ECOSENSE ES WCTZ User Manual
Eco-EMS
<Contents>
1. Monitoring system 2
2. Radio transmit set 3
2.1 ES-WCTZ4P(EcoSensor Wattmeter CT type Triple Phase 4 lines) 3
2.2 ES-WCTZ3P(EcoSensor Wattmeter CT type Triple Phase 3 lines) 4
2.3 ES-WCSZ(EcoSensor Wattmeter CT type Single Phase) 5
2.4 ES-PTZ(EcoSensor Pulse Transfer Zigbee) 6
2.5 ES-ENVZ(EcoSensor Environment Zigbee) 7
2.6 ES-Wattmeter(EcoSensor Wattmeter) 7
3. Radio repeater 8
3.1 ES-RXZ(EcoSensor Rx Zigbee) 8
4. Network 9
4.1 Specifications 9
4.1 Features 9
4.1 Mimetic diagram 9
5. Installation 10
5.1 Products installation 10
5.1.1 ES-WCTZ4P, WCTZ3P, WCSZ 10
5.1.2 ES-PTZ 14
5.1.3 ES-ENVZ 15
5.1.4 ES-Wattmeter 15
5.1.5 ES-RXZ 16
5.1.6 LED sign light 17
6. Products specifications 18
6.1 ES-WCTZ4P 19
6.2 ES-WCTZ3P 20
6.3 ES-RXZ 22
6.4 Clamp On Current Transformer 22
Eco-EMS User Manual
1
Eco-EMS
1. Monitoring system
Eco-EMS is real-time system to measure energy usages like electricity, gas, fuel
and environmental factors like temperature, humidity, CO2 concentration, and to
transmit these data to server for analyzing by wire and wireless. It can be
interlocked with existing facilities like pulse out type meters, and also provide basic
soft/hard ware for EnMS.
Fig.1-1 Mimetic diagram of energy monitoring system
Eco-EMS User Manual
2
Eco-EMS
2. Radio transmit set
2.1 ES-WCTZ4P(EcoSensor Wattmeter CT type Triple Phase 4 lines)
2.1.1 Appearance
Fig.2-1-1 Appearance of ES-WCTZ4P(3Phases 4lines)
1. CT : Current Transformer
2. CT connector (R/S/T)
3. LED sign light
4. Power On/Off switch
5. RS485 line connector
6. RS485 communication setting jumper
7. PT connector (R/S/T/N)
ES-WCTZ4P using a special screw, individuals can’t arbitrarily remove the※
screws.
Eco-EMS User Manual
3
Eco-EMS
2.1.2 Label design & Cross section
Fig.2-1-2 Label design of ES-WCTZ4P
Fig.2-1-3 Cross section of ES-WCTZ4P
2.1.3 Functions
- measuring usage of 3phases 4lines(R, S, T, N) electric power
- active power(total, each of phase), reactive power(total, each of phase), the
maximum value of electric power and current
- measuring level of month, day, hour, minute, second
- storage of previous data and supply drive electric power by oneself
Eco-EMS User Manual
4
Eco-EMS
2.2 ES-WCTZ3P (EcoSensor Wattmeter CT type Triple Phase 3 lines)
2.2.1 Appearance
Fig.2-2-1 Appearance of ES-WCTZ3P(3phases 3lines)
1. CT : Current Transformer
2. CT connector (R/S/T)
3. LED sign light
4. Power On/Off switch
5. RS485 line connector
6. RS485 communication setting jumper
7. Power supply connector (DC 9V/1~2A)
8. PT connector (R/S/T)
ES-WCTZ3P using a special screw, individuals can’t arbitrarily remove the※
screws.
2.2.2 Label design & Cross section
Fig.2-2-2 Label design of ES-WCTZ3P
The same as the ES-WCTZ4P.(2.1.2 Cross section)
Eco-EMS User Manual
5
Eco-EMS
2.2.3 Functions
- measuring usage of 3 Phase 3 line(R, S, T) electric power
- active power(total, each of phase), reactive power(total, each of phase), the
maximum value of electric power and current
- measuring level of month, day, hour, minute, second
- storage of previous data
2.3 ES-WCSZ(EcoSensor Wattmeter CT type Single Phase)
2.3.1 Appearance
Fig.2-3 Appearance of ES-WCSZ
1. CT : Current Transformer
2. CT connector (one of R/S/T)
3. LED sign light
4. Power On/Off switch
5. RS485 line connector
6. RS485 communication setting jumper
7. PT connector (one of R/S/T, N)
ES-WCSZ using a special screw, individuals can’t arbitrarily remove the screws.※
2.3.2 Functions
- measuring usage of Single phase 2 line(one of R, S, T and N) electric power
- active power(total, each of phase), reactive power(total, each of phase), the
maximum value of electric power and current
- measuring level of month, day, hour, minute, second
Eco-EMS User Manual
6
Eco-EMS
- storage of previous data and supply drive electric power by oneself
2.4 ES-PTZ(Pulse Transfer Zigbee)
2.4.1 Appearance
1. Pulse data transmitting point
2. 220V DC adapter
3. Power supply connector
4. LED sign light
ES-PTZ using a special screw,※
individuals can’t arbitrarily remove
the screws.
Fig.2-4 Appearance of ES-PTZ
2.4.2 Functions
- integrating Pulse data of Energy meter
- wire reception and wireless transmission
2.5 ES-ENVZ(EcoSensor Environment Zigbee)
2.5.1 Appearance
1. Data transmission point
2. Sensor of environmental factor
3. LED sign light
ES-ENVZ using a special screw,※
individuals can’t arbitrarily remove the
screws.
Eco-EMS User Manual
Fig.2-5 Appearance of
ES-ENVZ
7
Loading...