GALAXY
PROFESSIONAL
12 GALLON CARPET EXTRACTOR
OWNER’S/OPERATOR’S MANUAL
2000CX-HR
2000FX-HR
PROUDLY DESIGNED AND MANUFACTURED BY
WWW.EDIC-USA.COM
Revised 1-25-18
TABLE OF CONTENTS
RECEIVING YOUR EQUIPMENT...................................................................................
WARNINGS AND SAFETY..............................................................................................
ELECTRICAL INFORMATION.......................................................................................
GROUNDING INSTRUCTIONS......................................................................................
MAINTENANCE................................................................................................................
CORD STORAGE AND SAFETY....................................................................................
2000CX-HR MACHINE OVERVIEW..............................................................................
2000FX-HR MACHINE OVERVIEW...............................................................................
ACCESSORY HEATER OVERVIEW...............................................................................
HOW TO USE AN ACCESSORY HEATER...................................................................
PRIMING THE MACHINE.............................................................................................
ADJUSTING PRESSURE..................................................................................................
CLEANING CARPET.........................................................................................................
CLEANING UPHOLSTERY..............................................................................................
WIRING...............................................................................................................................
UPPER BREAKDOWN 2000CX-HR.............................................................................
UPPER BREAKDOWN 2000FX-HR..............................................................................
LOWER BREAKDOWN 2000CX-HR............................................................................
LOWER BREAKDOWN 2000FX-HR.............................................................................
TROUBLESHOOTING.....................................................................................................
NOTES.................................................................................................................................
WARRANTY INFO............................................................................................................
3
3, 4
4
4
5
5
6
7
8
9
10
10
11
11
12, 13
14, 15
16, 17
18. 19
20, 21
22
23
24
2
RECEIVING YOUR NEW 2000CX-HR OR
2000FX-HR: When your package is delivered, check
the carton carefully for signs of rough handling. If your
2000CX-HR/2000FX-HR is damaged, notify the carrier
immediately and request an inspection. Be sure to keep
the carton, packing inserts, packing lists and carrier’s
receipt until the inspector has veried your claim.
EDIC’s liability ceases when the carrier picks up the shipment. However, our customer service sta will be happy
to furnish any information needed in connection with
the claim and will attempt to expedite a resolution.
PLEASE READ BEFORE OPERATING YOUR
NEW 2000CX-HR/2000FX-HR:
Read the manual carefully and completely before attempting to operate the unit. is manual has important
information for the use and safe operation of the machine. Keep this manual handy at all times.
is equipment has been engineered and manufactured
to provide excellent performance and service. To ensure
that your equipment will continue to perform as intended:
• Maintain equipment regularly- following the suggested maintenance schedule provided.
• Use only original EDIC parts when servicing.
• Operate equipment with care.
If additional information is needed, please contact:
EDIC
800-338-3342
All information and specications printed in the manual are current at the time of printing; however because
of EDIC’s policy of continual product development, we
reserve the right to make changes at any time without
notice.
FAILURE TO COMPLY WITH THE FOL-
LOWING WARNINGS AND INSTRUCTIONS
WILL VOID THE WARRANTY.
WARNING!
• e machine was designed for use on carpet cleaning
applications as per instructions and recommendations written in this manual. Any deviation from its
proper use or purpose and the consequential damage
that may occur is the sole responsibility of the end
user.
• Disconnect the power cord from the outlet before
servicing. Do not leave machine connected to an electrical outlet when unattended.
• Do not immerse or use this machine in standing water. Such use may cause electric shock.
• When using an extension cord, use only a 3-prong
conductor grounding cord-12 gauge wire or heavier.
• To avoid electric shock, do not expose the unit to rain
or snow. Store it indoors in a heated location only.
• Do not use the machine for dry vacuuming.
• Use defoamer at all times to prevent damage to the
vacuum motor.
• Do not use water in excess of 130°F (54°C) in the
solution tank
• To prevent seal damage and chemical build-up to the
pump system, run clean water through the solution
lines aer each day’s use.
• Use only commercially available carpet cleaning solutions and defoamer intended for use with machines
of this type. Do not use dyes, bleaches, ammonia, or
other additives.
• e use of powdered cleaning solution, if not diluted
properly, may result in damage to the pump. Powdered chemical is not recommended. If powdered
chemicals are used, premix in a separate container
before placing in the solution tank.
• Always read and understand your chemical’s MSDS
(Material Safety Data Sheet) before use.
• is equipment is not designed to handle or use
combustible/volatile substances such as gasoline or
kerosene, in, on, or near the machine. e use of such
materials will cause extreme hazardous condition.
• Do not expose machine to freezing temperatures.
3
• All repairs must be done by an authorized
EDIC repair station.
• Do not use replacement parts other than original
EDIC parts.
• Do not allow your spray stream to remain in one
xed location as surface damage may occur.
• Check that all spray nozzles are securely fastened.
Loose nozzles could be ejected from equipment at
high speeds.
• is is not a toy. Keep away from children.
• Do not pull by the power or use power cord as a handle. Always unplug by grabbing the plug and pulling,
do not unplug by pulling the power cord.
• Inspect cord for damage. Do not use damaged cords.
Connect only to properly grounded outlets.
• Keep hair, ngers, loose clothing, and body parts
away from moving parts and openings.
• Turn o all controls before disconnecting machine
• Use caution with ejected liquid or chemicals. High
pressures and temperatures could be hazardous to
nearby people or surroundings.
• Do not run the heater dry. always make sure you have
water
• Do not expose heater to freezing temperatures.
• Prevent burns by wearing gloves or using a barrier to
remove hot quick disconnects.
• Never leave heater or equipment unattended when
connected or powered on.
• e accessory heater was designed for use on
2000CX-HR/2000FX-HR extractors for carpet, oor
and upholstery extraction applications. Any deviation
from its proper use or purpose and the consequential
damage that may occur is the sole responsibility of
the end user.
GROUNDING INSTRUCTIONS FOR
115VOLT:
is piece of equipment must be grounded. Should an
electrical malfunction occur, grounding provides a path
of least resistance for electrical current- reducing the risk
of electric shock. is piece of equipment is furnished
with a cord that has a grounding conductor and grounding plug. e grounded plug must only be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING:
Connecting the equipment to an improperly grounded
outlet can result in an increased risk of electric shock. A
qualified electrician should be consulted if you are unsure
that the outlet is properly grounded. Do not modify the
plug provided with the equipment. If it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
is appliance is designed for use on a 120-volt circuit.
e grounding plug provided looks like the plug illustrated in Figure 1. Replace the power cord if the grounding
pin is damaged or broken.
Extension cords connected to this machine should be
12 gauge, three-wire cords with three-prong plugs and
outlets. DO NOT use extension cords more than 25 feet
(7.6 m) long.
ELECTRICAL - 115 Volt
Model: 2000CX-HR/2000FX-HR
is machine is designed to operate on a standard 15
amp, 120 volt, 60 Hz, AC circuit. Voltages below 105 volt
AC or above 125 volts AC could cause serious damage to
the motor.
Figure 1
4
MAINTENANCE:
is 2000CX-HR/2000FX-HR has been engineered and
built to require minimum maintenance. But like any
machine, it does require basic care to keep it in optimum
working condition. Careful attention to these maintenance instructions will give you maximum operating
performance and life expectancy of the machine.
