Edelbrock 350-400 user manual
CAMSHAFT: Performer RPM Roller Hydraulic
CATALOG #2204
ENGINE: Chevrolet 350-400 c.i.d. V8 (87-92)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5703. Use stock ratio
rocker arms only.
CAMSHAFT: Performer RPM Roller Hydraulic
CATALOG #2204
ENGINE: Chevrolet 350-400 c.i.d. V8 (87-92)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5703. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 296° Exhaust 300°
Duration at .050" Lift: Intake 234° Exhaust 238°
Lift at cam: Intake .359" Exhaust .365"
Lift at valve: Intake .539" Exhaust .548"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 56° BBDC 2° ATDC
Centerlines: Int: 107° ATDC Exh: 117° BTDC
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7800 or Accu-Drive gear drive #7890. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
Catalog #2204
Rev. 10/05
©2005 Edelbrock Corporation
Brochure #63-0465
Duration at .004" Lift: Intake 296° Exhaust 300°
Duration at .050" Lift: Intake 234° Exhaust 238°
Lift at cam: Intake .359" Exhaust .365"
Lift at valve: Intake .539" Exhaust .548"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 56° BBDC 2° ATDC
Centerlines: Int: 107° ATDC Exh: 117° BTDC
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7800 or Accu-Drive gear drive #7890. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
Catalog #2204
Rev. 10/05
©2005 Edelbrock Corporation
Brochure #63-0465
CAMSHAFT: Performer RPM Roller Hydraulic
CATALOG #2204
ENGINE: Chevrolet 350-400 c.i.d. V8 (87-92)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5703. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 296° Exhaust 300°
Duration at .050" Lift: Intake 234° Exhaust 238°
Lift at cam: Intake .359" Exhaust .365"
Lift at valve: Intake .539" Exhaust .548"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 56° BBDC 2° ATDC
Centerlines: Int: 107° ATDC Exh: 117° BTDC
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7800 or Accu-Drive gear drive #7890. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
CAMSHAFT: Performer RPM Roller Hydraulic
CATALOG #2204
ENGINE: Chevrolet 350-400 c.i.d. V8 (87-92)
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use recommended
Edelbrock Sure Seat or equivalentvalve springs #5703. Use stock ratio
rocker arms only.
Duration at .004" Lift: Intake 296° Exhaust 300°
Duration at .050" Lift: Intake 234° Exhaust 238°
Lift at cam: Intake .359" Exhaust .365"
Lift at valve: Intake .539" Exhaust .548"
Timing at .050 Lift: Open Close
Intake 10° BTDC 44° ABDC
Exhaust 56° BBDC 2° ATDC
Centerlines: Int: 107° ATDC Exh: 117° BTDC
Lobe Separation: 112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7800 or Accu-Drive gear drive #7890. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
Catalog #2204
Rev. 10/05
©2005 Edelbrock Corporation
Brochure #63-0465
Catalog #2204
Rev. 10/05
©2005 Edelbrock Corporation
Brochure #63-0465
Loading...