How it Works
Edelbrock
Loading...
70211
User Manual
23 pgs388.82 Kb0

Edelbrock 70211 User Manual

©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 1 of 23
2002-2003 ECOTEC 2.2L PERFORMER EFI NITROUS SYSTEM
Catalog #70211
Table of Contents
Page #
b. Before You Install Your Edelbrock Nitrous System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
c. What is Nitrous Oxide? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
d. Safety Steps for Working with Nitrous Oxide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.0 Introduction to your Edelbrock 2.2L Ecotec Performer EFI Nitrous System
1.1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Jet Map Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.4 Performer Kit Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.0 Nitrous System Installation
2.1 Nitrous Bottle Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Bottle Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 Nitrous Bottle Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4 Nitrous Feed Line Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.5 Solenoid Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.6 Nitrous Spray Nozzle Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.7 Fuel Pressure Safety Switch Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.0 Electrical System Installation
3.1 Nitrous Electrical Components Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2 Nitrous Electrical System Wiring Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3 Nitrous Electrical System Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.4 Nitrous Relay and Fuse Holder Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.5 Arming Switch and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.6 Microswitch Installation and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.7 Final Electrical Installation Recommendations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.0 Before You Run Your Vehicle Using Your Edelbrock Nitrous System
4.1 Fuel System Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.0 Solenoid Inspection and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.0 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 2 of 23
Thank You…. …for purchasing an Edelbrock Nitrous Oxide Injection System.
Nitrous Oxide injection is one of the most exciting performance enhancements, for the dollar invested, on the market today. With the use of nitrous oxide come some important safety considerations. This manual has been written to help you during the installation and use of your Edelbrock Nitrous System. Please read it completely before you install and use your system. Please pay close attention to the safety information at the beginning of each section. The information contained there specifically pertains to each of the components and installation methodologies within the section.
Please take the time to read and understand the following….
By installing your Edelbrock Nitrous System, you indicate you have read this document and you agree with the terms stated below:
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with the Edelbrock Nitrous Systems. It is also the responsibility of the purchaser to determine the compatibility of the product with the vehicle or the device on which the purchaser intends to install it.
Edelbrock Corporation assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper operation, lack of responsible care, or all previously-stated reasons resulting from incompatibility with other manufacturer’s products and/or systems.
Edelbrock Corporation neither recommends nor condones the use of products manufactured or sold by Edelbrock Corporation for use on vehicles, which may be driven on public roads or highways, and assumes no responsibility for damages incurred by such use.
Edelbrock Corporation assumes no responsibility for damages incurred by the use of products manufactured or sold by Edelbrock Corporation on vehicles used for competition or racing.
Edelbrock General Warranty
It is the constant endeavor of Edelbrock Corporation to give our customers the highest quality products obtainable. Edelbrock warrants each new product, except Performer Series Carburetors, Race Division Parts, Tubular Exhaust Systems, RPM Series Mufflers, Cat-Back Systems and Performer IAS Shock Absorbers which are warranted separately, to be free from defects in both workmanship and material for a period of one (1) year from the date of purchase, provided that the product is properly installed, subjected to normal use and service and that the product is not modified or changed in any way, negligence by customer or installer or used for racing or competition purposes.
Our warranty service and repair facility is located at 2700 California Street, Torrance, California 90503. Customers who believe they have a defective product should either return it to the dealer from which it was purchased or ship it directly to Edelbrock along with proof of purchase and a complete description of the problem. The product must be returned freight pre-paid. If a thorough inspection of the product by the factory indicates defects in workmanship or material, our sole obligation shall be to repair or replace the product. Warranty covers only the product itself and not the cost of installation or removal.
Edelbrock Corporation shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product sold.
If you have any questions regarding a product or installation, please contact our Technical Department, toll free at 1-800-416-8628 from 7:00am to 5:00pm PST, Monday through Friday.
Thank you again for choosing Edelbrock Nitrous Systems.
2002-2003 ECOTEC 2.2L PERFORMER EFI NITROUS SYSTEM
Catalog #70211
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 3 of 23
Caution!!
Before You Install Your Edelbrock Nitrous System…
Please read this Installation manual fully before installing this system.
You will need to have available the following tools:
Hand Tools:
❑ Socket set including ratchets and extensions ❑ Screwdrivers ❑ Pliers ❑ Bench vise ❑ Wire crimping pliers, wire strippers ❑ Floor jack ❑ Razor blade or other sharp, flat edged cutting instrument ❑ Vehicle jackstands ❑ Safety glasses
Power Tools:
❑ Power drill ❑ Drill bits
You should understand the following skills:
❑ Power tool safety procedures ❑ Undercar safety procedures ❑ Proper measuring techniques ❑ Proper electrical assembly techniques ❑ Basic engine operation and tuning techniques
Anytime you have questions or concerns with your Edelbrock Nitrous System, please call our
Technical Support Hotline at 1-800-416-8628
before you start your engine.
