Edelbrock Water Pump Gasket Kit 7523, Water Pump Gasket Kit 7528, Water Pump Gasket Kit 7524, Water Pump Gasket Kit 7522, Water Pump Gasket Kit 7527 User Manual
Catalog #7521, 7522, 7523, 7524, 7527, 7528
Rev. 11/07 - AJ/mc
©2007 Edelbrock Corporation
Brochure #63-7251
WATER PUMP REPLACEMENT GASKET KIT
For Edelbrock Water Pumps ONLY
Catalog #7251, 7252, 7253, 7254, 7257, 7258
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this
installation. Most installations can be accomplished with common tools
and procedures. However, you should be familiar with and comfortable
working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a
qualified mechanic. If you have any questions, please call our
Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific
Standard Time, Monday through Friday or e-mail us at
Edelbrock@Edelbrock.com
.
IMPORTANT NOTE: Proper installation is the responsibility of
the installer. Improper installation will void your warranty and
may result in poor performance and engine or vehicle damage.
DESCRIPTION: This kit includes the gasket(s) necessary for the
reinstallation of your Edelbrock high performance water pump. Each of
these kits has been designed to work with several pumps and will
include at least one extra gasket that will not be needed for a given
application. Compare the new gaskets to the mounting flange of the
block, timing cover, or pump to determine the correct application, or
contact our technical support division for further assistance.
INSTALLATION NOTES
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Backing plates should only be tightened to 8 ft/lbs to avoid potential
damage to the pump housing. A thin layer of Ultra Blue RTV silicone
sealant can be applied to both sides of the water pump gaskets to
ensure a proper seal is achieved, but is not strictly necessary.
Gasket Kit # Engine Family Compatible Pumps
7251 Small Block Chevy
8810, 8811, 8812, 8815, 8820,
8821, 8822, 8825, 8881, 8882,
8891, 8892, 88102, 88104, 88112,
88114, 88812, 88814
7252 Big Block Chevy
8850, 8851, 8852, 8853, 8854,
8858, 8860, 8861, 8862, 8863,
8864, 88502, 88504, 88512, 88514
7253
Small Block Ford
(standard rotation)
8841, 8842, 8843, 8844, 8846,
8847, 8848, 8849, 88412, 88414
7254
Small Block Ford
(reverse rotation)
8045, 8046, 8840, 8845
7257
Big & Small Block
Chrysler
8814, 8824, 8877, 8887
7258 FE & Big Block Ford 8805, 8835, 8866, 8876
Catalog #7521, 7522, 7523, 7524, 7527, 7528
Rev. 11/07 - AJ/mc
©2007 Edelbrock Corporation
Brochure #63-7251
WATER PUMP REPLACEMENT GASKET KIT
For Edelbrock Water Pumps ONLY
Catalog #7251, 7252, 7253, 7254, 7257, 7258
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this
installation. Most installations can be accomplished with common tools
and procedures. However, you should be familiar with and comfortable
working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a
qualified mechanic. If you have any questions, please call our
Technical Hotline at: 1-800-416-8628, 7:00 am - 5:00 pm, Pacific
Standard Time, Monday through Friday or e-mail us at
Edelbrock@Edelbrock.com
.
IMPORTANT NOTE: Proper installation is the responsibility of
the installer. Improper installation will void your warranty and
may result in poor performance and engine or vehicle damage.
DESCRIPTION: This kit includes the gasket(s) necessary for the
reinstallation of your Edelbrock high performance water pump. Each of
these kits has been designed to work with several pumps and will
include at least one extra gasket that will not be needed for a given
application. Compare the new gaskets to the mounting flange of the
block, timing cover, or pump to determine the correct application, or
contact our technical support division for further assistance.
INSTALLATION NOTES
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 1-800-416-8628 • E-Mail: Edelbrock@Edelbrock.com
Backing plates should only be tightened to 8 ft/lbs to avoid potential
damage to the pump housing. A thin layer of Ultra Blue RTV silicone
sealant can be applied to both sides of the water pump gaskets to
ensure a proper seal is achieved, but is not strictly necessary.
Gasket Kit # Engine Family Compatible Pumps
7251 Small Block Chevy
8810, 8811, 8812, 8815, 8820,
8821, 8822, 8825, 8881, 8882,
8891, 8892, 88102, 88104, 88112,
88114, 88812, 88814
7252 Big Block Chevy
8850, 8851, 8852, 8853, 8854,
8858, 8860, 8861, 8862, 8863,
8864, 88502, 88504, 88512, 88514
7253
Small Block Ford
(standard rotation)
8841, 8842, 8843, 8844, 8846,
8847, 8848, 8849, 88412, 88414
7254
Small Block Ford
(reverse rotation)
8045, 8046, 8840, 8845
7257
Big & Small Block
Chrysler
8814, 8824, 8877, 8887
7258 FE & Big Block Ford 8805, 8835, 8866, 8876
®
®
Loading...