
Nemesis NSP Series
Owners Manual
Bass Guitar Speaker Enclosures
For All NSP Speakers
Covering Models
NSP2104(E), NSP2108(8), NSP4104(E),
NSP4108(E), NSP115(E), NSP212(E),
NSP810(E)
© 3/5/2005 U. S. Music Corp.

Nemesis Series Bass Enclosure NSP Products
Owner’s Manual 3/15/05
Thank you for your purchase of a Nemesis Series loudspeaker enclosure.
This cabinet has been designed and constructed to give you years of trouble
free service. The unique composite construction of your NSP Series speaker
enclosure is made from recycled cellulose fiber, which is both stronger and
lighter than traditional plywood enclosures, as well as being environmentally
friendly.
Please take the time to review this manual and to send in your warranty
registration card.
CAUTION!
Your ears are your most important piece of equipment. Unfortunately, they
cannot be replaced as easily as your other gear. Please take the following
warning seriously.
This product, when used in combination with amplification and/or additional
loudspeakers may be capable of producing sound levels that could cause
permanent hearing loss. DO NOT operate at high volume levels or at a
level that is uncomfortable. If you experience any discomfort or ringing in
the ears or suspect hearing loss, you should consult an audiologist.
BASIC CONNECTIONS AND OPERATION
There are three speaker connections on the connection panel: two standard
1/4 inch jacks and one NL4 connector. These connections are all wired
together in parallel. This means that any of the connections can accept the
input from your amplifier and that the remaining two connections can be
used to connect to additional speaker cabinets if desired. NEVER
CONNECT TWO AMPLIFIERS TO ONE CABINET.
The level of the tweeter is set to flat in the enclosure. It is not user
adjustable.
You should make all your connections before turning your amplifier on.
Standard 1/4 inch plugs are less than ideal in their ability to transfer the
signal from your amplifier. This is due to the limited amount of actual