USER MANUAL
IMPORTANT INFORMATION REQUIRED BY THE FCC
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Controller Set-up:
1. Charge the battery by plugging the guitar into a controller port
on your Playstation 2 system. A solid green light indicates that
the battery is charging. When the green light goes off, the battery
is fully charged.
CAUTION: The Shredmaster controller is fully functional when
plugged in for charging.
2. Connect the included receiver to control port 1 of your PlayStation
2 console. Note: if using multiple Rock Guitars, connect each
receiver to a different control port.
3. Power your PlayStation 2 system “ON”. The wireless receiver should
display a solid red light and a blinking green light.
4. power “ON” your wireless Rock Guitar controller by sliding the power
switch to the “ON” position. once a connection is established, the
green light should remain solid.
5. The Shredmaster controller features an auto-sync function that will
automatically connect your controller to the receiver. If
Shredmaster controller does not connect, press the “CONNECT” button
on the included receiver. When the red light starts flashing, press
the “CONNECT” button on your Shredmaster controller to complete the
connection.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.