EdgeWave IPRISM WSA7850, IPRISM WSA7750, IPRISM WSA7550, IPRISM 35G, IPRISM 75G Quick Start Manual

iPrism Secure Web Gateway

Quick Start Guide - V8.x

35G

75G

WSA7550

WSA7750

WSA7850

4225 Executive Sq, Ste 1600
La Jolla, CA 92037-1487

Call Us

1-800-782-3762

Email Us

[e-mail]

Visit Us

www.edgewave.com

iPrism Secure Web Gateway

Step 1. Record Setup Data for the iPrism Installation Wizard

1.1 iPrism License Key File

The iPrism license key le was emailed to the primary contact for your account.
Save it to your desktop prior to running the Install Wizard.

If you need to request your License Key le, go to http://keyrequest.edgewave.com

Example: iprism.64641.key

The Install Wizard will prompt
you to upload this le.

1.2 iPrism Model and Serial #

Record your iPrism Version and Serial Numbers for easy reference if you need to
call Technical Support.

iPrism Version:

iPrism Serial #:

1.3 iPrism Host Name

Assign a host name to the iPrism appliance. This name should reect your DNS
domain.

Example: iprism.example.com

Your value:

1.4 DNS Server

The IP address of your Primary DNS (Domain Name System) Server. DNS is
required for name-resolution and email services. You can use multiple DNS
Servers. If you use Windows Active Directory specify those name servers here.

Example: 192.168.45.30

Your value:

1.5 Assign an iPrism IP Address and Netmask

Specify an IP address and subnet mask for the iPrism to use that corresponds
with the network in which you are placing it. This will be required for appliance
discovery and later for Web-based iPrism administration.

Example: 192.168.45.92 and

255.255.255.0

Your values:

1.6 iPrism Default Gateway

This is the device in your network that iPrism will use to connect to the Internet.
Most likely this will be the inside interface of your Firewall.

Exa m pl e : 192.16 8. 45.1

Your value:

V8.xQuick Start Guide

IMPORTANT: Please read through the Quick Start Guide prior to setup. Make sure to have your iPrism License Key le

saved to your desktop, and record the information listed in Step 1 prior to installation.

Quick Installation of iPrism

The proxy-mode conguration outlined in this guide provides an easy temporary setup for evaluating and testing iPrism
using proxied client trac. Once you are familiar with using iPrism in Proxy-Mode, we recommend reconguring iPrism for
Transparent-Mode deployment to fully utilize the trac management and reporting features.

For more information on installation and conguration (including transitioning to Transparent-Mode), see the iPrism

Installation Guide available on the iPrism support page at https://www.edgewave.com/support/iprism-documentation/

Step 2. Connect the iPrism and Log In

2.1 Connect a monitor and keyboard to the iPrism and log in as the user admin. At the menu, follow the instructions for

setting the IP address for iPrism, including the netmask and default gateway. Make sure these values are reachable

from the workstation you will use to perform the initial iPrism conguration.