REVISION HISTORY
Revision Date Description
0.0 2013/04/03 Start Document
Table of Contents
Chapter 0 Overview
Chapter 1 MWCT device Overview
1.1 Summary
1.2 Feature
Chapter 2 Device Components Names
Chapter 3 Wiring Way
3.1 Single phase 2 wire
3.2 3 phase 4 wire
3.3 Clamp CT connection
Chapter 4 AD Module
4.1 AD module name
4.2 Status LED
4.3 CT type select switch
Chapter 5 Notice of Installation
5.1 AD module installation
5.2 5Vdc adapter use
OVERVIEW
INTRODUCTION
MWCT installation and device operation manual
C o p yrig h t 2 0 1 3 E C O S E N S E C o ., L td.ⓒ
A ll r ig h ts re serv e d
4 / 1 7
MWCT installation and device operation manual
MWCT DEVICE OVERVIEW
INTRODUCTION
This chapter summarizes the basic information and feature about MWCT.
1.1 Summary
MWCT device has 3 phase 4 wire type and single phase 2 wire type. MWCT is installed with•
16L, 24L, 36L clamp CT type depends on the external diameter of load line and current
capacity.
MWCT device measures accumulated active power, accumulated reactive power, instant active•
power, voltage, electric current, frequency and power factor for the 3 phase
• MWCT device supports Zigbee wireless communication and Ethernet, RS-485 wire communication.
1.2 Feature
MWCT device measures 16 channel by 3 phase 4 wire and 48 channel by single phase 2 wire.•
Set up the display information and device setting by Touch LCD.•
Maximum voltage: 500VAC•
Maximum electric current•
CT 16L : 100 A
24L : 500 A
36L : 1000 A
Set-up of transmitting period is possible as a second.•
It is possible to transmit data to server(PC) without receiver because of wire communication•
function(Ethernet and RS-485).
•Professional Installation Requirement: Please acknowledge your understanding that this device
must be professionally installed
•If the antenna is broken, please contact our A/S center. We will replace the antenna as soon as
possible.
C o p yrig h t 2 0 1 3 E C O S E N S E C o ., L td.ⓒ
A ll r ig h ts re serv e d
5 / 1 7