Edelbrock 25-9493, 25-9494, Victor, 25-9492 User Manual

EDELBROCK VICTOR SERIES DRAG RACE HEADERS

Catalog #6551

KIT CONTENTS

Edelbrock Corporation, 2700 California Street, Torrance, CA 90503

Toll-Free Tech Line: 1-800-416-8628

Office: 310-781-2222

Tech E-Mail: Edelbrock@Edelbrock.com

Note: Your Edelbrock Victor Series Race Headers include stainless steel evacuation tubes, O2 sensor bungs and collector

mounting tabs to be installed, if needed. Collector mounting tabs should be installed after primary tube tuning has been completed. Evacuation tubes can be positioned on the collector where desired for best fit and hose routing. See the above diagram for recommended installation.

As the exhaust flow passes by the tube, it creates a low pressure area on the backside, which translate into vacuum.

EXHAUST FLOW

Qty. Part # Description

❑ 1 25-9492 Left Side Header

❑ 1 25-9493 Right Side Header

❑ 2 25-9494 Slip-on Merge Collector

❑ 16 36-0710 3/8” - 16 x 1” Header Bolts (Header Flange)

❑ 2 52-9711 O2 Sensor Bungs (SS)

❑ 2 54-6550 Header Port Flange Gaskets (Fel-Pro)

❑ 4 60-8541 5/16”-18 Grade C Lock Nuts (Collector)

❑ 4 68-6550 5/16”-18 x 1-1/2” Grade 8 Hex Bolt (Collector)

❑ 2 79-9719 Evacuation Tubes (SS)

❑ 8 79-9720 Collector Mounting Tabs (SS)

❑ 8 82-3600 5/16” AN Washers (Collector)

❑ 16 82-5590 3/8” Split Lock Washers (Header Flange)