2.8 About PCLink............................................................................................. 186
V
Chapter 1. An Introduction to the Unit
This chapter explains how to use your CyberDict for the first time, the keys and controls,
power sources, default system settings and basic operations of your CyberDict. We hope
it will help you to use this device. Please proceed to the following chapters for details of
each function under different main menus.
1. Precautions
Data Backup
All your personal data should be copied onto separate printed records. We assume no
responsibility for data loss or as a result of improper use, reset the device, repairs,
defects, battery replacement / failures or any other causes.
Touch Panel & Display
A. Use the stylus which comes with this unit only. To avoid scratching on the screen, do
not use any other pointed objects such as pencils or pens.
B. Rub the screen lightly with a dry and soft cloth so as to avoid scratches. Do not use
any volatile liquids.
C. The screen may crack if the unit falls on the ground
Expansion Card
Insert the Smart Media Card into slot gently. Do not turn off the power or remove the
battery during data saving.
Non Waterproof
The device is non waterproof, please keep it away from any liquid. In case it happens,
remove the battery immediately, dry the surface and send the device to our service
center for checking. Do not try to turn on the unit by yourself.
Battery
A. Please remove the battery to avoid leakage and damage to the unit whenever the
1
unit will not be used over an extended period of time.
B. Use the rechargeable battery and the power adaptor that come with this device only.
(Output: DC5V 1A)
C. To maximize the life of the rechargeable battery, please recharge only when the
battery low message is indicated
D. Avoid any contact of two poles of the battery and keep away from fire.
Magnetism
The speaker of this unit has magnetism, please do not place it close to any equipments
which apply with magnetism theory to avoid unwanted demagnetization or effect.
Note:
Any damage caused by the above reasons is not covered by warranty.
2. How to Use CyberDict for the First Time
A. Insert the Lithium-ion rechargeable battery which comes with this device
into the battery compartment.
B. Press [ON/OFF] to turn on your CyberDict. If the screen remains blank,
please check the following the steps:
¾ Be sure the battery is securely in place.
¾ Press [Shift] +
viewing.
C. Press [RESET] and follow the instructions shown on the screen.
¾ Tap the centers of the targets“+"to calibrate the sensitivity and accurate
position of touch panel, there are 3 targets to be tapped: lower left, upper right
and the center.
¾ After the touch panel correction, a selection window appears:
∗ Tap [No] to access the main menu.
∗ Tap [Yes], all the default settings will be used.
∗ If you tick [Clear User Data] and tap [Y], all your personal data and settings
will be deleted, then access the system’s date and time setting screen.
∗ Tap [F1] to set the format of date and time.
∗ Tap [Finish] to confirm. A default startup screen will be shown.
/ to adjust the LCD contrast for optimal screen
2
D. The main menu of Dictionaries will be shown.
E. Press
Note: The system will omit the “Auto Power Off T imer” and won’t turn of f under th e
following situations:
¾ During natural voice pronunciation
¾ During data management, such as copying, saving, transmission, etc.
¾ During memory rearrangement.
to shift among Thai / English / icon modes in the main menu.
3.Expansion Card
1. When the power is on:
A. Do not open the SMC slot cover, otherwise the power will turn off automatically.
B. Do not remove/insert the card, otherwise you may encounter permanent data
lose.
2. Write Protection for SMC. (SMC is an optional accessory)
Stick the Write Protect label on the SMC.
3
4. Product Layout
* Obverse side:
1- Screen 2- On-screen control keys (Right)
3- Speaker 4- LED Light
5- Keyboard 6- RESET Key
7- Microphone 8- On-screen Control Keys (Left)
4
* Reverse side:
1- Earphone Socket 2- SMC Slot
3- Stylus 4- Stylus Slot Cover
5- Mini USB Socket 6- LED Light
7- DC Adaptor Socket 8- Battery Cover (Battery Compartment)
5
5. Keyboard Buttons
Key
-
Function
To initialize the system
Power on / off button
Select main menu
Function keys, same as F1-F5 on the screen
Under the main menus, press it to shift from one to another
Return to the main menu from any functions.