℡
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 4 of 23
WHAT IS NITROUS OXIDE?
Nitrous Oxide is a cryogenic gas composed of nitrogen and oxygen molecules. It is stored as a “gas over a liquid” which means that both liquid and gaseous nitrous oxide is delivered into your engine. It is 36% oxygen by weight, which is what produces the added horsepower. By injecting more oxygen (and a corresponding fuel signal), we create the additional power much like a supercharger or a turbocharger does.
Nitrous Oxide is considered an “oxidizer” and not a fuel. Nitrous oxide is non-flammable by itself. Because nitrous oxide is a cryogenic, the same safety methods in handling dry ice apply to nitrous. Direct contact with the skin will cause a burn similar to contact with dry ice. The exception in using nitrous oxide comes from increased breathing hazards associated with the gaseous properties of nitrous oxide.
Nitrous Oxide is offered for sale in two common grades, which are U.S.P., and
Nytrous Plus
. U.S.P. nitrous oxide is medical grade nitrous oxide. Its common use is dental and veterinary anesthesia as well as use as a propellant in food such as canned whip cream. U.S.P. is not available to the public and would provide no advantage in the making of horsepower over the automotive grade nitrous oxide.
Nytrous Plus
was specifically designed for automotive consumption and differs from U.S.P. in that it contains trace amounts of sulfur dioxide (100 parts per million or “PPM”) added to prevent substance abuse. The Sulfur Dioxide is an irritant to all of your breathing passageways and will cause sore throats and sore nasal passages.
Nytrous Plus
was specifically created for automotive applications
and is available for sale to the public at many speed shops across the USA.
Safety Steps For Working With Nitrous Oxide
1. Never inhale
Nytrous Plus
(Nitrous oxide (N2O) for vehicular use) as continued exposure can cause death.
Nytrous Plus
has a maximum of 100 parts per million (ppm) of sulfur dioxide and will cause irritation to nose and throat passageways.
2. When working around any high-pressure gas including nitrous oxide, take all precautions to ensure that exposure to nitrous oxide is minimized.
3. Do not vent nitrous oxide to atmosphere in confined spaces. Only vent nitrous oxide in well-ventilated and open areas.
4. Liquid nitrous oxide can cause burns to human flesh so protect all skin in and around your hands, arms and face. Wear safety glasses and rubber gloves to protect from liquid nitrous oxide splatter.
5. When venting down the nitrous system, vent the line down closest to the nitrous bottle.
6. Do not use any form of Teflon tape as sealant on fitting connections. Use only Teflon paste.
7. When washing components, ensure the clean components are completely dry, free of oils, and solvents. Failure to remove all liquids could cause component or system failure.
8. Always turn the bottle off before making any repairs to the nitrous delivery system.
9. To safely release nitrous oxide in a pressurized line; a. Position vehicle in a well-ventilated, unconfined space. b. Turn bottle off. c. Slowly loosen the nitrous feed line at the bottle until you hear a light hissing noise. d. Allow the entire nitrous pressure to vent from the line. e. Perform your work on the system. f. Tighten the nitrous line to the bottle. g. Slowly open the nitrous bottle valve, listening for leaks. h. Perform leak checks on all affected fittings and the bottle fitting.
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 5 of 23
1.0 Introduction to your Edelbrock 2.2L Ecotec Performer EFI Nitrous System
Within the pages of this manual is information, safety tips and operation instructions for your new Edelbrock Nitrous System. Watch for these symbols to know where to go for information.
….There is safety related information here.
….shows where technical information about your vehicle or specific skills that may help during
installation.
….call Edelbrock Technical support hotline for more information.
1.1 General Information
The Edelbrock Performer EFI Nitrous System (Part Number 70211) is designed for 2002-2003 vehicles equipped with stock or slightly modified 2.2L Ecotec engines. Horsepower and
torque increases can vary with equipment upgrades and modifications.
The system utilizes one nozzle that is installed in the intake boot just before the throttle body. The additional fuel needed is supplied by the vehicle’s standard fuel system.
This system has been designed with some flexibility as to where certain components can be located to allow easy installation on vehicles with upgraded or modified equipment . The solenoid and microswitch brackets are designed to be manipulated (bent, cut, twisted, etc.) and the electrical components have properly sized and ample lengths of wire.
This system includes the bottle (shipped empty), bottle feed line and universal footprint steel bottle brackets. The mounting brackets also include rubber insulators to protect the surface of your nitrous bottle while mounted in the brackets. When installing your nitrous bottle, pay close attention to the installation instructions for the location of your bottle. Make sure that the installation of your bottle does not interfere with any systems that may lie under the location where you plan to drill holes for mounting the brackets.
