Edelbrock 9637, 9633, 9631, 9630, 9629 user manual

HARDENED PUSHRODS

®

• PLEASE study these instructions carefully before installing your new pushrods. If you have any questions or problems, do
not hesitate to contact our Technical Hotline at: 1-800-416-8628, 7 am - 5 pm, Monday-Friday, Pacific Standard Time
or e-mail us at edelbrock.edelbrock.com.

• DESCRIPTIONS
#9629 - For Small-Block Chevrolet V8s, 5/16" diameter (+.100” Longer Than Stock)
#9630 - For Small-Block Chevrolet V8s, 5/16" diameter (standard length)
#9631 - For Big-Block Chevrolet V8s, 5/16" diameter (standard length)
#9632 - For Small-Block Ford V8s, 5/16" diameter (standard length)
#9633 - For 351 M/400 Ford V8s, 5/16" diameter (standard length)
#9637 - For 343-401 AMC V8s, 5/16” diameter (standard length)
#9638 - For Chrysler Magnum 5.2L & 5.9L V8s, 5/16” diameter (standard length)

• PUSHRODS: These pushrods are manufactured from case hardened tubing. They are designed to be used in engines with
or without hardened steel guideplates. Guideplate slots must be correct width for 5/16" pushrods. Lube all parts thoroughly
upon installation. Use moly lube (preferred) or motor oil.

CATALOG #9629, #9630, #9631, #9632, #9633, #9637, & 9638

(See Description Below)

INSTRUCTIONS

©2004 Edelbrock Corporation
Rev. 8/04

Hardened Pushrods

Brochure #63-0098