Edelbrock 8031, 8032 user manual
UNIVERSAL CHEVROLET MOUNTING BRACKETS
PART #8031 AND #8032
INSTALLATION INSTRUCTIONS
PLEASEstudy these instructions completely and thoroughly before installing your new throttle bracket. If you have any questions or problems,
contact our Technical Hotline at: 1-800-416-8628, 7 am - 5 pm Monday-Friday, Pacific Standard Time or e-mail us at
edelbrock@edelbrock.com.
KIT CONTENTS
Qty. Description
1 Throttle Bracket - Universal Chevy, Top
1 Throttle Bracket - Standard Chevy, Base
2 ¼ - 20 lock nut
2 ¼ - 20 x 5/8" bolt
4 ¼" washer AN
DESCRIPTION
PART #8031
PART #8032
The #8031 is designed for small block or big block Chevy's.
The bracket has the flexibility to provide proper cable adjustment for
carbureted engines or fuel injected engines, with or without cruise
control. Along with a transmission kick-down cable mount location for
all transmission combinations. Below is the most common assembly.
A- Cruise control
B- Throttle cable
C- Transmission kickdown cable
The bracket can be trimmed
along the dotted line if necessary
for vehicles with vacuum cruise
control.
A
B
C
The #8032 is designed for small block Chevy's with E-Tec or Vortec
style heads.
1. When using Edelbrock fuel injection, assemble the bracket as seen
below.
2. If you are using a carburetor, assemble the bracket as seen below
left (#8031).
A- Cruise control
B- Throttle cable
C- Transmission kickdown cable
The bracket can be trimmed
along the dotted line if necessary
for vehicles with vacuum cruise
control.
A
B
C
Brochure #63-0080
© 2002 Edelbrock Corporation
Page1
Rev. 03/02
Loading...