Ecostrad Tuscany EsS-HC-25 Installation & Operating Instructions Manual

Ecostrad Tuscany

Ceiling or Wall-mounted Infrared

INSTALLATION & OPERATING INSTRUCTIONS

TECHNICAL INFORMATION:

Rated Power:
Heating Element:
Reflector:
Dimensions:
Warm-up time:
Useful wavelength range:
Weight:
Warranty:
Protection:

2500W at 230V
Ultra long life Carbon heating lamp (10,000 hours)
Mirror Aluminium (98% reflection preventing rearward heat loss)
879 x 195.3 x 84.7 mm
5-10 seconds
2 - 5µm
3kg
2 Years (excludes lamp)
IP55

Heater

ELECTRICAL EQUIPMENT:

Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.

IMPORTANT NOTICE TO PURCHASER:

Before utilizing the product, you should determine the suitability of the product for its intended use.
ECOSTRAD expressly disclaims the implied warranties and conditions of merchantability and fitness for a
particular purpose. In no case shall ECOSTRAD LTD be liable under any legal theory, including but not limited to
contract or strict liability, for any direct, indirect special, incidental or consequential damages resulting from product
use.

The product complies with Safety Standards EN60335-2-30, RoHS and EMC EN 50336 and EN 62233. These
cover the essential requirements of EEC Directives 2006/42/EC, 2011/65/EC and 2004/108/EC.
Original instructions covering TUSCANY 2500R produced 042017 onwards.

IMPORTANT SAFETY PRECAUTIONS

READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE

Failure to observe these instructions will invalidate the warranty. This unit may be a source of possible shock.
Disassemble only to replace lamp. No user-serviceable parts inside. Source of possible ignition.

WARNING

TO REDUCE THE RISK OF FIRE,

1. Fragile Glass Lamp. Use care when unpacking, handling and installing the Tuscany.

2. This appliance must be disconnected from its power source during installation or service activities and when

replacing.

3. DO NOT use this heater below an installation height of 2.4m with a programmer, timer or any other device

that switches the heater on automatically.

4. When mounted on a stand (available separately) DO NOT use this heater in the immediate surroundings of a

bath, shower or swimming pool.

5. In order to avoid overheating and potential fire hazard, DO NOT cover the heater. DO NOT cover the heater

with insulating material or a similar material under any circumstances.

6. DO NOT install the heater pointing directly downwards and maintain at least 500mm from ceiling or other

objects.

7. DO NOT touch the heater when in use. The Ecostrad Tuscany rises to very high temperatures in use. After the

heater has been switched off let the heater completely cool down before touching it.

8. DO NOT use the heater if the power cord is damaged. This must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

9. DO NOT use the heater to ignite materials.

10. This heater must only be used for the heating of people outdoors or indoors in an unenclosed space. The

Tuscany is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack
of experience or knowledge, regardless of whether they have been given instruction or are under supervision.
Children should be kept away and should not be left unsupervised around the unit.

11. All operators shall only switch on/off the appliance provided that it has been placed or installed in its

intended normal operating position and they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall not plug in, switch on or
regulate the appliance or perform user maintenance including cleaning.

12. IMPORTANT: Ensure supply voltage does not exceed 245 volts.

ELECTRIC SHOCK OR INJURY:

SAVE THESE INSTRUCTIONS.

WATER INGRESS PROTECTION:

The Tuscany is rated to a standard IP55 enabling it to be mounted outdoors and exposed to occasional rainfall. To
prolong the life of the heater we recommend installing it where it will be sheltered from the effects of
weather. The Tuscany is not intended for installation in locations that are permanently wet or humid.

Installation in potentially wet or humid rooms such as bathrooms must be carried out by a suitably qualified
installer and comply with local electrical safety requirements. Installation must be such that:

• the heater must not be able to become detached from the fittings and fall into a bathtub, shower,
swimming pool or other water container;

• Switches and other controls cannot be touched by a person in a bath or shower.

If in doubt, do not install. Ecostrad Ltd shall not be liable for any loss, damage or injury caused or

resulting from inadequate fitting or incorrect placement of heaters close to water sources.