EDIC-mini Tiny 16 B25 8960, Tiny 16 B25 1120, Tiny 16 B25 2240, Tiny 16 B25 4480, Tiny 16 B25 17920 User Manual

1

EDIC-mini TINY16
Model B25
1120/2240/4480/8960/17920/35840

Characteristics

- Metallic case;

- Dimensions: d = 32 mm, h =12mm;

- Weight: < 18g (without battery);

- Operating temperature range: 0…+40 ˚C
(32…+104 ˚F);

- Recording mode – mono;

- Recording time in recording mode (sampling
rate 8 kHz, without compression): 130
hours;

- Recording time in recording mode with VAS
(audio signals below threshold): up to 20
days;

- In stand-by mode: up to 2 years;

- Power supply: one CR2450 battery.

2

In Box:

- Recorder;

- USB cable;

- Software CD;

- Instructions;

- Two CR2450 batteries.

Battery
compartment

LED

Microphone

USB-micro
connector

Control button

Figure 1: Edic-mini Tiny16 Model B25

3

Inserting Battery

Attention! Insert the battery as it is shown in the
picture (“plus” to the front side of the recorder).
Otherwise, the recorder could be harmed.

After you inserted the battery, keep the control

button pressed for two seconds. The LED has
to ash three times (if that does not happen, the

battery is discharged or malfunctioning) showing

that the recorder is self testing. After 5-10 seconds,

the recorder’s LED signals the fourth time: it means

that the recorder is ready for work. The duration
of the fourth ash can be some dozen seconds
(depending on the recorder’s memory capacity).

To evaluate the recorder’s recording time in

different operating modes, use the table data.

Recorder

Battery

Lid of the battery
compartment

Figure 2: Inserting battery