Wee kl y :
• Check and clean solution lter
• Check for obstructions in vacuum pathways
• Quarterly:
• Check pump, plumbing and ttings for leaks
• Check power cords and hoses for tears
CAUTION: Disconnect the power cord from the outlet
before doing any clean up or maintenance on the machine
1. Keep the machine clean. Do not allow dust to accumulate on external surfaces or near any moving parts.
2. Aer every job, wipe down the surface of the machine
with a clean damp cloth.
3. Inspect cord for damage. Do not use machine with a
damaged cord.
PERIODIC MAINTENANCE
• Use only chemicals safe for extractors
• Adhere to the appropriate mix ratios for all chemicals
• For optimal performance, it is suggested that the
operator ush the system aer every job or at the end
of the day.
• Pump seals and valves may need to be replaced at the
1000 hour mark if a loss in pressure is noted
Daily:
CORD STORAGE:
While not in use, storage can be accomplished by winding cord around handle assy. Cord should be
completely unwound during operation.
CORD SAFETY
• Do not leave appliance when plugged in. Unplug
from outlet when not in use and before servicing
• Do not use with damaged cord or plug. If appliance is
not working as it should, has been dropped, damaged,
le outdoors, or dropped into water, return to service
center for inspection and repair.
• Do not pull or carry by cord, use cord as handle, close
a door on cord, or pull cord around sharp edges or
corners. Do not run this 2000CX-HR/2000FX-HR
over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling cord. To unplug, grasp the
plug, not the cord.
• Do not handle plug or appliance with wet hands.
• is equipment should be stored indoors and not
exposed to rain.
1. Always keep the machine clean inside and out.
2. Pour 2 gallons of clean hot water in the solution
tank. Turn the pump on and ush the entire system
through the wand nozzles for about a minute to prevent alkaline build-up.
3. Remove dirt and lint build-up inside the lter screen
in the recovery tank. Lint should be cleaned o so
that air ow is not impeded.
4. Check the solution tank strainer in the solution tank.
If lint has accumulated in the screen, remove and
rinse it in clear running water.
5
2000CX-HR
OVERVIEW
1. Handle- Used to maneuver and position the 2000CXHR/2000FX-HR. Contains switch box (for switchbox,
see #12).
2. Recovery tank and lid- Tank collects recovered waste
water. Lid allows access to recovery tank and creates a
seal to ensure suction.
3. Solution tank and lid- Tank used to store clean water
or solution for your job. Lid allows access to the
solution tank and prevents external contamination of
solution tank.
4. Non-marking front 4” locking casters and rear 10”
wheels.
5. Recovery/vacuum hose inlet barb- connect your
recovery vacuum hose to this barb.
1
3
2
6. Male twist lock pigtail- Connects to 50 power cord.
One circuit per cord.
7. Solution line Q.D.- Pressurized connection for solution line.
8. Pressure Relief/ Power Prime
9. Pressure Gauge
10. Pressure regulator
11. Cool air intake for vacuum.
12. Recovery tank dump valve
13. Heater mounting brackets.
14. Switch box- Two switches marked “VACUUM” and
one switch marked “PUMP”.
14
5
13
6
7
8
9
4
10
12
11
6
2000FX-HR
OVERVIEW
1. Handle- Used to maneuver and position the 2000CXHR/2000FX-HR. Contains switch box (for switchbox,
see #12).
2. Recovery tank and lid- Tank collects recovered waste
water. Lid allows access to recovery tank and creates a
seal to ensure suction.
3. Solution tank and lid- Tank used to store clean water
or solution for your job. Lid allows access to the
solution tank and prevents external contamination of
solution tank.
4. Non-marking front 4” locking casters and rear 10”
wheels.
5. Recovery/vacuum hose inlet barb- connect your
1
3
2
recovery vacuum hose to this barb.
6. Two male twist lock pigtails- Connect to two 50
power cord. One circuit per cord
7. Solution line Q.D.- Pressurized connection for solution line.
8. Pressure Relief/ Power Prime
9. Pressure Gauge
10. Pressure regulator
11. Cool air intake for vacuum.
12. Recovery tank dump valve
13. Heater mounting brackets.
14. Switch box- Two switches marked “VACUUM” and
one switch marked “PUMP”.
14
5
13
6
7
8
9
4
10
12
11
7
1. INLET QUICK DISCONNECT AND HOSE- Connects to machine’s outlet.
2. POWER SWITCH.
3. LAMP- Indicates when heat element is on and working.
4. TWIST LOCK PIG-TAIL- is connects to the
female twistlock plug on the rear of the 2000CXHR/2000FX-HR.
5. OUTLET QUICK DISCONNECT- Connects to
working solution line.
ACCESSORY HEATER KIT 605HR/705HR
OVERVIEW
(PURCHASED SEPARATELY)
2
6. HANDLE- Used to hold and transport the heater
7. MOUNTING FEET- Used to engage the mounting
brackets on an 2000CX-HR/2000FX-HR extractor
and secure the heater.
8. RESET ACCESS POINT- Allows access to the breaker switch in the event the unit has been run dry.
3
1
4
5
7
6
8
6
8
How to use an accessory heater:
1. Fill the solution tank of your 2000CX-HR/2000FXHR extractor with sucient water or solution for the
task at hand. Do not use water over 130 degrees F.
2. Mount the Heater by lining up the two mounting
legs (See #7 on page 8) to the two mounting brackets on the rear of the machine (#11 on pages 6&7).
3. Connect your heater’s inlet hose (#1 on page 8) to the
machine’s outlet quick disconnect (#7 on pages 6&7).
4. Connect your 25 solution hose
to the heater’s Q.D. (#5 on page 8)
5. Connect your 50FT power cord to the twist
lock pigtail on the heater (#4 on page 8). Plug
the 50 power cord(s) to the twist lock pigtail
on the back of the machine (#6 on pages 6&7)
6. Connect the power cord(s) to the machine and
an approved 15 amp outlet. If your machine is a
2000FX-HR, each of the two cords must be on a separate 15 am circuit.
7. Connect your 25 vacuum hose to the extractor’s
vacuum inlet barb (#5 on pages 6&7)
8. Connect your vacuum and solution line to a carpet
wand or upholstery attachment.
9. COMPLETE THIS STEP BEFORE TURNING
HEATER ON: Turn the pump switch to the “ON”
position using the pump switch on the handle of
your 2000CX-HR/2000FX-HR. Pressing the solution
valve trigger of your attachment, spray water for 1015 seconds until you have a steady ow. is ensures
the heater is lled with uid.
10. Turn heater on using the power switch (#2 on page
8) and allow up to 3 minutes for the unit to heat up.
11. e heater is ready for use once the green lamp (#3
on page 8) shuts o. Once you start cleaning, the
green lamp will turn on and o throughout your job
as the thermostats automatically regulate the temperature.
9
PRESSURE RELIEF/POWER PRIME VALVE:
For location, see #8 on page 6 and 7.
CLOSED
OPEN
PRIMING THE PUMP:
is machine is equipped with a PRESSURE RELIEF/
POWER PRIME VALVE. To prime the machine, turn on
the pump and turn the valve to open position (“O”) wait
a few seconds until the pump changes pitch and place it
back to the closed position. You may “POWER PRIME”
the pump by following the above steps, placing your hand
over the RECOVERY HOSE/ VACUUM INLET BARB
(#5 on pages 6&7)
ADJUSTING PRESSURE USING THE
PRESSURE REGULATOR:
Pressure gauge
Pressure regulator
is machine is equipped with a PRESSURE REGULATOR and PRESSURE GAUGE. You may adjust the
pressure between 100PSI and 500PSI. e machine
has been set to the max pressure at the factory. DO
NOT exceed 500PSI. For location, see #9 & #10 on
pages 6 & 7.
TO REDUCE PRESSURE:
1. Turn on the pump. Prime, if necessary.
2. DO NOT SPRAY WHILE ADJUSTING.
3. Turn the PRESSURE REGULATOR counter-clockwise and monitor the PRESSURE
GAUGE until you have reached the desired
Pressure.
RELIEVING PRESSURE:
In the event that you cannot connect or disconnect the
hoses, attachments or accessories to or from the solution
system, you must rst relieve the pressure. To do so, Turn
o the pump and turn the PRESSURE RELIEF/POWER PRIME VALVE to the open position (“O”) and then
connect or disconnect the attachment. Always place the
Pressure relief valve back to the closed position.
WARNING: DO NOT LEAVE THE MACHINE UNATTENDED WITH THE PRESSURE RELIEF/PRIMING
VALVE OPEN! FLOODING MAY OCCUR. CLOSE
THE VALVE DURING USE TO PREVENT PRESSURE
LOSS. DO NOT USE THE PRIMING VALVE TO REGULATE PRESSURE.
TO INCREASE PRESSURE:
1. Turn on the pump. Prime, if necessary.
2. DO NOT SPRAY WHILE ADJUSTING.
3. Turn the PRESSURE REGULATOR clockwise
and monitor the PRESSURE GAUGE until you
have reached the desired Pressure.
WARNING: DO NOT EXCEED 500PSI!
10
CLEANING CARPET:
1. Using a dedicated dry vacuum, pre-vacuum the space
to be cleaned to remove as much dirt as possible. Do
not use the extractor to dry vacuum as it does not
have a dry lter.
2. Pre-spray the carpet
3. See steps 1-11 in section “How to use an accessory
heater”
4. Make sure the drain valve (#10 on page 6) is closed by
pushing the T-handle all the way in.
5. Always use de-foamer- Previously shampooed carpets
usually have a heavy build-up of old shampoo residue
which can cause the vacuum system to ingest foam
and result in damage to the vacuum motor.
6. With the vacuum and pump switches in the “ON”
position, slowly pull the tool towards you with the
solution valve trigger pressed. Make a dry pass forward and backward over the cleaned area to recover
residual dirt and solution.
7. Do not overwet carpet! Make overlapping passes to
prevent streaking.
8. If the carpet is heavily soiled, squeeze solution valve
trigger on the forward pass as well as backwards,
allowing cleaning solution a few seconds longer to
work prior to vacuuming. Another method is to raise
the wand 8” above the carpet and pre-spray lightly
prior to cleaning passes. On extremely soiled carpets,
we recommend using a pre-spray solution.
9. When you are close to running out of solution, turn
o the pump and the heater. Attach the drain elbow
on the drain valve. Place a pail under the downspout
and pull up the drain valve T-handle. Dirty solution
will pour out until the tank is empty. Close the drain
valve. Use a clean bucket when you rell the solution
tank so you do not create contamination.
10. When the job is completed, turn the switches o,
including the heater, and disconnect the vacuum and
solution hoses from the carpet tool and the machine.
Drain the recovery tank through the drain valve as
before.
CLEANING UPHOLSTERY:
Cleaning upholstery with success requires a good knowledge of the type of fabric to be worked on. Look for the
cleaning instruction label sewn on the underside of the
furniture for the recommended method of cleaning the
fabric. If it calls for dry cleaning, do not attempt to clean
with the wet extraction method. Otherwise, damage to
the fabric could occur. Extraction works perfectly on
most synthetic fabrics including synthetic velvets.
Before proceeding, test the fabric for colourfastness.
Apply a small amount of ready-to-use cleaning solution
on the fabric in an inconspicuous spot. Wait for 2 to 3
minutes and rub the area with a white terry cloth towel.
If no color comes o the towel, the fabric should be safe
to clean. If a little color comes o, there is some risk of
colors running when you clean. It may be possible to
stabilise colors by cleaning with an acidic rinse.
1. Using a dedicated dry vacuum, pre-vacuum the space
to be cleaned to remove as much dirt as possible. Do
not use the extractor to dry vacuum as it does not
have a dry lter.
2. See steps 1-11 in section “How to use an accessory
heater”
3. Make sure the drain valve (#10 on page 6) is closed by
pushing the T-handle all the way in.
4. Attach an upholstery tool to the hose set.
5. Always use de-foamer. Previously cleaned upholstery
may have a heavy build-up of old shampoo residue
which can cause the vacuum system to ingest foam
and result in damage to the vacuum motor.
6. With the vacuum and pump switches in the “ON” position, slowly pull the tool backward with the solution
valve trigger pressed. Make a dry pass forward and
backward over the cleaned area to recover residual
dirt and solution.
7. Clean using as little solution as possible. Do not
overwet the upholstery! Make overlapping passes to
prevent streaking.
8. On heavily soiled areas like arm rests, pre-treat with a
recommended pre-spray and /or hold the upholstery
tool a few inches above the fabric and press lever to
spray on the solution before making a pass.
11
2000CX-HR
2700CX-HR
7-6-16
MOTOR HOUSING
HANDLE
WHITE
BLACK
WIRING DIAGRAM
12
BLACK
RECTIFIER
2
RED
YELLOW
PINK
2000FX-HR
2700FX-HR
7-6-16
AC
AC
MOTOR HOUSING
HANDLE
WHITE
WHITE
BLACK
BLACK
WIRING DIAGRAM
13
14 15
13
11
12
10
3
1
2
17 1816
201921
27
24
26
22 23
25
28
29
30
31
32
33
34
35
38
39
40
41
42
34
43
44
45
46
47
47
48
5 49
51
52
37
36
8
36
6
4
50
9B
9A
9C
9D
9
9A
9B
9C
9D
2000CX-HR UPPER
6-23-16
ITEM
NO.
