
CONTENTS
INTRODUCTION 3
HOW TO CHARGE YOUR VT-50 / VT-50-XLR 4
HOW TO USE YOUR VT-50 / VT-50-XLR 6
HOW TO POWER UP YOUR VT-50 / VT-50-XLR 6
IF YOUR VT-50 / VT-50-XLR IS CONFIGURED TO LIVESTREAM 7
IF YOUR VT-50 / VT-50-XLR IS NOT CONFIGURED TO LIVESTREAM 7
RECORDING WITH EXTERNAL POWER PACK (VT-50-XLR ONLY) 8
HOW TO STOP RECORDING 9
WEARING YOUR VT-50 / VT-50-XLR 9
ROTATABLE CLIPS 10
LANYARDS 11
WEATHER RESISTANT SLEEVE 12
CARE FOR YOUR VIDEOTAG PRODUCT 13
REGULATORY INFORMATION 14
VT-50 & VT-50-XLR - Quickstart Guide - ED-006-007-24
2

INTRODUCTION
Thank you for choosing the VideoTag VT-50 / VT-50-XLR. This simple guide will lead you through the
set up and use of your VT-50 / VT-50-XLR.
In order to use your VT-50 / VT-50-XLR, you must have access to our VideoManager Software. This
can be purchased as a per camera licence, or you can subscribe to your Cloud Service.
The VT-50 / VT-50-XLR is designed to function on standby for up to six months. Therefore, it is
necessary to fully charge the device before rst use.
Speaker
Record Button
& LED
Microphone
Clip
Tether Point
Lens
VT-50 & VT-50-XLR - Quickstart Guide - ED-006-007-24
3

HOW TO CHARGE YOUR VT-50 / VT-50-XLR
To charge, you will need either the USB charging cable (supplied in this kit), or the VT-50 / VT-50-XLR
variant of the 14 Slot Dock (VT-50-DOCK14).
USB Charging Cable VT-50 Variant - 14 Slot Dock
(VT-50-DOCK14)
VT-50 & VT-50-XLR - Quickstart Guide - ED-006-007-24
4

The button on the top of the device will pulse green when charging and pulse blue/green when
charging and connected to Wi-Fi.
If the VT-50 / VT-50-XLR is not congured to connect to Wi-Fi while docking, the LED will pulse green
while charging, and go out once fully charged.
If your VT-50 / VT-50-XLR has not already been congured by your system administrator, please see
the Edesix Admin Guide for instructions on how to congure your device.
Charging
(Pulsing green)
Charging & Connected to Wi-Fi
(Pulsing blue/green)
VT-50 & VT-50-XLR - Quickstart Guide - ED-006-007-24
Fully Charged
(No LED)
5