Eden Bath EBFC005WBN Installation Manual

Wall mounted basin mixer

EB_FC005W

Installation Instruction

Please read this instruction carefully to avoid any
difficulty during installation.

N o .

01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

Components List

Component

Plastic sleeve
Main body
Cross-head screw
O-ring
Sealing strip
Plate
Cover
Ceramic cartridge
Cross-head screw
Cartridge fastener
Cap
Handle cover
Female allen screw
Index
Handle
Safe cover for main body
Safe cover for diverter
Aerator core
Flat washer
Spout
Plate
Sealing strip
O-ring
Stopper

Quantity

3
1
3
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Installation Step

Installation Fig

5

2

6

7

1

3

4

See the fig for the position of the valve and inlet pipes.

Test:

Open the supply pipes, close the ceramic cartridge and check any leakage;
open the ceramic cartridge and check the smooth water flow. Having tested,
install the valve to the wall, take the safe cover apart and install the plate
and handle.

1/2-14NPT

1/2-14NPT

Flow rate Curves

L/minL/min

30 30

2525

2020

1515

1010

5 5

00

11 1.51.5 22 2.52.5

0.50.5

3.53.5

33

Test pressure:

1.6MPa (16bar)

Flow pressure:

0.05MPa

Min

1.60MPa

Max

BarBar

Recommended pressure:

0.1MPa to 0.8MPa (1 to 8 bar)

Note

1.Ensure proper cleaning of the water supply pipe before
installation to avoid any jammed.

2.The cold-water supply must be connected on the right and
the hot-water supply must be connected to the left.

3.Check the installation dimensions according to the Figure and
ensure it is installed correctly.

4.Hot-water inlet temperature must not be over 80 C.

o