1
F11787 Solution Tank
2
F11788 Recovery Tank
3
F11791 Lid, Solution Tank
8
E11124 Gasket, Recovery Tank
9
12904A Stand Pipe Assembly
K11965 Elbow, 180 Deg. Float Ball
K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht
K00741 Adapter
10989-2A Float Ball Screen
10
F11785 Lid, Recovery Tank
11
C12039 Washer, 1-4 X 1, SS
12
C02322 1-4 X 20 Bolt
13
B11769 Extension Cord, 12-3 SJTW
14
C11177 Velcro Strap
15
H02548-2 Label, Important, Cord
16
B00185-30 Wires, 73 in
17
B00185-40 Wires, 73 in
18
B010314 Wire Harness
19
F11786 Handle
20
B00177 Terminal Lug, Female, QD, .25 X .032, 16-14 AWG, Fully Insulated
21
B00185-40 Wire,14 GA Black, UL1015, 10 in
22
C00295-1 #10 X .75in Pan, Black SMS, Phillips
23
C00293 #8 X .5in Pan, Black SMS, Phillips
24
D11168 Cover, Switchplate, Galaxy
25
B02211-1 Switch, Rocker, Green Light
26
D010284 Switchplate
27
E010453 Gasket, Switchplate
28
B00177-1 Terminal Lug, Female, QD, .25 X .032
29
B00185-30 Wire,14 GA White, UL1015, 10 in
30
C02315 Lockwasher, #10 Int. Str, SS
31
C00264 Nut, 10-32
32
C11141 Screw, Allen Head, 10-24 X 1.25 in
33
K00665-1 Hose Adapter, 1.5in, Black
34
E11128 Gasket, Drain Valve
35
C00313 Hex Bolt, 1-4 X 20 X .5 SS
36
C00233 Washer, Flat, .25 in
37
C02312 Lockwasher, .25 in., Internal Star
38
D010283 Plate, Heater Mounting
39
F11804 Heater Mount
40
C00261 Nut, .25-20, Hex
41
K00710 Elbow, Drain Valve, Black
42
K00711 Drain Valve, Black
43
C00254 Lock Washer, 1-4in Split
44
C02294 Screw, 1-4 20 X 1.25
45
K11185 Elbow, 90, 1.5 in, MT-MS, PVC
46
K00672-1 Pvc Pipe, 1.5 X 2.25 in, Sch 40 Wht
47
E11129 Gasket, 5 ft. Long
48
A90004 .50 Barb X .25 MP, Brass
49
D00373 Inlet Filter, .25 NPT
50
A00124 Hex Nut, .25 NPT Brass
51
C11143 Screw, 1-4 20 X 1.5 in, SS Pan Head, Phillips
52
S11179 Non-Skid Tape, 1 in. Roll
A00060 3-8 Barb X 1-4MP, Brass
A00052 90 Elbow, .25MP X .25FP
C11244 Washer, .56 X 1.5 X .05
4
5
6
14
2000CX-HR UPPER
6-23-16
ITEM
NO.
1
F11787 Solution Tank
F11788 Recovery Tank
2
3
F11791 Lid, Solution Tank
A00060 3-8 Barb X 1-4MP, Brass
4
5
A00052 90 Elbow, .25MP X .25FP
C11244 Washer, .56 X 1.5 X .05
6
8
E11124 Gasket, Recovery Tank
9
12904A Stand Pipe Assembly
K11965 Elbow, 180 Deg. Float Ball
9A
K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht
9B
K00741 Adapter
9C
9D
10989-2A Float Ball Screen
F11785 Lid, Recovery Tank
10
11
C12039 Washer, 1-4 X 1, SS
C02322 1-4 X 20 Bolt
12
13
B11769 Extension Cord, 12-3 SJTW
14
C11177 Velcro Strap
H02548-2 Label, Important, Cord
15
16
B00185-30 Wires, 73 in
17
B00185-40 Wires, 73 in
B010314 Wire Harness
18
19
F11786 Handle
B00177 Terminal Lug, Female, QD, .25 X .032, 16-14 AWG, Fully Insulated
20
B00185-40 Wire,14 GA Black, UL1015, 10 in
21
22
C00295-1 #10 X .75in Pan, Black SMS, Phillips
23
C00293 #8 X .5in Pan, Black SMS, Phillips
24
D11168 Cover, Switchplate, Galaxy
25
B02211-1 Switch, Rocker, Green Light
26
D010284 Switchplate
27
E010453 Gasket, Switchplate
B00177-1 Terminal Lug, Female, QD, .25 X .032
28
29
B00185-30 Wire,14 GA White, UL1015, 10 in
C02315 Lockwasher, #10 Int. Str, SS
30
C00264 Nut, 10-32
31
C11141 Screw, Allen Head, 10-24 X 1.25 in
32
33
K00665-1 Hose Adapter, 1.5in, Black
E11128 Gasket, Drain Valve
34
35
C00313 Hex Bolt, 1-4 X 20 X .5 SS
C00233 Washer, Flat, .25 in
36
C02312 Lockwasher, .25 in., Internal Star
37
38
D010283 Plate, Heater Mounting
F11804 Heater Mount
39
40
C00261 Nut, .25-20, Hex
41
K00710 Elbow, Drain Valve, Black
42
K00711 Drain Valve, Black
C00254 Lock Washer, 1-4in Split
43
44
C02294 Screw, 1-4 20 X 1.25
K11185 Elbow, 90, 1.5 in, MT-MS, PVC
45
K00672-1 Pvc Pipe, 1.5 X 2.25 in, Sch 40 Wht
46
47
E11129 Gasket, 5 ft. Long
48
A90004 .50 Barb X .25 MP, Brass
D00373 Inlet Filter, .25 NPT
49
A00124 Hex Nut, .25 NPT Brass
50
C11143 Screw, 1-4 20 X 1.5 in, SS Pan Head, Phillips
51
52
S11179 Non-Skid Tape, 1 in. Roll
PART NUMBER
QTY.
1
1
1
2
3
3
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
2
1
2
2
1
3
1
1
4
1
2
1
8
1
2
6
8
2
1
1
2
1
1
2
2
1
1
1
1
2
2
2
1
15
14 15
13
11
12
10
3
1
2
17 1816
201921
27
24
26
22 23
25
28
29
30
31
32
33
34
35
38
39
40
41
42
34
43
44
45
46
47
47
48
5 49
51
52
37
36
8
36
6
4
50
9B
9A
9C
9D
9
9A
9B
9C
9D
2000FX-HR Upper
6-23-16
ITEM
NO.
1
F11787 Solution Tank
2
F11788 Recovery Tank
3
F11791 Lid, Solution Tank
8
E11124 Gasket, Recovery Tank
9
12904A Stand Pipe Assembly
K11965 Elbow, 180 Deg. Float Ball
K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht
K00741 Adapter
10989-2A Float Ball Screen
10
F11785 Lid, Recovery Tank
11
C12039 Washer, 1-4 X 1, SS
12
C02322 1-4 X 20 Bolt
13
B11769 Extension Cord, 12-3 SJTW
14
C11177 Velcro Strap
15
H02548-2 Label, Important, Cord
16
B00185-30 Wires, 73 in
17
B00185-40 Wires, 73 in
18
B010314 Wire Harness
19
F11786 Handle
20
B00177 Terminal Lug, Female, QD, .25 X .032, 16-14 AWG, Fully Insulated
21
B00185-40 Wire,14 GA Black, UL1015, 10 in
22
C00295-1 #10 X .75in Pan, Black SMS, Phillips
23
C00293 #8 X .5in Pan, Black SMS, Phillips
24
D11168 Cover, Switchplate, Galaxy
25
B02211-1 Switch, Rocker, Green Light
26
D010284 Switchplate
27
E010453 Gasket, Switchplate
28
B00177-1 Terminal Lug, Female, QD, .25 X .032
29
B00185-30 Wire,14 GA White, UL1015, 10 in
30
C02315 Lockwasher, #10 Int. Str, SS
31
C00264 Nut, 10-32
32
C11141 Screw, Allen Head, 10-24 X 1.25 in
33
K00665-1 Hose Adapter, 1.5in, Black
34
E11128 Gasket, Drain Valve
35
C00313 Hex Bolt, 1-4 X 20 X .5 SS
36
C00233 Washer, Flat, .25 in
37
C02312 Lockwasher, .25 in., Internal Star
38
D010283 Plate, Heater Mounting
39
F11804 Heater Mount
40
C00261 Nut, .25-20, Hex
41
K00710 Elbow, Drain Valve, Black
42
K00711 Drain Valve, Black
43
C00254 Lock Washer, 1-4in Split
44
C02294 Screw, 1-4 20 X 1.25
45
K11185 Elbow, 90, 1.5 in, MT-MS, PVC
46
K00672-1 Pvc Pipe, 1.5 X 2.25 in, Sch 40 Wht
47
E11129 Gasket, 5 ft. Long
48
A90004 .50 Barb X .25 MP, Brass
49
D00373 Inlet Filter, .25 NPT
50
A00124 Hex Nut, .25 NPT Brass
51
C11143 Screw, 1-4 20 X 1.5 in, SS Pan Head, Phillips
52
S11179 Non-Skid Tape, 1 in. Roll
16
2000FX-HR Upper
6-23-16
ITEM
NO.
