Edenpure AIR A5862 User Manual

CUSTOMER SERVICE

For repairs or service, please visit your place of purchase, call 1-800-225-6595
or visit www.edenpuresupport.com.

Follow us/Like us

facebook.com/ Instagram.com/ twitter.com/ pinterest.com/
Edenpure edenpureproducts edenpure_ Edenpure

WARNING

ANY REQUIRED SERVICE OTHER THAN ROUTINE CLEANING SHOULD ONLY

BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE

©2018 EdenPURE® I-5522 BR11746R-1

SilentPURE Air

Model: A5862

IMPORTANT
SAVE THESE
INSTRUCTIONS

To ensure you get the best results from
your Air Purifi er, please read this manual
fi rst and keep it for future reference. For
additional information, please contact
your place of purchase or call

1-800-225-6595

Thank you for choosing EdenPURE

™

®

IMPORTANT INSTRUCTIONS

WARNING

IMPROPER USE OF THIS AIR PURIFIER COULD RESULT IN RISK OF FIRE, ELECTRIC,

SHOCK AND INJURY TO PERSONS

WARNING

ANY REQUIRED SERVICE OTHER THAN FILTER ROUTINE CLEANING SHOULD ONLY BE

PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE AND ANY

OTHER REPAIRS ATTEMPTED BY ANYONE OTHER THAN AN AUTHORIZED

SERVICE REPRESENTATIVE WILL VOID THE WARRANTY.

FOR AUTHORIZED SERVICE, CALL 1-800-225-6595 OR VISIT

WWW.EDENPURESUPPORT.COM

WARNING

RISK OF ELECTRICAL SHOCK DO NOT OPEN

NO USER-SERVICEABLE PARTS INSIDE

READ AND SAVE THESE INSTRUCTIONS
BEFORE USING THIS AIR PURIFIER

When using electrical appliances, basic safety precautions should

always be followed to reduce the risk of re, electric shock, and injury to

persons, including the following:

•Always operate the product from a power source of the same voltage,
frequency and rating as indicated on the product identication plate.

•Remove the unit from its packaging and check to make sure it is in good
condition before using.

•Do not let children play with parts of the packaging (such as plastic bags).

•Close supervision is necessary when the product is used by or near children

or persons with reduced physical, sensory or mental capabilities. Do not allow
children to use it as a toy.

•Do not operate any product with a damaged cord or plug, or aer the
product malfunctions, or is dropped or appears damaged in any way. Contact
Customer Service for repair or replacement.

•Before unplugging the power cord, be sure to turn the power o. When
touching the unit, be sure your hands are dry to prevent electrical shock.

•Never install the unit where it is exposed to direct sunlight, excessive
moisture/rain, dust and lack of ventilation near any heat sources.

•Avoid making contact with moving parts. Never insert ngers, pencils or
any other objects through the guards whenever the power plug is connected,
especially while the unit is working.

•Always place the unit on a stable, level surface when operating to prevent the

4. At the very front of the unit is a Permanent Ozone Filter that converts
ozone to ultra-pure, breathable oxygen.

Puried air is silently diused into your environment, helping you sleep
restfully and breathe with condence.

TROUBLESHOOTING

You are not sure if your SilentPURE Air™ is running.

1. Check that your power supply is plugged into an active circuit and has a

green ON light. If there is no green light, call Service.

2. Check that your wall adapter is securely plugged into the unit.

3. Check that the ON/OFF switch is ON (l).

4. Check that the blue light is ON.

5. If all of the above checks out, but there is no power to the unit, call Service.

Your unit is crackling, ticking or buzzing.

1. Turn the power o and invert your unit 6 times or more to perform internal

cleaning.

2. Remove both lters and vacuum well. Sweep your vacuum from le to right

and up and down.

3. DO NOT vacuum the front grill. Only wipe with a damp cloth.

4. Still noisy? Try a dierent wall outlet (occasionally this matters).

There is a slight static discharge.

Reduce static build-up by making sure your unit is at least 12" from any
computer, electronics or metal.

My unit shut o.

Turn the On/O switch to OFF (O). Invert the unit 6 times or more, allowing
the bead-cleaning system to scrape the particulate from the air motor wires, and
then turn back ON (l). It is important to perform a bead-cleaning about once a
week.

SPECIFICATIONS

Model: A5862
Power Output: 26 V DC
Power Input: 18V DC 2A Max.
Power Usage: 36 Watts Max.
Size: 14" H x 11" W x 5 ½" D
Weight: 5 ½ lbs.

Unit Safety Markings:

Patents: