Edelbrock 5252, 5250, 5251 User Manual

EDELBROCK HEAVY-DUTY TIE ROD SLEEVES

PostScript Picture

(ShockLogo.eps)

Catalog #5250, 5251, 5252

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Heavy-Duty Tie Rod Sleeves.
If you have any questions or problems, contact out Technical Hotline at: 1-800-416-8628,
7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at

[e-mail].

These are heavy-duty replacement parts for original tie rod sleeves and install basically in the same
manner as the original stock parts. See our catalog for complete application listing. To order a

catalog, please call (800) FUN-TEAM.

1. Installation of these parts requires precision front-end alignment equipment.

2. Installation should only be done by a qualified professional.

3. Following installation, drive vehicle about 10 miles and re-check all nuts for tightness.
Note: It is a good idea to periodically check suspension components for tightness and

potential problems.

©

2001 Edelbrock Corporation

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Technical Hotline: [phone]

Office: [phone]

Rev. 11/01