1
F11787 Solution Tank
F11788 Recovery Tank
2
3
F11791 Lid, Solution Tank
8
E11124 Gasket, Recovery Tank
9
12904A Stand Pipe Assembly
K11965 Elbow, 180 Deg. Float Ball
9A
K00672 Pvc Pipe, 1.5 X 12 in, Sch 40 Wht
9B
K00741 Adapter
9C
9D
10989-2A Float Ball Screen
F11785 Lid, Recovery Tank
10
11
C12039 Washer, 1-4 X 1, SS
C02322 1-4 X 20 Bolt
12
13
B11769 Extension Cord, 12-3 SJTW
14
C11177 Velcro Strap
15
H02548-2 Label, Important, Cord
16
B00185-30 Wires, 73 in
17
B00185-40 Wires, 73 in
B010314 Wire Harness
18
19
F11786 Handle
B00177 Terminal Lug, Female, QD, .25 X .032, 16-14 AWG, Fully Insulated
20
B00185-40 Wire,14 GA Black, UL1015, 10 in
21
22
C00295-1 #10 X .75in Pan, Black SMS, Phillips
23
C00293 #8 X .5in Pan, Black SMS, Phillips
24
D11168 Cover, Switchplate, Galaxy
25
B02211-1 Switch, Rocker, Green Light
26
D010284 Switchplate
27
E010453 Gasket, Switchplate
B00177-1 Terminal Lug, Female, QD, .25 X .032
28
29
B00185-30 Wire,14 GA White, UL1015, 10 in
C02315 Lockwasher, #10 Int. Str, SS
30
C00264 Nut, 10-32
31
C11141 Screw, Allen Head, 10-24 X 1.25 in
32
33
K00665-1 Hose Adapter, 1.5in, Black
E11128 Gasket, Drain Valve
34
35
C00313 Hex Bolt, 1-4 X 20 X .5 SS
C00233 Washer, Flat, .25 in
36
C02312 Lockwasher, .25 in., Internal Star
37
38
D010283 Plate, Heater Mounting
F11804 Heater Mount
39
40
C00261 Nut, .25-20, Hex
41
K00710 Elbow, Drain Valve, Black
42
K00711 Drain Valve, Black
C00254 Lock Washer, 1-4in Split
43
44
C02294 Screw, 1-4 20 X 1.25
K11185 Elbow, 90, 1.5 in, MT-MS, PVC
45
K00672-1 Pvc Pipe, 1.5 X 2.25 in, Sch 40 Wht
46
47
E11129 Gasket, 5 ft. Long
48
A90004 .50 Barb X .25 MP, Brass
D00373 Inlet Filter, .25 NPT
49
A00124 Hex Nut, .25 NPT Brass
50
C11143 Screw, 1-4 20 X 1.5 in, SS Pan Head, Phillips
51
52
S11179 Non-Skid Tape, 1 in. Roll
DESCRIPTION
QTY.
1
1
1
2
3
3
1
1
1
1
1
1
1
1
2
2
2
2
2
1
1
1
1
2
1
2
2
1
3
1
1
4
1
2
1
8
1
2
6
8
2
1
1
2
1
1
2
2
1
1
1
1
2
2
2
1
17
70
ITEM
QTY.
ITEM
QTY.
1
J13152 Double grip hose Clamp
1
2
J11863 Vac Exhaust hose, 2” diameter
1 ft
3
J00639 Screw Clamp, 1.63
4
4
J00618 Hose , V ac base to waste tank
22”
5
F11178-BLK Intercooler, Galaxy, Black
1
6
C00273 Locknut, 1-4 X 20, Nylon, SS
18
7
C00233 Washer, Flat, .25 in
31
8
E00449 Grommet
6
9
C00284 Screw, 10-32 X .375 Ground
2
10
B11150 Ground Wire, Galaxy
2
11
G13394 Vacuum,115 V, 5.7 in
2
12
J00618 Vacuum Hose, 2 in Grey
6”
13
C00261 Nut, .25-20, Hex
12
14
C00254 Lock Washer, 1-4in Split
1
15
D11134-1 Vac Plate
1
16
C11189 Screw, 1 -4 X 20 X 4.5 in, Hex
5
17
C11516 Screw, 1 -4 X 20 X 4.5 in, Flat
1
18
J11154 Hose, regulator to solution tank
28”
19
J00651 Hose Clamp 1-5/8 x 2 -7/16
4
20
A00060 .25 Male X .375 Barb, Brass
1
21
A00053 45 Elbow, .25MP X .25 FP
1
22
G13441 Regulator Valve
1
23
A00052 90 Elbow, .25MP X .25FP
4
24
00580 -10in-MF -A Hose Assembly
1
25
00580 -12IN -MF-A Hose Assembly
1
26
A00114B Hex Nipple 1/4MP x 1/8MP
1
27
G13380 Pressure relief/ Power prime
1
28
A00134 90 elbow, 1/4B x 1/8MP
1
29
A13881 Check valve, 450 series
30
C11244 Washer, .56 X 1.5 X .05
7
31
C12021 Washer, 9/16 ID
1
32
A00139 Hose Barb 1/4MPx1/4B
1
33
34
A00161 Tee, .25 FP, Brass
1
35
A00111 Nipple, .25 in
1
36
A00104 QD, 1-4 M X 1-4 FP, Brass
1
37
G13051 Gauge, 0-1000PSI
1
38
C11440 Spacer, Heater Mounting Plate
4
39
C02322 Hex Bolt,1-4 X 20 X 1.75 in
4
40
D010379 Heater Mounting Plate
1
41
C11165, Screw, #8 X 1 in, Pan, Black
5
42
F
11790 Heater, Tunnel Cover, Blue
1
43
B11779 12-3 Twist lock plug
1
44
B00191 Nylon Tie, 11in Black
5
45
C00293 #8 X .5in Pan, Black SMS, Phillips
2
46
B00192 Tie Holder with Glue
2
47
B11606 Strain Relief, Pigtail
1
48
C02305 Cap Nut, .5in Push
2
49
C00240 Washer, Shoulder, Nylon
4
50
G11767 Wheel, 10 in
2
51
D11170 Axle
1
52
F11789 Base
1
53
C00314-1 Hex Bolt, 1/4 X 20 X 1in
8
54
G03518-L Locking Caster, 4 in
2
55
F13820 3” Louver
1
56
B00177 Terminal Lug
2
57
C 11955 Flat Washer, #10
1
58
C13026 Screw 10-32 x 1 ” hex
4
59
B02229 Bridge rectier
1
60
G13872 Pump, 500 PSI, 120 V
1
61
A13430 90 E lbow 3/8MP x .5B
1
62
A12917 90 E lbow 1/4F x 3/8M NPT
2
63
J00632 -1 Pulse Hose, 32 in
2
64
B00190 Nylon Tie, 4in
12
65
D13866 Pump mounting plate
1
66
H02564 -2 Label, Caution, Motor
1
67
J11508 Hose Clamp 1/ 2" - 3/4"
2
68
J11933 Hose Solution Tank to Pump “IN ”
17”
69
J00618 Vacuum Hose. Exhaust to plate
7”
70
E11169 Gasket, Vac Motor, Galaxy
2
J11554-1 Hose- pressure relief to waste tank
69
16
1
2
3546
7
2000CX-HR
8
9
10
BASE 6-23-16
11
3
12
3
13
14
15
16
23
7
18
20
21
22
24
25
33
26
27
28
29
23
30
19
32
31
14
64
65
17
66
30
26
34
19
6
7
67
68
38
35
39
36
40
30
37
41
63
61
60
62
57
59
54
7
53
58
56
10
55
18
46
4445
47
49
5152 50 4849
43
42
ITEM
QTY.
