EDI Twilite 12 Datasheet

Architectural Preset Controls

®

Twilite 12 Lighting Control Panel

Features

• 10 presets/12 Zones

• Flexible – fits any installation

• Output level LED bar graph display for each channel

• Proportional master control of every preset

• Low profile design blends with any interior

• Custom colors and nomenclature available

• DMX “copy active” to presets

• Preset preview and blind editing

• Master stations available in 1 to 12 channel modules

• Up to 512 DMX addresses (0-512) may be assigned to each of the 12 channels

• DMX input assignment to either HTP or station override

• CAT-5 plug with power and DMX provisions

• 3-digit alphanumeric display for easy programming and operation

• Individual channels may be assigned as non-dims

• 1 to 8 channels fit in a 4 gang box or 9 to 12 channels in a 5 gang box

• Non-volatile internal flash memory for channel patch and preset information

• Conforms to California Title 24 (Automatic Time Switch Lighting Control Devices)

Description

The Twilite 12 Series preset lighting control system is designed to be used in a variety of applications, from lecture halls
to multi-scene ballroom lighting. The exclusive memory function allows 10 different lighting presets. In addition to the 8
dedicated preset buttons, both the ON and OFF buttons may also be programmed as presets for a total of 10 presets.

The Twilite 12 uses the updated DMX-512A (ANSI E1.11) industry standard control protocol for dimmers, moving lights,
and LED fixtures.

Easy to program and operate, Twilite 12 control faceplates blend with current quality architectural trends and add low
profile lighting control to any room. The Twilite 12 series offers preset lighting features at an affordable price.

Ordering Information

Master Stations
(4 gang box)

 T-12 - 1 Channel
 T-12 - 2 Channels
 T-12 - 3 Channels
 T-12 - 4 Channels
 T-12 - 5 Channels
 T-12 - 6 Channels
 T-12 - 7 Channels

Master Stations
(5 gang box)

 T-12 - 8 Channels
 T-12 - 9 Channels
 T-12 - 10 Channels
 T-12 - 11 Channels
 T-12 - 12 Channels

Remote Stations

 T-12-R Remote Panel
 T-12 RDI/AV Interface
 T-12-WT2 Walk Through

(2 available presets)

 T-12-WT3 Walk Through

(3 available presets)

 T-12-WT4 Walk Through

(4 available presets)

 T-12-WT5 Walk Through

(5 available presets)

Faceplate Colors

 Big Chill (Pantone 427C) - standard
 Custom Color # ________

Electronics Diversified, Inc.

1675 NW Cornelius Pass Road • Hillsboro OR 97124 USA
[phone] • [phone] • FAX: [phone]

®

www.edionline.com

Product Datasheet

A401

January 2005

Architectural Preset Controls

®

Twilite 12 Lighting Control Panel

Electrical & Wiring Data

Control Voltage: Class II Multiplex
Conductor: Alpha 1133C/CAT-5/
CAT-5e or equivalent

Note: Remotes are daisy-chained

Riser Diagram

Alpha 1133/
CAT-5/CAT-5e
or equivalent

Remote Panel

8 dedicated pre­sets. The OFF
and ON buttons
may also be
programmed as
presets for a total
of 10 presets

Walk Through

Station

Belden 9842/
CAT-5/CAT-5e
or equivalent
DMX interface

Alpha 1133/
CAT-5/CAT-5e
or equivalent

AV Interface

Provides momen­tary and main­tained closures
through Remote
Device Interface
(RDI)

Mounting

1. Mount backbox (supplied with station). Make sure
that the front of the backbox is flush with the finished
wall.

2. Route wires from backbox to PCBA and connect to
electronics on subplate.

3. Align subplate and backbox. Attach using #6 pan­head screws (furnished).

RDI

Specifications

1. The Twilite 12 shall be a 10 scene preset lighting control with raise/lower ad­justments for each of the 12 individual channels. The system shall operate
with a digital signal between all satellite stations and master stations.

2. The Twilite 12 supports the DMX 512A (ANSI E1.11) protocol. The unit shall
have a capacity of up to 512 assignable DMX addresses for each of its chan­nels. In addition, the Twilite 12 shall include a DMX input with the capacity to
remotely record the active DMX addresses.

3. System faceplates shall be flush mounted in backboxes furnished by the manu­facturer.

4. The components of the control system may consist of the following: Master
Station, Remote Station, and Walk Through Station.

5. The Master Station shall consist of the following:
A. In addition to the 8 dedicated preset buttons, it shall be possible to pro-

gram the ON and OFF buttons as presets, for a total of 10 presets.

B. All preset buttons shall have an integral LED to indicate the status of the

station.

C. Pressing any preset button shall bring the system onto that preset at the

programmed fade rate. Master Raise/Lower key will proportionally con­trol any preset.

D. Pressing any preset button twice will override the fade rate and effect an

instant transition into the selected preset.

E. Each preset shall contain all the levels for each channel in the system in

addition to a fade rate.

F. Each master station shall have 10 selectable fade rates from 0 seconds

Electronics Diversified, Inc.

1675 NW Cornelius Pass Road • Hillsboro OR 97124 USA
[phone] • [phone] • FAX: [phone]

®

www.edionline.com

to 5 minutes. Any of these fade rates may be recorded with the channel
levels desired into any of the 10 preset scenes.

G. Each channel shall have the ability to switch from a dimmer to a non-dim.

Systems without non-dim capability shall not be acceptable.

5. It shall be possible for the OFF button to be programmed for either a security
preset or full OFF function. The ON button may also be programmed as a
preset.

6. The remote selector station shall be a 10 button station capable of operating
the system ON, OFF, and 10 presets from a remote location. Any number of
remote selectors may be supported by a single master station.

7. Walk-thru stations shall have from 2 to 5 preset buttons, including an OFF
button. The walk-thru may be either button, key switch operated, or contact
closure, as specified. The ON position will have the capacity to learn a selected
preset.

8. The Twilite 12 system shall operate with the patch interface allowing user­assignable proportional patch and channel patch features.

9. When power is restored after an outage, the Twilite 12 system shall restore the
preset which was in use prior to the outage.

10. An AV interface shall be available which will accept any 24 VDC input. The
interface shall allow ON, OFF and 8 presets to be activated by time clocks and
other contact closure devices.

11. The Twilite 12 shall be manufactured by Electronics Diversified, Inc., Hillsboro,
Oregon, 97124 USA.

Product Datasheet

A401

January 2005