Edelbrock Nitrous Refill Station 78000 Installation Instructions Manual

EDELBROCK

NITROUS REFILL STATION

#78000

Edelbrock Nitrous Systems

2700 California Street

Torrance, California 90503

Tech Line [phone]

Tech Fax [phone]

Rev. 12/00

Thank You….
…for purchasing an Edelbrock Nitrous Oxide Refill Station.

Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the
market today. With the use of nitrous oxide come some important safety co nsiderations. This manual has been
written to help you during the installation and use of your Edelbrock Refill Station. Please read it completely before
you use your system. Please pay close attention to the safety information at the beginning of each section.

Please take the time to read and understand the following….

By setting up your Edelbrock Refill Station , you indicate you have read this document and you agree with the terms
stated below:

It is the responsibility of the purchaser to follow all installation instruction guidelines and safety
procedures supplied with the Edelbrock Refill Station.

Edelbrock Corporation assumes no responsibility for damages occurring from misuse, abuse, improper installation,
improper operation, lack of responsible care, or all previously-stated reasons resulting from incompatibility with
other manufacturer’s products and/or systems.

Edelbrock Corporation neither recommends nor condones the use of products manufactured or sold by Edelbrock
Corporation for use on vehicles, which may be driven on public roads or highways, and assumes no responsibility for
damages incurred by such use.

Edelbrock Corporation assumes no responsibility for damages incurred by the use of products manufactured or sold
by Edelbrock Corporation on vehicles used for competition or racing.

Edelbrock General Warranty

It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable.
Edelbrock warrants each new product, except Performer Series Carburetors, Race Division Parts, Tubular Exhaust
Systems, RPM Series Mufflers, Cat- Back Systems and Performer IAS Shock Absorbers which are warranted
separately, to be free from defects in both workmanship and material for a period of one (1) year from the date of
purchase, provided that the product is properly installed, subjected to normal use and service and that the produ ct
is not modified or changed in any way, negligence by customer or installer or used for racing or competition
purposes.

Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers
who believe the y have a defective product should either return it to the dealer from which it was purchased or ship
it directly to Edelbrock along with proof of purchase and a complete description of the problem. The product must
be returned freight pre-paid. If a thorough inspection of the product by the factory indicates defects in
workmanship or material, our sole obligation shall be to repair or replace the product. Warranty covers only the
product itself and not the cost of installation or removal.

Edelbrock Corporation shall not be liable for any and all consequential damages occasioned by the
breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the
product sold.

If you have any questions regarding a product or installation, please contact our Technical
Department, toll free at 1-800-416- 8628 from 7:00am to 5:00pm PST, Monday through Friday.

Thank you again for choosing Edelbrock Nitrous Systems.

Page 1

What is Nitrous Oxide ?

Nitrous Oxide is a cryogenic gas composed of nitrogen and oxygen molecules. It is stored as a “gas over a liquid”
which means that both liquid and gaseous nitrous oxide is delivered into your engine. It is 36% oxygen by weight,
which is what produces the added horsepower. By injecting more oxygen (and a corresponding fuel signal), we
create the additional power much like a supercharger or a turbocharger does.

Nitrous Oxide is considered an “oxidizer” and not a fuel. Nitrous oxide is non-flammable by itself. Because nitrous
oxide is a cryogenic, the same safety methods in handling dry ice apply to nitrous. Direct contact with the skin will
cause a burn similar to contact with dry ice. The exception in using nitrous oxide comes from increased breathing
hazards associated with the gaseous properties of nitrous oxide.

Nitrous Oxide is offered for sale in two common grades, which are U.S.P., and Nytrous Plus. U.S.P. nitrous oxide is
medical grade nitrous oxide. Its common use is dental and veterinary anesthesia as well as use as a propellant in
food such as canned whip cream. U.S.P. is not available to the public and would provide no advantage in the making
of horsepower over the automotive grade nitrous oxide.

Nytrous Plus was specifically designed for automotive consumption and differs from U.S.P. in that it contains trace
amounts of sulfur dioxide (100 parts per million or “PPM”) added to prevent substance abuse. The Sulfur Dioxide is
an irritant to all of your breathing passageways and will cause sore throats and sore nasal passages. Nytrous Plus
was specifically created for automotive applications and is available for sale to the public at many speed shops
across the USA.

þþ Safety Steps For Working With Nitrous Oxide

1. Never inhale Nytrous Plus (Nitrous oxide (N2O) for vehicular use) as continued exposure can cause death.
Nytrous Plus has a maximum of 100 parts per million (ppm) of sulfur dioxide and will cause irritation to nose
and throat passageways.

2. When working around any high-pressure gas including nitrous oxide, take all precautions to ensure that
exposure to nitrous oxide is minimized.

3. Do not vent nitrous oxide to atmosphere in confined spaces. Only vent nitrous oxide in well- ventilated and
open areas.

4. Liquid nitro us oxide can cause burns to human flesh so protect all skin in and around your hands, arms
and face. Wear safety glasses and rubber gloves to protect from liquid nitrous oxide splatter.

5. When venting down the nitrous system, vent the line down closest to the nitrous bottle.

6. Do not use any form of Teflon tape as sealant on fitting connections. Use only Teflon paste.

7. When washing components, ensure the clean components are completely dry, free of oils, and solvents.
Failure to remove all liquids could cause component or system failure.

8. Always turn the bottle off before making any repairs to the nitrous delivery system.

9. To safely release nitrous oxide in a pressurized line:

a. Position vehicle in a well- ventilated, unconfined space.
b. Turn bottle off.
c. Slowly loosen the nitrous feed line at the bottle until you hear a light hissing noise.
d. Allow the entire nitrous pressure to vent from the line.
e. Perform your work on the system.
f. Tighten the nitrous line to the bottle.
g. Slowly open the nitrous bottle valve, listening for leaks.
h. Perform leak checks on all a ffected fittings and the bottle fitting.

Page 2