Contact your local automotive store, motorcycle shop or race track for refilling of your bottle. Trust a professional to properly fill your bottle and reference your installation manual when re-installing your filled bottle back into your vehicle.
Always take care when handling a full bottle of nitrous oxide. Please reference this manual for further safety measures to take during the handling of a nitrous oxide bottle.
Please follow all safety methods during the installation of your Edelbrock Nitrous System, and follow all vehicle regulations and road laws when using your nitrous system.
℡
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 6 of 23
1.2 Jet Map Information
Edelbrock Engineering has conducted dyno testing with the Edelbrock 2.2L Ecotec Performer EFI system to ensure
the horsepower increase with the nitrous system is as intended. On a typically stock 2.2L Ecotec engine, you can expect the following approximate power gain:
Nitrous Jetting
Fuel Jetting Approx. HP Gains Final Air/Fuel Ratio
.032 .042 50hp 12.5:1 .036 .043 60hp 12.5:1
The dyno tests were conducted at Edelbrock using a stock 2.2L engine. These tests were conducted with 950 psi nitrous bottle pressure.
1.3 Engine Operation Considerations
When used correctly, nitrous oxide safely elevates cylinder pressures and temperatures while increasing combustion rate. These characteristics make the engine more sensitive to detonation. To ensure proper performance, engine and drive line life, the following tips are suggested:
• System Jetting
Never exceed the recommended jetting!! Excessive jetting will result in severe engine damage.
• Fuel Quality
Because Nitrous oxide is an oxidizer, fuel selection is critical. Both octane and fuel consistency affect fuel burn rate. The oxidizer quality of nitrous oxide will accelerate the burn rate, so we recommend a high quality of gasoline. We also recommend you use the same grade of gasoline every time you use your nitrous oxide system. This will help maintain the same fuel burn rate every time.
• Ignition Components
Most aftermarket performance chips increase the vehicle’s ignition timing, which can cause detonation with the use of nitrous oxide. Please consult with your chip manufacturer on information regarding the compatibility of your chip with nitrous oxide use.
If your vehicle is equipped with platinum type spark plugs, we highly recommend they be removed and replaced with the equivalent standard type spark plug.
• Engine System Upgrades
With all performance modifications, complementary system upgrades will always serve to elevate the consistency and longevity of an engine, especially when using nitrous oxide as a power adder. Modifications such as ignition upgrades, free-flowing exhaust, camshafts, cylinder heads, manifolds can all add to the performance of a nitrous oxide injected engine.
©2003 Edelbrock Corporation Brochure No. 63-0173
Rev. 02/03
Page 7 of 23
1.4 Performer Kit Bill of Materials
Qty. Description
Nozzle and Nozzle Hardware
1 ea. Nitrous fan spray nozzle 1 ea. Nitrous fan spray nozzle bulkhead body bolt 1 ea. Nitrous fan spray nozzle bulkhead concave nut 1 ea. 2 foot Steel Braided Hose, Blue
Solenoids and Solenoid Hardware
2 ea. Performer nitrous solenoids 1 ea. Solenoid tee 1/8 NPT male x 1/8 NPT female x
1/8 NPT male 1 ea. EFI solenoid mounting bracket 4 ea. Solenoid mounting screws (8 x 32 UNC x 5/16”) 1 ea. N2O Filter Fitting, 4AN x 1/8” NPT, Blue 1 ea. 3AN x 1/8” NPT Nitrous Fitting, Blue 1 ea. Microswitch mounting bracket
Pressure Regulator and Hardware
1 ea. 50PSI Nitrous Pressure Regulator 1 ea. 1/8”NPT Nipple 1 ea. Jet Holder Tee Assembly 3 ft. Vacuum Hose 5 ea. Hose Clamps
Qty. Description
Jets
1 ea. Jet .042
1 ea Jet .032
1 ea. Jet .036
1 ea. Jet .043
Fuel Pressure Safety Switch and Hardware
1 ea. Fuel pressure safety switch 1 ea. 1/8 NPT female -4AN female swivel 1 ea. 1/16 NPT male x 1/8 NPT female 1 ea. 90 deg. 4AN female x 4AN male
Bottle and Bottle Hardware
1 ea. 10-lb., Nitrous Bottle 1 pr. Nitrous Bottle Bracket Set (1 Tall, 1 Short) 1 ea. 660 Bottle Nut and Teflon Washer 1 ea. 18’ Nitrous Feed Line, Bottle to Solenoid
Electrical System Components
1 ea. Electrical Component Packages
(see
“Electrical System Installation”
section)
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use