to refuse in repair
after the expiration of recorder operation life.
This warranty is voided if the recorder is:
- improperly used
- mechanically damaged
- received without supplier warranty tag on
this document
All questions regarding product exchange and
return must be solved with the seller’s company
according to Protection of Consumers Law.

Edic-mini Tiny model B32
□ EM Tiny B32 - 150 h
□ EM Tiny B32 - 300 h
□ EM Tiny B32 - 600 h
□ EM Tiny B32 - 1200 h
□ EM Tiny B32 - 2400 h
Number __________________________________
QC______________________________________
Selling date _____________________________
Seller ________________________________
Address:
TS-Market Ltd.
Building 10/1 Sosnovaya Alleya, Zelenograd, Moscow, The
Russian Federation, 124489
Tel: +7 (495) 638-8800; +7 (495) 651-91-51
(Cell) +7 (903) 530-10-01, +7 (909)638-88-00
Fax: +7 (499) 735-0491
E-mail: support@ts-market.com
http://www.ts-market.com
GPS coordinats : 55.98065 N 37.25224 E