Edgecraft Choice 450 User Manual

Limited Warranty Used with normal care for family

or household purposes only, this EdgeCraft product is
guaranteed against defective material and workman­ship for a period of 1 year from the date of purchase
(“Warranty Period”). We will repair or replace at our
option, any product or part that is defective in material or
workmanship without charge if the product is returned
to us postage prepaid, with dated proof of purchase,
within the Warranty Period. This Limited Warranty does
not cover replacement of abrasive pads necessitated
by use of the product or product damage resulting
from misuse. ALL IMPLIED WARRANTIES, INCLUDING
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
TO THE WARRANTY PERIOD. EDGECRAFT CORPORA­TION SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow
limitations on how long an implied warranty lasts and
some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
Limited Warranty gives you specific legal rights, and
you may also have other rights which vary from state
to state. THIS WARRANTY APPLIES ONLY TO NORMAL
HOUSEHOLD USE OF THIS SHARPENER AND IS VOID
FOR INDUSTRIAL OR COMMERCIAL USE.

EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 USA

[phone] [phone]

Chef’sChoice®, EdgeCraft® and Diamond Hone® are registered
trademarks of EdgeCraft Corporation, Avondale, PA.
© 2011 EdgeCraft Corporation M451900

www.chefschoice.com

Diamond Hone®
Manual Knife Sharpener
2 Stage 450

INSTRUCTIONS

Congratulations!
By selecting the innovative Chef’sChoice
Manual Diamond Hone sharp ener, you will
be able to enjoy the pleasure of knives that
are sharper and stay sharp longer than those
you may have sharpened using conventional
manual sharpeners.

Before you begin . . .

The Chef’sChoice

®

Manual Diamond Hone®
sharpener is “ambidextrous” - extremely
easy to use whether you are a right- or left­handed person. Stages 1 and 2 are marked
on both sides of the sharpener for your
convenience. Place the sharpener on a level
surface about waist high. If right-handed,
arrange the sharpener with the Chef’sChoice
logo facing you. Hold the handle with your
left hand making certain that your left index
finger and thumb remain safely behind the
partitioning wall where the handle attaches
to the sharpening stages. (If left-handed,
see Suggestions.)

CAUTION! Keep all fingers clear of the knife
blade at all times.
Make certain the blade is clean, then proceed
as follows:

1. Sharpening - Stage 1

Holding the knife in the right hand, place the
blade in the first slot (above number 1). Lean
the face of the blade securely against the red
conical roller guides. While maintaining the
blade continuously in good contact with one
or both of the rollers, move the blade back and

®

®

forth smoothly along its entire length, through
Stage 1. You will know the angle is correct if
one or both rollers are moving as you move
the knife. It is unnecessary to lift the blade
after every stroke. Apply only light downward
pressure on the blade and continue the back
and forth action until the blade is sharp. Stage 1
creates a first bevel along the edge. Unless the
knife is very dull, it will take less than 25 full
back-and-forth strokes to sharpen in Stage

1. Do not proceed to Stage 2 until the edge
is very sharp. It should for example, be sharp
enough to cut paper well (see Testing).

2. Honing - Stage 2

To hone the sharpened edge to razor sharp­ness, move the blade to the slot of Stage 2.
This hones by creating a second “micro-bevel”
along the edge. Maintaining the blade in
contact with the red rollers, move the blade
back and forth through this slot. Apply little to
no downward pressure on the blade. If
the blade is sharpened adequately in Stage
1, only a few, (less than 10), strokes will be
necessary in Stage 2.

Testing for sharpness

Try slicing a tomato or other food before you
sharpen your knife. Then test the knife periodi­cally during sharpening until you achieve the
sharpness you desire. Ideally, a well sharpened
knife should slice cleanly through food without
excessive force and without crushing it.

• Totestperiodicallyforsharpness,
hold a sheet of paper by its edge and
carefully slice through it, making sure
you cut a short but safe distance from
your fingers. A sharp blade will cut
smoothly without tearing the paper.

Suggestions

• Ifleft-handed,turnthesharpener

around, hold the handle with your
right hand and the knife with your left,
and follow sharpening and honing
instructions above.

• Withthickblades,itissometimesuseful

after following the instructions for Stage
2, to turn the sharpener around, holding
the handle with the other hand, and
carefully repeat the sharpening process
in Stage 2 with a few back-and-forth
strokes from the other side. Be sure to
maintain blade contact with the rollers.

• Extremelydullknivescanbesharpened

in Stage 1, but many strokes may be
necessary. Stop periodically and check
the blade for sharpness by carefully
cutting paper. Then hone the knife in
Stage 2.

• Avoiddownwardpressureonblade.

Resharpening

Knives can be resharpened by following the
procedure described above, but, in general,
fewer strokes will be required than for the
initial sharpening.

Maintenance

• Theexteriorcanbecleanedwitha

damp, soft cloth.

• Nooilsorotherlubricatingliquidsare

necessary with this sharpener.

• Notforscissors.

EdgeCraft also offers a wide range of popularly
priced powered Chef’sChoice

®

Professional
Sharpeners for those who have many knives
or a wide variety of knives, and for those who
wish to sharpen faster and with less effort
to obtain the ultimate in edge sharpness
and durability.

Chef’sChoice

®

Professional Sharpeners
will safely sharpen either conventionally
edged or serrated blades. The presharpen­ing, sharpening and honing angles are totally
compatible for all models of the Chef’sChoice

®

knife sharpeners.