Edco Electronics BTSPK21 User Manual





Portable Bluetooth

Wireless Speaker

BTSPK21

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE

OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR

FUTURE REFERENCE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully.

2. Keep these instructions in a safe place.

3. Follow all instructions.

4. Do not use this product near water.

5. Cleaning: Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

6. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including
amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any
way, such as liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or
moisture, does not operate normally, or has been dropped.

9. This product shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases
shall be placed on or near the product.

10. Object Entry: Never push objects of any kind into this product through the openings.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

IC Warning

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference,
interference that may cause

undesired operation of the device.

and (2) this device must accept any interference, including

RF warning for Portable device
the device has been evaluated to meet general RF exposure requirement.

the device can be used in Portable exposure condition without restriction.

Thank you for your purchase.

Please visit our website at

www.borne-lifestyle.com

.





E-1

LOCATION OF CONTROLS



1. Speaker 10. Mini USB Charging / Aux-in Port

2. Colour changing LED Lights 11. Earphone/Headphone Port

3. Controls 12. USB Input Port

4. OFF/ON Switch

5. Microphone

6. Mode Button

7. Volume Decrease/Skip Backward Button

8. Play/Pause/Answer/End Button

9. Volume Increase/Skip Forward Button

13. Micro SD Card Port

E-2



FUNCTIONS

This speaker has multi-functions:

 Bluetooth Mode
 FM Mode
 Audio Line In Mode (aux-in)
 USB Mode
 Micro SD Card Mode
 Handsfree Speakerphone

CHARGING THE SPEAKER

Using the Charging Cable, plug the Mini USB Tip into the Mini USB Charging Port and plug the other
end (USB Tip) into a USB port on your computer or USB wall charger (not included). A red LED
indicator light will illuminate while charging and turn off when completed.

A full charge will take approximately 4 to 5 hours.

Product and Battery Disposal

This product contains a built-in lithium battery and should not be disposed of in normal household
waste. The battery in this device is not intended to be removed by the individual or end user. For
disposal and recycling, please contact your local waste management authorities. The recycling and
processing of electronic waste will make a significant contribution towards helping protect the
environment.

Warning: To reduce the risk of fire and burns, do not disassemble, crush, puncture, short external
contacts or dispose of in fire or water.

POWER ON/OFF

To turn on and off the speaker, slide the ON/OFF Switch to either position.

BLUETOOTH MODE

Pairing a Bluetooth Enabled Device for the First Time



NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and
connecting Bluetooth devices.

1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing
process.

2. Slide the ON/OFF Switch to the ON position. You will hear an alert tone and the speaker will
start flashing various colours.

E-3

3. By default, the speaker will automatically enter the “Bluetooth Mode” and start the pairing
process (when no USB drive or micro SD card is inserted).

4. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth
devices. When the search is complete, select “BTSPK21” from the Bluetooth device list.

5. When the Bluetooth connection is successful, a voice prompt will indicate “CONNECTED”.

NOTE:

 If pairing was unsuccessful, turn off the unit first and repeat the steps above to re-pair again.
 After successful pairing, paired devices will remember each other. Unless pairing information

is deleted, re-pairing is not required after the first time.

 If you want to pair the unit with other Bluetooth enabled devices, please disconnect the

existing device and pair with the new device according to the steps above.



6. Once you are successfully connected, you can use the controls on the speaker or the
controls on your Bluetooth device.

7. To increase or decrease the volume on the speaker, press and hold the Volume Increase or
Volume Decrease Button.

8. To skip songs forward or backward, press the Skip Backward or Skip Forward Buttons.

9. To pause and resume playback, press the Play/Pause button

HANDSFREE SPEAKERPHONE

While the speaker is on Bluetooth Mode and successfully paired to your smartphone, you can
answer phone calls through this speaker and use it as a speakerphone.

Press the Answer/End Button and to pick up and hang up a phone call.

NOTE: The Speakerphone function only works while in the Bluetooth Mode.

FM MODE

1. After you turn on the speaker, press the Mode Button repeatedly till you hear “FM Mode”.

2. You will need to connect the Charging/Aux-in Cable to act as the antenna. Connect the Mini
USB Tip into the Mini USB Charging Port.

3. Press the Play/Pause Button to start the auto search from 87.5 to 108MHz.

4. When you hear your desired station, press the Play/Pause Button immediately to stop the
auto search feature.

5. You can also use the Skip Backward or Skip Forward Buttons to manually search for your
desired station.

Tips for Best Reception:
Since the Charging/Aux-in Cable is acting as the antenna, try to keep it extended for the best
reception and near a window.

AUDIO LINE IN MODE (AUX-IN)

This speaker has an audio line in (aux-in) feature to connect your smartphone, MP3 player or other
digital music player.

1. After you turn on the speaker, press the Mode Button repeatedly till you hear “Audio Line In
Mode”.

E-4