Shift among English / Thai / Icon menu
Switch English / Thai input mode when editing data
Listen in English
Listen in Thai (In related functions only)
Listen in Chinese / Japanese / Korean (In related functions only)
Select the item “Ⅰ” under the main menu
Mandarin phonetic symbol
Thai character
Thai character
Select the item “Ⅱ” under the main menu
Mandarin phonetic symbol
Decimal point for calculator or full stop for the text
Comma for the text with [SHIFT] key
Hyphen for the text
Mandarin phonetic symbol
Thai character
Thai character
Reading after the device in the definition screen
Access the Naturalistic Learning Method
6
Save current record or data
Save an item for review and test
Input special symbols
Mandarin phonetic symbol
Switch the font size (in the definition screen of dictionaries)
Asterisk
question mark ”?”
Mandarin phonetic symbol
Thai character
Thai character
Move the cursor up; Shift + to adjust LCD contrast
Move the cursor down; Shift + to adjust LCD contrast
Move the cursor to the left
Move the cursor to the right
View the previous entry or page
View the next entry or page
To adjust voice volume with [SHIFT] key
Numeric key “1”
The first tone of Chinese Pin Yin input method
Mandarin phonetic symbol
Thai character
Thai character “,”
View Chinese in Travel Dialogues
Numeric key “2”
The second tone of Chinese Pin Yin input method
Mandarin phonetic symbol
7
Thai character
Thai character “/”
View Japanese in Travel Dialogues
Numeric key “3”
The third tone of Chinese Pin Yin input method
Mandarin phonetic symbol
Thai character
View Korean in Travel Dialogues
Numeric key “4”
The fourth tone of Chinese Pin Yin input method
Mandarin phonetic symbol
Thai character
Thai character
View German in Travel Dialogues
Numeric key “5”
Mandarin phonetic symbol
Thai character
Thai character
View Spanish in Travel Dialogues
Numeric key “6”
Mandarin phonetic symbol
Thai character
Thai character
View Italian in Travel Dialogues
Numeric key “7”
Mandarin phonetic symbol (light tone)
Thai character
View Dutch in Travel Dialogues
8
Numeric key “8”
Mandarin phonetic symbol
Thai character
Thai character
View French in Travel Dialogues
Numeric key “9”
Mandarin phonetic symbol
Thai character
Thai character
Numeric key “0”
Mandarin phonetic symbol
Thai character
Thai character
English letter “Q”
Mandarin phonetic symbol
Thai character
Mathematic sign “Hyp” with [SHIFT] key
Mathematic sign “1/X”
English letter “W”
Mandarin phonetic symbol
Thai character
Thai character
1
Mathematic sign “
−
” with [SHIFT] key
sin
Mathematic sign “sin”
English letter “E”
Mandarin phonetic symbol
Thai character
Thai character
9
1
Mathematic sign “
−
” with [SHIFT] key
cos
Mathematic sign “cos”
English letter “R”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “1” with [SHIFT] key
tan
−
Mathematic sign “tan”
English letter “T”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “
”
English letter “ Y”
Mandarin phonetic symbol
Thai character
Thai character
Logical sign “and” with [SHIFT] key
Mathematic sign “
÷”
English letter “ U”
Mandarin phonetic symbol
Thai character
Thai character
Logical sign “or” with [SHIFT] key
Mathematic sign “
English letter “ I”
×”
Mandarin phonetic symbol
Thai character
10
Thai character
Logical sign “not” with [SHIFT] key
Mathematic sign “-”
English letter “O”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “+”
Logical sign “xor” with [SHIFT] key
English letter “P”
Mandarin phonetic symbol
Thai character
Thai character
Calculate the result in Statistical calculator with [SHIFT] key
Mathematic sign “
”
English letter “A”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “” with [SHIFT] key
10
X
Mathematic sign “log”
English letter “S”
Mandarin phonetic symbols
Thai character
Thai character
Mathematic sign “
x
” with [SHIFT] key
e
Mathematic sign “ln”
English letter “D”
11
Mandarin phonetic symbol
X
X
Thai character
Thai character
Mathematic sign “
Mathematic sign “√”
English letter “F”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “
Mathematic sign “
English letter “G”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “(”
English letter “H”
2
” with [SHIFT] key
Y
” with [SHIFT] key
Y
”
X
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “MC”
Mathematic sign “)”
English letter “J”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “MR”
English letter “K”
12
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “M-”
English letter “L”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “M+”
English letter “Z”
Mandarin phonetic symbol
Thai character
Thai character “(“
Convert angular unit degree/radian/gradient in scientific calculator with
[SHIFT] key
Mathematic sign “π”
English letter “X”
Mandarin phonetic symbol
Thai character
Thai character “)”
Convert counting system in scientific calculator
Mathematic sign “exp” with [SHIFT] key
English letter “C”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign “X”
English letter “V”
Mandarin phonetic symbol
13
Thai character
Thai character
Mathematic sign “!” with [SHIFT] key
Mathematic sign “%”
English letter “B”
Mandarin phonetic symbol
Thai character
Thai character
English letter “N”
Mandarin phonetic symbol
Thai character
Thai character
Mathematic sign :all clear (AC)
English letter “M”
Mandarin phonetic symbol
Thai character
Thai character “?”