ITEM
QTY.
1
1
2
1 ft
3
4
4
J00618 Hose , Vac base to waste tank
22”
5
1
6
18
7
C00233 Washer, Flat, .25 in
31
8
6
9
2
10
2
11
2
12
6”
13
12
14
1
15
1
16
C11189 Screw, 1 -4 X 20 X 4.5 in, Hex
517C11516 Screw, 1 -4 X 20 X 4.5 in, Flat
1
18
28”
19
4
20
A00060 .25 Male X .375 Barb, Brass
1
21
A00053 45 Elbow, .25MP X .25 FP
1
22
G13441 Regulator Valve
1
23
4
24
1
25
00580 -12IN -MF-A Hose Assembly
1
26
A00114B Hex Nipple 1/4MP x 1/8MP
1
27
1
28
A00134 90 elbow, 1/4B x 1/8MP
1
29
30
C11244 Washer, .56 X 1.5 X .05
7
31
1
32
1
33
34
A00161 Tee, .25 FP, Brass
1
35
A00111 Nipple, .25 in
1
36
1
37
1
38
C11440 Spacer, Heater Mounting Plate
4
39
4
40
D010379 Heater Mounting Plate
1
41
C11165, Screw, #8 X 1 in, Pan, Black
5
42
1
43
1
44
B00191 Nylon Tie, 11in Black
5
45
C00293 #8 X .5in Pan, Black SMS, Phillips
2
46
B00192 Tie Holder with Glue
247B11606 Strain Relief, Pigtail
1
48
C02305 Cap Nut, .5in Push
2
49
C00240 Washer, Shoulder, Nylon
4
50
G11767 Wheel, 10 in
2
51
D11170 Axle
1
52
1
53
8
54
2
55
1
56
B00177 Terminal Lug
2
57
C 11955 Flat Washer, #10
1
58
4
59
B02229 Bridge rectier
1
60
1
61
A13430 90 E lbow 3/8MP x .5B
1
62
A12917 90 E lbow 1/4F x 3/8M NPT
2
63
2
64
B00190 Nylon Tie, 4in
12
65
D13866 Pump mounting plate
1
66
H02564 -2 Label, Caution, Motor
1
67
2
68
17”
69
7”
70
E11169 Gasket, Vac Motor, Galaxy
2
2000CX-HR 6-23-16
PART NUMBER
J13152 Double grip hose Clamp
J11863 Vac Exhaust hose, 2” diameter
J00639 Screw Clamp, 1.63
F11178-BLK Intercooler, Galaxy, Black
C00273 Locknut, 1-4 X 20, Nylon, SS
E00449 Grommet
C00284 Screw, 10-32 X .375 Ground
B11150 Ground Wire, Galaxy
G13394 Vacuum,115 V, 5.7 in
J00618 Vacuum Hose, 2 in Grey
C00261 Nut, .25-20, Hex
C00254 Lock Washer, 1-4in Split
D11134-1 Vac Plate
J11154 Hose, regulator to solution tank
J00651 Hose Clamp 1-5/8 x 2 -7/16
A00052 90 Elbow, .25MP X .25FP
00580 -10in-MF -A Hose Assembly
G13380 Pressure relief/ Power prime
- 2.43in.
A13881 Check valve, 450 series
C12021 Washer, 9/16 ID
A00139 Hose Barb 1/4MPx1/4B
J11554-1 Hose- pressure relief to waste tank
A00104 QD, 1-4 M X 1-4 FP, Brass
G13051 Gauge, 0-1000PSI
C02322 Hex Bolt,1-4 X 20 X 1.75 in
F
11790 Heater, Tunnel Cover, Blue
B11779 12-3 Twist lock plug
-on
F11789 Base
C00314-1 Hex Bolt, 1/4 X 20 X 1in
G03518-L Locking Caster, 4 in
F13820 3” Louver
C13026 Screw 10-32 x 1 ” hex
G13872 Pump, 500 PSI, 120 V
J00632 -1 Pulse Hose, 32 in
J11508 Hose Clamp 1/ 2" - 3/4"
J11933 Hose Solution Tank to Pump “IN ”
J00618 Vacuum Hose. Exhaust to plate
19
70
ITEM
QTY.
ITEM
QTY.
