Ective RC 1, RC 2, RC 3, RC 4 Service Manual

Remote ContRol
for ECTIVE power inverters
Overview
This remote control may be used to comfortably switch ECTIVE power inverters on and off at a distance. Connect the remote control to the inverter using the 3 meter long RJ12 connection cable (ISDN cable).
70 mm
100 mm
50 mm
85 mm
Weight 0,2 kg
Dimensions (L x H x W) 100 x 70 x 31 mm
Connection RJ12
60 mm
90 mm
Features Compatible Devices
The various models of the ECTIVE RC-Series offer different features to control and monitor the connected power inverter. The following table gives an overview of the supported functions and displays of each RC device:
Feature RC 1 RC 2 RC 3 RC 4
Us the correct ECTIVE remote control with your ECTIVE power inverter:
RC 1:
31 mm
28 mm
On/Off switch
ECO-mode/UPS-mode switch
Capacity status
Power consumption LED
Load display
Battery mode LED
Error LED
Shore power LED
Mains Priority circuit LED
Integrated charger LED
MPPT solar charge controller LED
RC 2:
RC 3:
RC 4:
ECTIVE MI
ECTIVE TSI
ECTIVE CSI
ECTIVE SSI
ECTIVE SI
ECTIVE.DE
Loading...