Edgewater Networks EdgeConnect 2402LFPoE Quick Start Manual

EdgeConnect 2402LFPoE
Managed Ethernet Switch

Quick Start Guide

Version 1.0

Thank you for the purchase of your EdgeConnect 2402LFPoE Managed
Ethernet Switch.

Please read this guide thoroughly as it describes how to initially connect
to your 2402 Switch. Please refer to the User Manual for instructions on
the physical installation and power requirements of the EdgeConnect
2402LFPoE Managed Switch. Additional information and help files
regarding the features of the 2402LFPoE Switch can be found by
accessing the “Support” link once connected to the appliance via your
web browser.

Requirements for Installation

Before You Start

• A computer with a web browser such as Microsoft Internet Explorer or
Netscape Navigator or any other browser of your choice, an available
Ethernet port, and an optional terminal emulation program if
connecting through the serial port.

• At least one Ethernet cable.

• An optional null-modem cable if connection through the console is

desired.

• If uplink and downlink fiber connection is required, then 2 fiber cables
along with 2 Mini-GBIC SPF connectors

• If uplink and downlink Ethernet connection is required then, 2 Ethernet
cables.

Page 1 of 6