Page 1
ECWO5213-L
Access Point
Page 2
Quick Installation Guide
i
ECWO5213-L Access Point ENGLISH
Copyright Notice
This document is protected by USA copyright laws and other laws. Besides, the
document is the property of Edgecore Networks Corporation. You may not copy,
reproduce, distribute, publish, display, perform, or modify any part of this publication in
any form or by any means without prior written permission from Edgecore Networks
Corporation. You may not alter or remove any copyright or other notice from copies of
the content. All other brand and product names are claimed or registered marks of their
respective companies or organizations.
All rights reserved.
Page 3
Quick Installation Guide
ii
ECWO5213-L Access Point ENGLISH
FCC CAUTION
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 31 cm between the radiator & your body.
Professional installation instruction
1. Installation personal
This product is designed for specific application and needs to be installed by a qualified personal who has
RF and related rule knowledge. The general user shall not attempt to install or change the setting.
2. Installation location
The product shall be installed at a location where the radiating antenna can be kept 31 cm from nearby
person in normal operation condition to meet regulatory RF exposure requirement.
3. External antenna
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may
produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC
limit and is prohibited. The antenna must be installed completely perpendicular to the horizon for
compliance with FCC Rule Part 15.407(a)(1)(i).
4. Installation procedure
Please refer the handbook for the detail.
Page 4
Quick Installation Guide
iii
2.4GHz antenna spec.
Antenna No.
Frequency (MHz)
Peak Gain (dBi)
Antenna Type
Connecter Type
1
2400~2500
10.9
PIFA
IPEX
2
2400~2500
11.4
5GHz antenna spec.
Antenna No.
Frequency (MHz)
Peak Gain (dBi)
Antenna Type
Connecter Type
1
5150~5825
10.5
PIFA
IPEX
2
5150~5825
10.2
Frequency range (MHz)
Max. transmit power (dBm)
2412-2472
23 dBm
5150-5350
23 dBm
5500-5700
23 dBm
AT
BE
BG
HR
CY
CZ
DK
EE
FI
FR
DE
EL
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
RO
SK
SI
ES
SE
UK
Input Power
Power from PoE: IEEE802.3at
Operation Temperature
-20℃ (-4℉) to 65℃ (149℉)
ECWO5213-L Access Point ENGLISH
5. Warning
Please carefully select the installation position and make sure that the final output power does not exceed
the limit set force in relevant rules. The violation of the rule could lead to serious federal penalty.
The antenna gain, antenna type and output power that can be used for the device and the info listed below are
correct and represent the product.
CE CAUTION
Hereby, Edgecore Networks Corporation. declares that the radio equipment type ECWO5213-L is in
compliance with Directive
2014/53/EU.
Frequency Range and Transmit Power
Page 5
Quick Installation Guide
iv
根據 NCC 低功率電波輻射性電機管理辦法 規定:
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或
變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善
至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受
合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
ECWO5213-L Access Point ENGLISH
Model – ECWO5213-L
The device has been tested and passed the requirements of the following standards, and hence fulfills the
EMC and safety requirements of RED within the CE marking requirement.
Radio: EN 300 328 V2.1.1, EN 301 893 V2.1.1
EMC: EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1
EMC: EN 55032:2015 + AC:2016 Class B, EN 55024:2010 + A1:2015 including the followings:
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
Safety: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
Caution
This declaration is only valid for configurations (combinations of software, firmware, and hardware)
provided and supported by Edgecore Networks Corporation. The use of software or firmware not
provided and supported by Edgecore Networks Corporation. may result in the equipment no longer being
compliant with the regulatory requirements.
Requirements in
AT/BE/BG/CZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE
/CH/UK/HR.
In order to ensure compliance with the exposure recommendations to electromagnetic fields, the device
should be used at a minimum distance of 20cm from the body.
Taiwan NCC Statement
減少電磁波影響，請妥適使用
Page 6
Quick Installation Guide
1
Preface
Package Contents
Edgecore ECWO5213-L Outdoor Access Point is an
enterprise-grade dual radio 802.11 a/b/g/n + ac
Wave 2 Access Point with the best performance for
business and industrial applications. Featuring two
2x2 MIMO radios, the ECWO5213-L can
simultaneously support up to 300 and 867 Mbps
data rates in the 2.4 and 5 GHz bands respectively.
ECWO5213-L is compliant with the latest industrial
wireless security standards such as 802.1X and
Wi-Fi Protected Access (WPA and WPA2) which are
required in the tightly secured enterprise network
environments. Furthermore, ECWO5213-L also
features multiple ESSIDs with VLAN tags and
multiple Virtual APs; great for enterprise
applications, such as separating traffic from different
departments using different ESSIDs.
As an Outdoor Access Point, ECWO5213-L
supports wall mounting and poll mounting for
different deployment environments. Besides
ECWO5213-L’s PoE uplink port is able to receive
power from Power over Ethernet (PoE) sourcing
devices, its LAN port also supports PoE with
802.11at standard which make network deployment
more convenient and easier.