1
J13152 Double grip hose Clamp
1
2
J11863 Vac Exhaust hose, 2” diameter
1 ft
3
J00639 Screw Clamp, 1.63
4
4
J00618 Hose , V ac base to waste tank
22”
5
F11178-BLK Intercooler, Galaxy, Black
1
6
C00273 Locknut, 1-4 X 20, Nylon, SS
18
7
C00233 Washer, Flat, .25 in
31
8
E00449 Grommet
6
9
C00284 Screw, 10-32 X .375 Ground
2
10
B11150 Ground Wire, Galaxy
2
11
G002522L Vacuum,115 V, 5.7 in
2
12
J00618 Vacuum Hose, 2 in Grey
6”
13
C00261 Nut, .25-20, Hex
12
14
C00254 Lock Washer, 1-4in Split
1
15
D11134-1 Vac Plate
1
16
C11189 Screw, 1 -4 X 20 X 4.5 in, Hex
5
17
C11516 Screw, 1 -4 X 20 X 4.5 in, Flat
1
18
J11154 Hose, regulator to solution tank
28”
19
J00651 Hose Clamp 1-5/8 x 2 -7/16
4
20
A00060 .25 Male X .375 Barb, Brass
1
21
A00053 45 Elbow, .25MP X .25 FP
1
22
G13441 Regulator Valve
1
23
A00052 90 Elbow, .25MP X .25FP
4
24
00580 -10in-MF -A Hose Assembly
1
25
00580 -12IN -MF-A Hose Assembly
1
26
A00114B Hex Nipple 1/4MP x 1/8MP
1
27
G1 3380 Pressure relief/ Power prime
1
28
A00134 90 elbow, 1/4B x 1/8MP
1
29
A13881 Check valve, 450 series
30
C11244 Washer, .56 X 1.5 X .05
7
31
C12021 Washer, 9/16 ID
1
32
A00139 Hose Barb 1/4MPx1/4B
1
33
34
A00161 Tee, .25 FP, Brass
1
35
A00111 Nipple, .25 in
1
36
A00104 QD, 1-4 M X 1-4 FP, Brass
1
37
G13051 Gauge, 0-1000PSI
1
38
C11440 Spacer, Heater Mounting Plate
4
39
C02322 Hex Bolt,1-4 X 20 X 1.75 in
4
40
D010379 Heater Mounting Plate
1
41
C11165, Screw, #8 X 1 in, Pan, Black
5
42
F
11790 Heater, Tunnel Cover, Blue
1
43
B11779 12-3 Twist lock plug
44
B00191 Nylon Tie, 11in Black
5
45
C00293 #8 X .5in Pan, Black SMS, Phillips
2
46
B00192 Tie Holder with Glue
2
47
B11606 Strain Relief, Pigtail
48
C02305 Cap Nut, .5in Push
2
49
C00240 Washer, Shoulder, Nylon
4
50
G11767 Wheel, 10 in
2
51
D11170 Axle
1
52
F11789 Base
1
53
C00314-1 Hex Bolt, 1/4 X 20 X 1in
8
54
G03518-L Locking Caster, 4 in
2
55
F13820 3” Louver
1
56
B00177 Terminal Lug
2
57
C 11955 Flat Washer, #10
1
58
C13026 Screw 10-32 x 1 ” hex
4
59
B02229 Bridge rectier
1
60
G13872 Pump, 500 PSI, 120 V
1
61
A13430 90 E lbow 3/8MP x .5B
1
62
A12917 90 E lbow 1/4F x 3/8M NPT
2
63
J00632 -1 Pulse Hose, 32 in
2
64
B00190 Nylon Tie, 4in
12
65
D13866 Pump mounting plate
1
66
H02564 -2 Label, Caution, Motor
1
67
J11508 Hose Clamp 1/ 2" - 3/4"
2
68
J11933 Hose Solution Tank to Pump “IN ”
17”
69
J00618 Vacuum Hose. Exhaust to plate
7”
70
E11169 Gasket, Vac Motor, Galaxy
2
J11554-1 Hose- pressure relief to waste tank
69
16
1
2
3546
7
2000FX-HR
8
9
10
BASE 6-23-16
11
3
12
3
13
14
15
16
23
7
18
20
21
22
24
25
33
26
27
28
29
23
30
19
32
31
14
17
30
26
34
19
64
65
66
6
7
67
68
38
35
39
36
40
30
37
41
63
61
60
62
57
59
54
7
53
58
56
10
55
20
46
4445
47
49
5152 50 4849
43
42
ITEM
QTY.
ITEM
QTY.
1
1
2
1 ft
3
4
4
J00618 Hose , Vac base to waste tank
22”
5
1
6
18
7
C00233 Washer, Flat, .25 in
31
8
6
9
2
10
2
11
2
12
6”
13
12
14
1
15
1
16
C11189 Screw, 1 -4 X 20 X 4.5 in, Hex
517C11516 Screw, 1 -4 X 20 X 4.5 in, Flat
1
18
28”
19
4
20
A00060 .25 Male X .375 Barb, Brass
1
21
A00053 45 Elbow, .25MP X .25 FP
1
22
G13441 Regulator Valve
1
23
4
24
1
25
00580 -12IN -MF-A Hose Assembly
1
26
A00114B Hex Nipple 1/4MP x 1/8MP
1
27
G1 3380 Pressure relief/ Power prime
1
28
A00134 90 elbow, 1/4B x 1/8MP
1
29
30
C11244 Washer, .56 X 1.5 X .05
7
31
1
32
1
33
34
A00161 Tee, .25 FP, Brass
1
35
A00111 Nipple, .25 in
1
36
1
37
1
38
C11440 Spacer, Heater Mounting Plate
4
39
4
40
D010379 Heater Mounting Plate
1
41
C11165, Screw, #8 X 1 in, Pan, Black
5
42
1
43
44
B00191 Nylon Tie, 11in Black
5
45
C00293 #8 X .5in Pan, Black SMS, Phillips
2
46
B00192 Tie Holder with Glue
247B11606 Strain Relief, Pigtail
48
C02305 Cap Nut, .5in Push
2
49
C00240 Washer, Shoulder, Nylon
4
50
G11767 Wheel, 10 in
2
51
D11170 Axle
1
52
1
53
8
54
2
55
1
56
B00177 Terminal Lug
2
57
C 11955 Flat Washer, #10
1
58
4
59
B02229 Bridge rectier
1
60
1
61
A13430 90 E lbow 3/8MP x .5B
1
62
A12917 90 E lbow 1/4F x 3/8M NPT
2
63
2
64
B00190 Nylon Tie, 4in
12
65
D13866 Pump mounting plate
1
66
H02564 -2 Label, Caution, Motor
1
67
2
68
17”
69
7”
70
E11169 Gasket, Vac Motor, Galaxy
2
2000FX-HR 6-23-16
PART NUMBER
J13152 Double grip hose Clamp
J11863 Vac Exhaust hose, 2” diameter
J00639 Screw Clamp, 1.63
F11178-BLK Intercooler, Galaxy, Black
C00273 Locknut, 1-4 X 20, Nylon, SS
E00449 Grommet
C00284 Screw, 10-32 X .375 Ground
B11150 Ground Wire, Galaxy
G002522L Vacuum,115 V, 5.7 in
J00618 Vacuum Hose, 2 in Grey
C00261 Nut, .25-20, Hex
C00254 Lock Washer, 1-4in Split
D11134-1 Vac Plate
J11154 Hose, regulator to solution tank
J00651 Hose Clamp 1-5/8 x 2 -7/16
A00052 90 Elbow, .25MP X .25FP
00580 -10in-MF -A Hose Assembly
A13881 Check valve, 450 series
C12021 Washer, 9/16 ID
A00139 Hose Barb 1/4MPx1/4B
J11554-1 Hose- pressure relief to waste tank
- 2.43in.
PART NUMBER
A00104 QD, 1-4 M X 1-4 FP, Brass
G13051 Gauge, 0-1000PSI
C02322 Hex Bolt,1-4 X 20 X 1.75 in
F
11790 Heater, Tunnel Cover, Blue
B11779 12-3 Twist lock plug
-on
F11789 Base
C00314-1 Hex Bolt, 1/4 X 20 X 1in
G03518-L Locking Caster, 4 in
F13820 3” Louver
C13026 Screw 10-32 x 1 ” hex
G13872 Pump, 500 PSI, 120 V
J00632 -1 Pulse Hose, 32 in
J11508 Hose Clamp 1/ 2" - 3/4"
J11933 Hose Solution Tank to Pump “IN ”
J00618 Vacuum Hose. Exhaust to plate
2
2
21
TROUBLESHOOTING
ELECTRICAL SYSTEM
PROBLEM SOLUTION
NO ELECTRICAL POWER 1. Defective power cord.
