Edge Products Edge EZ Installation Instructions And Manual

2004.5-2007 Dodge Cummins 5.9L (325HP)

Edge Products EZ Module

Installation Instructions and Manual

OLD P/N: EZD1000D

NEW P/N: 30204

Edge EZ User Manual Edge Products

© 2007 Edge Products

All rights reserved.

Edge Products

1080 South Depot Dr.

Ogden, UT 84404

1-888-360-3343

www.edgeproducts.com

Manual Version 5

2

Edge EZ User Manual Edge Products

Table of Contents

DISCLAIMER OF LIABILITY _________________________________________________ 4
LIMITATION OF WARRANTY_________________________________________________ 4
AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY ________________ 5
About the Dodge EZ___________________________________________________________ 7
Dodge Cummins 5.9L EZ Installation ____________________________________________ 8

Supplied Items:____________________________________________________________________8
Tools Required: ___________________________________________________________________8
MAP (Manifold Absolute Pressure) Connection ________________________________________10
Fuel Pressure Sensor Connection____________________________________________________10
Final Inspection and Operation _____________________________________________________10
Adjusting Power Levels____________________________________________________________11

Power Levels________________________________________________________________ 12
How to Use Your Edge EZ Module______________________________________________ 13

Using your Edge EZ Module_____________________________________________________________ 13

Towing__________________________________________________________________________13
Exhaust Gas Temperature _________________________________________________________14

Technical Support ___________________________________________________________ 15

3

Edge EZ User Manual Edge Products

THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK.

Do not use this product until you have carefully read the following agreement.

This sets forth the terms and conditions for the use of this product. The installation of this product indicates that the
BUYER has read and understands this agreement and accepts its terms and conditions

DISCLAIMER OF LIABILITY

Edge Products Inc. and its successors, distributors, jobbers, and dealers (hereafter SELLER) shall in no way be responsible for
the product's proper use and service. THE BUYER HEREBY WAIVES ALL LIABILITY CLAIMS.

The BUYER acknowledges that he/she is not relying on the SELLER’s skill or judgment to select or furnish goods suitable for
any particular purpose and that there are no liabilities which extend beyond the description on the face hereof and the BUYER
hereby waives all remedies or liabilities, expressed or implied, arising by law or otherwise, (including without any obligations of
the SELLER with respect to fitness, merchantability and consequential damages) or whether or not occasioned by the SELLER's
negligence.

The SELLER disclaims any warranty and expressly disclaims any liability for personal injury or damages. The BUYER
acknowledges and agrees that the disclaimer of any liability for personal injury is a material term for this agreement and the
BUYER agrees to indemnify the SELLER and to hold the SELLER harmless from any claim related to the item of the
equipment purchased. Under no circumstances will the SELLER be liable for any damages or expenses by reason of use or sale
of any such equipment.

The SELLER assumes no liability regarding the improper installation or misapplication of its products.
It is the installer's responsibility to check for proper installation and if in doubt, contact the manufacturer.

LIMITATION OF WARRANTY

Edge Products Inc. (hereafter "SELLER") gives Limited Warranty as to description, quality, merchantability, fitness for any
product’s purpose, productiveness, or any other matter of SELLER's product sold herewith. The SELLER shall be in no way
responsible for the product’s open use and service and the BUYER hereby waives all rights other than those expressly written
herein. This Warranty shall not be extended or varied except by a written instrument signed by SELLER and BUYER.

The Warranty is Limited to
products that are in question of Warranty must be returned shipping prepaid to the SELLER and must be accompanied by a dated
proof of purchase receipt. All Warranty claims are subject to approval by Edge Products Inc.

Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects,
removal, or reinstallation of this product, o r any other contingent expenses.

If the BUYER sends back a failed unit that is out of warranty and chooses to buy a refurbished unit, the refurbished unit will only carry a
60 day warranty. If the BUYER purchases a new unit at a predetermined discounted rate, it will have the standard 1 year warranty.

Under no circumstances will the SELLER be liable for any damage or expenses insured by reason of the use or sale of any such
equipment.

IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT: THE BUYER MAY PROMPTLY
RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, WITH A DATED PROOF OF PURCHASE, TO THE
PLACE OF PURCHASE WITHIN SIXTY (60) DAYS FROM DATE OF PURCHASE FOR A FULL REFUND.

THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS
AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS.

one (1) year from the date of sale and limited solely to the parts contained within the product's kit. All

4

Edge EZ User Manual Edge Products

AFTERMARKET PRODUCTS AND YOUR VEHICLE’S WARRANTY

Many of our customers ask, “Will your product void my vehicle’s manufacturer’s
warranty?” While the answer is straightforward from a legal standpoint, we also
want to educate our customers (and after-market consumers) on some industry
realities and offer some common sense precautions to minimize your risk.

Consumers of aftermarket products are protected by The Federal Magnusson-Moss
Warranty Act. The Act states that if something breaks on your car and you take it
in for warranty repair, the dealer must honor your warranty unless they can prove
that whatever modifications you have added to your car actually caused the
problem. Please keep in mind that towing in anything higher than level two and
hard driving in level three is not recommended.

While as a consumer, you have strong legal protection with regards to your
vehicle’s warranty, there is also a practical reality that different automotive
manufacturers and dealers have greatly varying views on aftermarket products, in
particular those that produce horsepower, such as (performance enhancement)
chips and intakes. There are dealers and manufacturers out there that will use the
presence of a horsepower upgrade to void your vehicle’s warranty. They will do
this regardless of whose box or chip you are using. Any aftermarket company that
does not acknowledge this is misleading you.

The bottom line is that while the law protects the consumer and provides for
enforcement of the warranty, it is very difficult for most people to hire an attorney
and fight a voided warranty. Edge recommends that you always disconnect and

remove your module and monitor when you take your vehicle to a dealer for
warranty work in order not to interfere with Diagnostic equipment.

5