This Quick Installation Guide provides instructions
and reference materials to get you started with
Edgecore ECWO5213-L.
1. Edgecore ECWO5213-L x 1
2. Quick Installation Guide (QIG) x 1
3. Metal Strip x 2
It is recommended to keep the original
packing material for possible future shipment
when repair or maintenance is required. Any
returned product should be packed in its
original packaging to prevent damage during
delivery.
ECWO5213-L Access Point ENGLISH
Page 7
Quick Installation Guide
2
System Overview
1
Power LED
ECWO5213-L status. The Power LED will start blinking when the
ECWO5213-L is booting. After finishing booting, the Power LED will always
on.
2
LAN1 LED
Uplink status. The LAN1 LED will light up when there is traffic passing through
the LAN1 port.
3
LAN2 LED
LAN status. The LAN LED will light up when there is traffic passing through the
LAN port.
4
2.4G LED
2.4G Wi-Fi status. The 2.4G LED will blink when there is 2.4G traffic.
5
5G LED
5G Wi-Fi status. The 5G LED will blink when there is 5G traffic.
ECWO5213-L Access Point ENGLISH
ECWO5213-L Side ECWO5213-L Back
Page 8
Quick Installation Guide
3
6
LAN1 (PoE) Port
Offers uplink connection. This port can be used to connect to a controller,
gateway, or directly to the Internet. 802.3at PoE is also supported.
7
Ventilation Valve
Due to extreme weather conditions, water vapor in the ECWO5213-L may
condense. The valve allows ventilation to prevent moisture buildup within the
ECWO5213-L.
8
LAN2 Port
The ports for connections with LAN side devices.
9
Wall Mounting Holes
For hanging ECWO5213-L.
10
Pole Mounting Gap
For mounting ECWO5213-L.
11
Ground Connector
For connecting the ground wire
ECWO5213-L Access Point ENGLISH
Page 9
Quick Installation Guide
4
Hardware Installation
ECWO5213-L Access Point ENGLISH
Please follow the steps mentioned below to install the hardware of ECWO5213-L:
1. Place the ECWO5213-L at the best location.
The best location for ECWO5213-L is usually at the center of your intended wireless network.
Wall mount
1. Secure screws on the wall.
2. Hang ECWO5213-L on the wall by pole mounting holes.
Page 10
Quick Installation Guide
5
check the LED indicator of the respective network devices.
ECWO5213-L Access Point ENGLISH
Pole mount
1. Insert the metal strips through the pole mounting gap.
2. Join the two ends of the metal strips and adjust the length for tight fitting around the pole.
2. Connect the ECWO5213-L to your network device.
Connect one end of the Ethernet cable to the LAN1 (PoE) port of ECWO5213-L and the other end of the
cable to a switch, a router, or a hub. ECWO5213-L is then connected to your existing wired LAN network.
3. Power on the ECWO5213-L.
ECWO5213-L LAN1 (PoE) port is capable of receiving DC currents. Connect an IEEE 802.3at-compliant PSE
device (e.g. a PoE-switch) to the LAN1 (PoE) port of ECWO5213-L with the Ethernet cable.
Now, the Hardware Installation is complete.
Page 11
Quick Installation Guide
6
Getting Started
IP Address
192.168.1.10
Subnet Mask
255.255.255.0
ECWO5213-L Access Point ENGLISH
Edgecore ECWO5213-L supports web-based configuration. Upon the completion of hardware installation,
Access Point can be configured through a PC by using its web browser such as Mozilla Firefox 2.0 or Internet
Explorer version 6.0 and above.
The default values of LAN IP address and subnet mask of ECWO5213-L are:
Steps:
1. To access the web management interface, connect the administrator PC to the LAN port of ECWO5213-L
via an Ethernet cable. Then, set a static IP address on the same subnet mask as ECWO5213-L in TCP/IP
of your PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of ECWO5213-L (http://192.168.1.10) at
the address field, and then press Enter.
Example of entering ECWO5213-L’s default IP Address via a web browser
3. The following Admin Login Page will appear. Enter “admin” for both the Username and Password fields,
and then click Login.
Administrator Login Page
Page 12
Quick Installation Guide
7
After ECWO5213-L’s network configuration is completed, please remember to change the IP Address
of your PC Connection Properties back to its original settings in order to ensure that your PC functions
properly in its real network environments.
It is strongly recommended to make a backup copy of the configuration settings.
For further configuration and backup information, please refer to the User’s Manual.
ECWO5213-L Access Point ENGLISH
4. After a successful login into ECWO5213-L’s Web user interface (Web UI), a System Overview page of
web management interface will appear, as depicted below.
The Web Management Interface - System Overview Page
Congratulations!
Now, Edgecore ECWO5213-L is installed and configured successfully.
P/N: V34320181207
Loading...