Edelbrock 63-0081 User Manual
IN-LINE FUEL KIT
for Edelbrock Performer Series Carburetors
PLEASE study these instructions and the accessories regarding Edelbrock Performer Series Carburetors completely and
thoroughly before installing your new In-line fuel kit. If you have any questions or problems, contact our Technical Hotline
at: 1-800-416-8628, 7 am - 5 pm Monday-Friday, Pacific Standard Time or e-mail us at edelbrock@edelbrock.com.
INSTALLATION: When installing the ‘In-line fuel kit” refer to the diagram shown below, follow steps A, B, C, D. Always use
supplied A & B washer.
A-Place new washer carburetor side of
fitting.
B- Place fitting inline with Carb washer “A”.
C- Place washer “C” inline with fitting “B”.
C
A
B
D- Align nut “D” through A, B, C, align tube
D
portion and secure nut.
Brochure #63-0081
© 2002 Edelbrock Corporation
Rev. 03/02
IN-LINE FUEL KIT
for Edelbrock Performer Series Carburetors
PLEASE study these instructions and the accessories regarding Edelbrock Performer Series Carburetors completely and
thoroughly before installing your new In-line fuel kit. If you have any questions or problems, contact our Technical Hotline
at: 1-800-416-8628, 7 am - 5 pm Monday-Friday, Pacific Standard Time or e-mail us at edelbrock@edelbrock.com.
INSTALLATION: When installing the ‘In-line fuel kit” refer to the diagram shown below, follow steps A, B, C, D. Always use
supplied A & B washer.
A-Place new washer carburetor side of
fitting.
A
B
B- Place fitting inline with Carb washer “A”.
C
C- Place washer “C” inline with fitting “B”.
D- Align nut “D” through A, B, C, align tube
D
portion and secure nut.
Brochure #63-0081
© 2002 Edelbrock Corporation
Rev. 03/02
Loading...