Access Sort function in statistical calculator
Mathematic sign: clear (C)
Exit current function
Delete a character after the cursor. (Back Space)
Delete selected item, same as [DEL] on the screen
Switch between insert and replace mode
To shift among the fields
Select Chinese input method with [SHIFT] key
Corresponding to [Tab] icon when it appears in the definition screen of
English-Thai, Longman, & Oxford Dictionaries
Lock keyboard for input capital letters in English
Switch between Traditional / Simplified Chinese system with [SHIFT] key
14
Enter a space when editing data
The light tone of Chinese Pin Yin input method
Confirm current operation
Add a new line during editing
Calculation the result in calculation function, as [=] key
6. On-screen Control Keys
Tap with stylus to activate the functions.
English-Thai Dictionary
Thai-English Dictionary
Thai-Thai Dictionary
Longman Dictionary
Oxford Dictionary
Illustrated Dictionary
Animated Dictionary
Naturalistic Learning Method; Access the repeating after the device
Video Learning
MP3 Song
Digital Voice Recorder
My Picture
To check the battery power
To adjust LCD brightness / contrast and voice speed / volume
Same function as
Same function as
Same function as
Same function as
/ key
key
key
key
15
7. Main Power & the Card (SMC)
One of the following power sources can be used.
A. Rechargeable Lithium-ion battery which comes with this device (3.7V/ 780mAH).
B. A power adaptor with DC output 5V/1A which comes with this device. This power
source can be combined with option A.
7.1 How to Install / Replace the Battery
Insert:
(Turn off the power)
A. Remove the battery cover.
B. Insert the battery into the compartment following the direction of arrows.
C. Close the battery cover securely.
Remove:
A. Remove the battery cover.
B. Remove the battery.
C. Close the battery cover securely.
Note:
¾Whenever [Battery Low] message appears, please insert the power adaptor to
recharge the battery.
¾Your personal data will be retained even the device is out of power, but please
remember to turn off the power before taking out the battery(if necessary).
¾If [Battery Low] message appears very soon after you havefully recharged the
battery, it is probably out of order, you may need to change a new one.
16
7.2 How to Replace the Card
Insert:
(Turn off the power)
A. Open the cover of SMC slot.
B. Insert the card into the compartment following the arrow instructions.
C. Close the cover securely.
Remove:
A. Open the cover of SMC slot.
B. Remove the SM card.
C. Close the cover securely.
7.3 To Recharge the Battery
A. Use the power adaptor with DC output 5V/ 1A which comes with this unit only.
Be Caution: Using an over spec. power adaptor may cause severe damage
to the circuit of this device.
B. Plug the charging adaptor into the DC socket on the device and plug the power
adaptor into a wall outlet. Normally, it takes 2.5 hours for fully recharged.
Note:
¾ Any damage due to using of other power adaptor is not covered by warranty.
¾ Any damage due to using of other rechargeable battery is not covered by
warranty.
¾For the first use of this device, please fully recharge the battery for 2.5 hours,
the red LED light will turn to green color when it is fully charged.
7.4 Checking the Battery Power
You are allowed to tap the hot key on the screen to check the battery power
anytime.
17
8. Main Menus
Tap [F1]~[F5] on the screen to select a main menu, or press or~or
to select a main menu.
[F1]DICTIONARY
[F3] PIM
[F5]MULTIMEDIA
[F2]STUDY
[F4] SYSTEM
18
Note:
A. In the main menus:
¾ Press
¾ Press any letter keys to access the corresponding index screen of the main menu in
the [F1] Dictionary main menu.
B. In the functional screens:
¾ Press
¾ Press
to shift among icon / English / Thai modes.
to return to the main menu.
to return to the previous screen.
9. Input Methods
9.1 Inputting English/Thai with Keyboard
A. Press to switch English/Thai input mode.
B. Press
to temporarily lock the keyboard for inputting upper case.
