Edgecore Networks ECW100 User Manual

Handbook

ECW100

In-Wall Access Point

Handbook

ECW100 In-Wall Access Point ENGLISH

Copyright Notice

This document is protected by USA copyright laws and other laws and is the property of

Edgecore Networks Corporation. You may not copy, reproduce, distribute, publish,

display, perform, or modify any part of this publication in any form or by any means

without prior written permission from Edgecore Networks Corporation. You may not alter

or remove any copyright or other notice from copies of the content. All other brand

and product names are claimed or registered marks of their respective companies or

organizations.

All rights reserved.

i

Handbook

ECW100 In-Wall Access Point ENGLISH

FCC CAUTION

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.

For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range.
※ FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the

potential for harmful interference to co-channel Mobile Satellite systems.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ii

Handbook

Frequency range (MHz)

Max. transmit power (dBm)

2412-2472

19.26 dBm

5150-5250

18.22 dBm

AT

BE

BG

HR

CY

CZ

DK

EE

FI

FR

DE

EL

HU

IE

IT

LV

LT

LU

MT

NL

PL

PT

RO

SK

SI

ES

SE

UK

Input Power

Power from PoE: IEEE802.3af

Operation Temperature

0℃ (32℉) to 40℃ (104℉)

ECW100 In-Wall Access Point ENGLISH

CE CAUTION

Hereby, Edgecore Networks Corporation declares that the radio equipment type ECW100 is in
compliance with Directive
2014/53/EU.

Frequency Range and Transmit Power

This device is restricted to indoor use.

Model - ECW100

The device has been tested and passed the requirements of the following standards, and hence fulfills the
EMC and safety requirements of RED within the CE marking requirement.

 Radio: EN 300 328 V2.1.1, EN 301 893 V2.1.1
 EMC: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0
 EMC: EN 55032:2015 + AC:2016 Class B, EN 55024 : + A1 + A2 including the followings:

EN 61000-3-2, EN 61000-3-3,
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Safety: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Caution

 This declaration is only valid for configurations (combinations of software, firmware, and hardware)

provided and supported by Edgecore Networks Corporation. The use of software or firmware not
provided and supported by Edgecore Networks Corporation may result in the equipment no longer being
compliant with the regulatory requirements.

 Requirements in

AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE
/CH/UK/HR. 5150MHz ~ 5350MHz is for indoor use only.

 In order to ensure compliance with the exposure recommendations to electromagnetic fields, the device

should be used at a minimum distance of 20cm from the body.

iii

Taiwan NCC Statement

根據 NCC 低功率電波輻射性電機管理辦法 規定:

第十二條

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、

加大功率或變更原設計之特性及功能。

第十四條

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即
停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通
信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

減少電磁波影響，請妥適使用

Handbook

ECW100 In-Wall Access Point ENGLISH

[警語]「電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為 0.124 mW/cm2」

iv

Handbook

Preface

Package Contents

The Edgecore ECW100 Enterprise In-Wall Access
Point is a dual radio Wi-Fi IEEE 802.11b/g/n +

a/n/ac 2 X 2 MIMO access point. With a simplistic
yet sleek design, it can easily blend into any working
or living environment.

The compact ECW100 lays snug in a standard wall
outlet box. Its front panel features power and LAN
LED status indicators, one RJ45 LAN port, and one
RJ11 pass-through port. With both Wi-Fi and
Ethernet interfaces, it can provide wireless access
and wired LAN access simultaneously. The RJ11
ports can be used for phone connection without the
need for additional outlets.

When ECW100 coupled with the Edgecore
Controller, the ECW100 supports tunnel-based AP
management and meets all the standards
demanded in enterprise applications, including
business-grade security (802.1X, WPA and WPA2).
Multiple ESSIDs with VLAN tags can also be
configured for traffic control. In addition, it features
centralized WLAN management, which allows the
enterprises and organizations to support a wide
array of value-added applications, such as load
balancing, bandwidth control, and access control.

ECW100’s high performance, security and optimal
invisibility make it a perfect choice of wireless
connectivity for your business.

1. Edgecore ECW100 (US / EU Type) x 1

2. Cover Plate (US / EU Type) x 1

3. Screws x 2

4. Quick Installation Guide (QIG) x 1

It is recommended to keep the original

packing material for possible future shipment
when repair or maintenance is required. Any
returned product should be packed in its
original packaging to prevent damage during
delivery.

ECW100 In-Wall Access Point ENGLISH

1