ECS LPU B, LPZ JL Data Sheet
82
• Center frequency (fo) is available in a range of 450 to 470KHz. The standard tolerance of fo is ±2KHz. For synthesizers and digital indicators, ±1KHz tolerance is also available.
• The LPZ455JL series, with its two directly coupled elements, has a high degree of selectivity. The series features excellent matching characteristics for IFT.
( ) = Typical values
ECS, INC. INTERNATIONAL 1105 S. RIDGEVIEW, OLATHE, KS 66062 • 913-782-7787 • 800-237-1041 • FAX 913-782-6991 • WWW.ECSXTAL.COM
CERAMIC FILTERS CERAMIC FILTERS
93.5
7.5
2.5 2.5
3.5
Connection
Input
Ground
Output
3
3
2
2
1
1
LPUB / LPZJL
SERIES
CERAMIC FILTER
OPERATING CONDITIONS/ELECTRICAL CHARACTERISTICS
3dB SELECTIVITY SELECTIVITY INSERTION
PART NUMBER
BANDWIDTH (KHz) -9 KHZ OFF (dB) MIN. +9 KHZ OFF (dB) MIN. LOSS (dB) MAX.
COMPOSITION
LPU455B - (connected with IFT) 10 ±3 5 (7.5) 3 (5.5) 5 (3) 1 Element with IFT
LPZ455JL - (connected with IFT) 5.5 ±1 18 (20) 18 (20) 7 (3.5) 2 Elements Direct Coupling Type
Figure 1) LPU455B – Front and Side views
7.0 ±0.3
Direct Coupled
3
Direct Coupled
4
Ground
5
Connection
Output
6
Ground
2
Input
1
9.0 ±0.33.5 ±0.5
7.0 ±0.3
2.5 2.5
3.6
3.6
3
2
1
321
6
5
4
2.5 2.5
Figure 2) LPZ455JL – Front, Side and Bottom views
FEATURES
• AM use
• RoHS Compliant (Note 7 exemption)
PACKAGE DIMENSIONS (mm)
ITEM \ TYPE LPU B LPZ JL
①—②②—➂➃—➅①—②②—➂➃—➅
70 T 115 T 7 T 68 T 84 T 14 T
UNLOADED Qu 105 90
TUNING CAPACITY 180pF 180pF
3 4
2
1 6
WINDING SPECIFICATIONS
Bottom
view
LPU 455B LPZ 455JL
R1
Rg
GROUND
INPUT OUTPUT
Rg+R1=R2=input/output impedance
S.S.G.
LPU
RF
V.M.
R2
1
2
3
Figure 4) LPU Series – Measuring Circuit
Figure 3) Recommended IFT Specifications
3K
Rg = 50Ω
LPZ
S.S.G.
RF
V.M.
3K
1 6
2
3 4
: Input
: Ground
: Direct Coupled
: Output
1
235
4
6
5
Figure 5) LPZ Series – Measuring Circuit
ECS, Inc. International
1105 South Ridgeview Road
May 16, 2007
Olathe, KANSAS, 66062 USA
Director of Marketing and OEM Sales
E-mail: mikeh@ecsxtal.com
www.ecsxtal.com
913-782-7787
1-800-237-1041
Fax: 913-78
M
Phone: 1-800-237-1041
2-6991
ike Huennekens
C E R A M I C R E S O N A T O R/F I L T E R
Application Information Request
Attention: All Customers
From: Mike Huennekens, Director of Marketing and OEM Sales
Subject: Ceramic Resonator Application Information Request
ECS is requesting that you complete the section below that will allow us to determine if the specific application is suitable for the ceramic
resonator/filters that you have requested.
Ceramic Resonators/Filters, both surface mount and through-hole type, are a much different frequency control solution than that of a crystal
based device. Not only are there “matching” issues to specific integrated circuits and processors with ceramic based piezoelectric
components but for multiple reasons ceramics are not the most advantageous nor robust frequency control solution for certain applications.
In addition, ECS does not approve the use of its ceramic products in Automotive, Military, Avionics, Life Sustaining or Life Support
systems or any other related medical application.
If the customer chooses to use this product in one or more of the noted applications without the written consent of ECS, Inc., ECS,
Inc. shall be held harmless, and given release of liability and indemnification from claims of any nature.
Please complete the following and submit this form as soon as possible.
ECS Part Number
Estimated Annual Usage
Has this part already been
approved for this application?
Has this part been ordered
previously for this application?
End Customer
Application Details
You Must Be Specific
be returned for more information.
or this may
Yes No
Yes No
I certify that the above information is true and correct to the best of my knowledge and acknowledge that ECS will be held harmless if this
item is used in the restricted applications noted above.
__________________________________________ ** If this item will be used by a 3
rd
party ECS may require
Company Name a form be completed and signed by all parties.
__________________________________________
Print Your Name
__________________________________________
Title
__________________________________________
Signature Date
Approved: Disallowed: Date: ____________________ Approved By: ______________________________________
Please direct any further inquires to Brad Slatten at brads@ecsxtal.com
understanding and patience in this process.
To be completed by ECS Inc., International
or Carla Williams at carlaw@ecsxtal.com . We thank you for your
Loading...