9.2 Inputting Special Symbols with Keyboard
In English/Thai input mode, press key, then tap the corresponding special symbols
to confirm.
Note:Special symbols can not be used as the first letter in dictionary input mode.
9.3 Inputting Chinese with Keyboard
A. Press [SHIFT]+ or tap to select your favorite Chinese input method.
Chinese input methods: Chinese Pin Yin, Mandarin Phonetic Symbol, Cantonese
Pin Yin, Radical stroke, Total Strokes, Chinese
Handwriting.
B. Press or tap the corresponding numeric keys to select the desired Chinese
character.
9.4 Handwriting Recognition
Whenever the icon is displayed on the screen, it means handwriting recognition is
available.
¾ Tap the handwriting icon .
¾ Tap
handwriting.
to switch to English handwriting. Tap to switch to Thai
19
¾ Tap to activate English soft keyboard. Tap to activate symbol soft
keyboard.
¾ Tap
¾ Write English letter, Thai letter or Chinese character in the handwriting zone with
¾ The identified letters or characters will be shown in the standby zone within a few
¾ Tap to select the letter or character you need from the standby zone.
¾ If none of the Thai characters, Chinese characters or English letters shown in the
to activate phonetic symbol soft keyboard.
the stylus.
standby 1 standby 2 handwriting1 handwriting 2
seconds.
standby zone match your handwriting, you can tap [LEARN] to access the
keyboard input mode. Enter the Thai characters, Chinese character or English
letters with keyboard and the system will “Learn” to correspond your handwriting
with the word you entered.
¾ Tap
¾ You can write words in handwriting area 1 and handwriting area 2 alternatively.
Note:
The pen lifting time of handwriting recognition can be set at < F4 SYS—3.System
Setting--9. Handwriting Setting>.
to return to keyboard input mode.
20
9.5 Hints for Handwriting Recognition
9.5.1 How to Increase Recognition Rate
A. Write English letters in English handwriting mode.
B. Write Thai letters in English handwriting mode.
C. Write Chinese character in Chinese handwriting mode,
D. Write Chinese characters using standard strokes.
E. Write clearly and legibly, do not omit any strokes.
F. Avoid unnecessary marking or strokes.
9.5.2 Write in Standard Chinese Strokes
Standard Chinese strokes are written from left to right, from up to down, from outside to
inside.
9.6 English Soft Keyboard
9.7 Symbol Soft Keyboard
9.8 Phonetic Symbol Soft Keyboard
21
10. Select the Date
Ex. Select the correct date for the records in [F3 PIM].
¾ Press
month and day.
¾ Tap
select the year.
¾ Tap
¾ Tap the arrow head to change the year,
or tap the year area to open a window
for revision.
Note:[F1No Date] appears under "F3 PIM--4.To Do List" only.
/ and / to select the
or press page up/down to
to shift the cursor.
11. Input the Number
You need to input number in some
applications of PIM & SYS.
¾ Tap or press the numeric and symbol
keys to input the number.
¾ Tap [F1Finish] to confirm.
12. Set the Time
Set the time for the records in "PIM" and "SYS", take [F3 PIM]--[3.World time]—[F1 Set
Time] as example.
A. Tap
B. Press [A]/[P] key to select AM/PM. (Only available in 12 hours time format)
C. Tap the clock to display it in full screen.
¾ Tap the minute hand of the clock to change the time.
¾ Tap the number circle to set the time.
D. Tap [Finish] to confirm.
/ to adjust the number.
22
13. Default System Setting
Local city: Bangkok
Local time setting: (03.01.2004), (08:00AM)
World city: New York
World time setting: (03.29.2004), (08:00PM)
World city: Hong Kong
World time setting: (03.01.2004), (09:00AM)
Time system: 12-hours system
Alarm setting: Off
Pen & Keys Tone: On
Daylight-saving Time: None
Display language: Icon
Power Cut-off Interval: 5 minutes
Opening setting: Dictionary Main Menu
Password setting: None
14. USB Storage / Drive
Our product provides USB Storage function, you are allowed to link this device and your
PC with USB cable to manage the folders and files.
23
Note:
You will find there are 2 more drives appear under [My computer] in your Windows
software. The first stands for the memory of CyberDict, the second stands for the
memory of the SMC slot.
15. File Management
You are allowed to create folders or saving files and data. However, please put your
download titles in the corresponding and default paths as below to make sure the files