Edco Electronics MS500B User Manual

MS500B_User Manual

WARN

ING

TO PREVENT FIRE OR ELECTRIC SHOC K, DO NOT USE THIS PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADE TERMINALS CAN BE FULLY INSERTED TO PREVENT ANY
EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.

The Caution Marking is located at the bottom enclosure of the product.

IMPORTANT SAFETY INSTRUCTIONS

1.

Read these instruction
Keep these instructions in a safe place.

2.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water.

6.

Cleaning: Unplug this product from

liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not place this product on an unstable cart, stand, tripod, bracket,

9.

or table. The product may fall, causin
adult and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer,

Or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by
the manufacturer. A product and cart combination should be moved with care-quick
stops, excessive force and uneven surfaces may cause the product and cart
combination to overturn.

10. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatuses (including amplifiers) that produce heat.

If the provided plug does not fit into your outlet, consult an electrician for

11.

replacement of the outlet.

s

carefully

.

the wall outlet before cleaning. Do not use

g serious injury to a child or

12. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

13. Only use attachments/accessories specified by the manufacturer.

14. Unplug this product during lighting storms or when unused for a long periods of

time.

15. Refer all servicing to qualified service personnel. Servicing is required when the

product has been damaged in any way, such as the power-supply cord or the

plug is damaged, liquid has been spilled or objects have fallen into the product,

the product has been exposed to rain or moisture, does not operate normally, or

has been dropped.

16. This product shall not be exposed to dripping or splashing water and that no

object filled with liquids such as vases shall be placed on the product.

17. Do not overload the wall outlet. Use power source only as indicated.

18. Use replacement part as specified by the manufacturer.

19. The product may be mounted to a wall only if recommended by the

manufacturer.

20. Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks.

21. Power Sources: This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of power

supply to your home, consult your product dealer or local power company. For

products intended to operate from battery power, or other sources, refer to the

operating instructions.

22. Object and Liquid Entry: Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out part s

that could result in a fire or electric shock. Never spill liquid of any kind on the

product.

23. This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities or lack of experience and

knowledge unless they have been given supervision or instructions concerning

the use of the product by a person responsible for their safety.

24. Damage Requiring Service: Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a

need for service.

SAVE THESE INSTRUCTIONS

CAUTION

Follow the advice below for safe operations.

ON PROTECTION AGAINST LASER ENERGY EXPOSURE

 As the laser beam used in this compact disc player is harmful to the eyes, do not

attempt to disassemble the casing.

 Stop operation immediately if any liquid or solid object should fall into the cabinet.
 Do not touch the lens or poke at it. If you do, you may damage the lens and the

player may not operate properly.

 Do not put anything in the safety slot. If you do, the laser diode will be ON when

the CD door is still open.

 If the unit is not to be used for a long period of time, make sure that all power

sources are disconnected from the unit. Remove all batteries from the battery
compartment.

 This unit employs a laser. The use of controls or adjustment or performance of

procedures other than those specified here may result in exposure to hazardous
radiation.

Should any trouble occur, remove the power source and refer servicing to qualified
personnel.

WARNING

Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment

LOCATION OF CONTROLS