2. House or building circuit breaker tripped
POWER IS INTERMITTENT TO ONE OR ALL MOTORS
VACUUM SYSTEM
PROBLEM SOLUTION
NO VACUUM SUCTION 1. Drain Valve open.
LOW VACUUM SUCTION 1. Accumulated dirt on intake lter screen.
1. Faulty electrical cable.
2. Defective switches.
3. Loose terminal or discolored terminal connections.
2. Vacuum lid is not sealed against tank.
3. Loose vacuum hose, vacuum connection
2. Worn out vacuum lid gasket.
3. Lint & dirt build-up on wand head.
4. Defective vacuum hose.
5. Loose connection in the vacuum motor.
SOLUTION SYSTEM
PROBLEM SOLUTION
PUMP MOTOR RUNS BUT NO SPRAY THROUGH
SPRAY TIPS
UNEVEN OR WEAK SPRAY FOR SPRAY TIPS 1. Clogged or dirty spray tips.
ERRATIC PRESSURE 1. Pump check valves defective or dirty
1. Clogged spray tips.
2. Clogged solution intake lter screen.
3. Clogged female quick disconnect coupler.
4. Quick disconnects not fully connected
5. Dirty or damaged pump head valves.
6. Defective pump check valve.
7. Crack in pump housing.
8. Lost Prime.
2. Accumulated dirt on solution intake lter screen.
3. Accumulation of debris inside pump and plumbing.
4. Worn pump bearing (excessive noise).
5. Punctured pump diaphragm.
6. Defective rectier or motor.
7. Worn nozzles.
8. Priming valve is open. Close Pressure relief/priming
valve
2. Lost prime.
22
NOTES
_________________
23
Quality Above All
The following Limited 5-year Warranty is given by EDIC with respect to the following specific
EDIC products:
Polaris
Saturn High Speed
Aviator
Supernova
Saturn Low Speed
Galaxy Pro
Aqua Dri
2 Years Parts & Labor
TORO HD Orbital
TORO Orbital
FloodBuster
Extractors
1725-TES has a 4-year
1725-TPT has a 2-year
Warranty Registration:
To register your product warranty, visit our website at:
www.edic-usa.com/warranty-registration/
EDIC STANDARD LIMITED WARRANTY PLAN FOR MACHINES MANUFACTURED AFTER 2/14/2017
Galaxy 5
Endeavor
Heat N Run
The following Warranty is given by EDIC with respect to the following specific EDIC products:
Dynamo Vacuums
Pilot Autoscrubber
Galaxy Automotive
LIFETIME on rotationally molded polyethylene tanks, stainless steel heater tank and Saturn stainless steel
brush covers.
5 YEARS on service labor, and all other parts not covered by the Lifetime terms.
2 YEARS on service labor, and all other parts not covered by the Lifetime terms.
Fivestar
Galaxy
Bravo
parts warranty and a
2-year labor warranty
Saturn Dual Speed
Saturn HD Low Speed
Atlas
CR2 Restroom Cleaner
parts warranty and a
1-year labor warranty
EDIC REPLACEMENT PARTS LIMITED WARRANTY PLAN
All parts sold as replacement parts for out-of-warranty EDIC products have the following Limited Warranty,
with no warranty on labor: 30 DAYS
Your product is warranted to be free of defects in material and workmanship for the period set forth above,
after the date of delivery to the retail purchaser, when operated in normal service and used in accordance
with the operating and maintenance instructions in the Owner’s Manual. This warranty is limited to and
provides at no cost to the retail purchaser repair or replacement of parts determined to be defective, at EDIC’s
option, and labor, if provided for above, to replace or repair the parts (“service labor”) according to EDIC’s
Standard Rates, during the warranty period set forth above. This warranty excludes transportation charges
unless authorized in writing by EDIC. No warranty returns for refund or credit will be permitted. In the event of
a defect, these are your exclusive remedies. Warranty claims must be made in writing to EDIC prior to
returning the product and no products will be accepted for repair or replacement without prior authorization
by EDIC. Use of parts not approved by EDIC in EDIC products will void this warranty. Warranty repair or
replacement shall not extend the original warranty period of the product, and replacement parts used for in-
1753 Blake Ave., Los Angeles, CA 90031 | 800.338.3342 | www.edic-usa.com
24
Quality Above All
warranty repairs will only be warranted for the remainder of the original warranty and not from their
installation date. Any parts or product replaced under this Limited Warranty will become the property of EDIC.
EXCEPTIONS AND EXCLUSIONS FROM THE WARRANTY. This Limited Warranty only covers product issues
caused by defects in material or workmanship during normal service. It does not cover product issues from
any other cause, including but not limited to (a) transportation damages; (b) alteration by unauthorized
persons; (c) unauthorized use, unreasonable use, misuse, or abuse (including the use of incompatible or
corrosive chemicals or overloading of capacity); (d) failure caused by lack of proper maintenance and cleaning;
(e) normal wear on items such as cords, belts, hoses, switches, bumpers, gaskets, seals, carbon brushes,
squeegees, harnesses, valves, cams, extraction brushes, bearings, handle grips, filters and finishes; (f) acts of
God; or (g) modification of or any part of the product. This Limited Warranty does not cover EDIC products
sold AS IS and WITH ALL FAULTS. This Limited Warranty is valid only in the United States and Canada.
We suggest that you complete and return the enclosed product registration card promptly to facilitate
verification of the date of the original purchase. However, return of the product registration card does not
eliminate the need for the retail purchaser to maintain the original proof of the purchase in order to obtain
the warranty benefits. In the event that you do not have proof of purchase date, the purchase date for
purposes of this warranty will be the date of manufacture.
For specific information on how to obtain warranty services for your product, please write to:
EDIC/Warranty Department
1753 Blake Ave.
Los Angeles, CA 90031
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS STATEMENT.
THERE IS NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY USE ON THESE GOODS.
NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED
WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY, EXCEPT AS MENTIONED ABOVE, GIVEN
BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND EDIC. EDIC SHALL NOT BE LIABLE
FOR ANY FORM OF ACTION FOR ANY DAMAGES, WHETHER DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
OR INDIRECT, TO PROPERTY OR PERSON, INCLUDING BUT NOT LIMITED TO, DAMAGE OR LOSS OF INCOME,
LOSS OF PRODUCTION, OR LOSS OF PROFITS DUE TO MALFUNCTIONING OF ANY PRODUCT, REGARDLESS OF
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED. IN NO EVENT SHALL RECOVERY OF ANY KIND AGAINST
EDIC BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY EDIC, AND CAUSING
THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL THE RISK AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE OR MISUSE OF, OR INABILITY TO USE, THE PRODUCT NOT CAUSED DIRECTLY BY
NEGLIGENCE OF EDIC. THIS LIMITED WARRANTY STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may have other rights which vary from state to
state (or province).
0900.002/9989
1753 Blake Ave., Los Angeles, CA 90031 | 800.338.3342 | www.edic-usa.com
25
Loading...